The IMX415 8MP High SNR Low Light Camera Module for Raspberry Pi and Luckfox is a compact CMOS camera with a 95.5° wide-angle lens, delivering high image quality, low noise, and strong low-light performance. Designed for vision systems, AI applications, and CSI-based projects. Waveshare IMX415 8MP Camera (A)

microSDHC memory card with a capacity of 128GB, Class10 UHS-I U1 speed class, maximum read speed of up to 100MB/s, supplied with an SD adapter. GoodRam M1AA-1280R12

The adapter allows you to connect the antenna with a standard 75 Ω connector to the device with the MCX connector. The cable length is 13cm, it is often used in USB DVB-T tuners

2.5V reference voltage source. The system operates at a temperature of -40 to +85 degrees Celsius, has a precision of 1% and a conductive current of max. 10mA. The system is housed in a SOT23-3L housing

This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver a continuous 21 A without a heat sink.

9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. Color: COOL WHITE.  Adafruit 2974

Active GNSS L1/L2/L5 Quadrifilar Helix antenna with SMA male connector, supporting GPS, BDS, GLONASS, and Galileo. High gain, low noise figure, RHCP polarization, and IP67-rated enclosure for outdoor applications. Q39 version with wide-body design for stable signal reception. Waveshare Q39 GNSS Helical Antenna

FDC6420C; MOSFET N / P transistor; SSOT-6, Fairchild / On Semiconductor

5-inch DSI display with 720 × 1280 px resolution featuring an IPS panel and 5-point capacitive touch, manufactured using optical bonding technology with a toughened glass surface. Version with a black protective enclosure designed exclusively for Raspberry Pi 5, enabling clean and mechanically secured installation. Waveshare 5-DSI-TOUCH-B-WITH-CASE

Gravity: Voice Recorder Module is a sound recording module powered by 5V voltage. It can store sounds up to 10 seconds long. DFRobot SEN0197

Module with a display designed to indicate the battery level. TM1651 controller, control via the I2C interface. DFRobot FIT0466

DRV8825 Stepper Motor Driver Carrier is a DRV8825 stepper motor driver that allows you to supply a bipolar current of up to 1.5 A per phase, without using a heat sink. The system can be supplied with voltage up to 45V, in the set there is a heat sink. It is compatible with Polol 2133

Pin for BLS and BLD socket housing, brass, tinned female, NINIGI NDR-T, RoHS

ESP8266 based Arduino board for ArduCAM mini camera modules while keeping the same form of factors and pinout as the standard Arduino UNO R3 board. ArduCAM B0082

9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. Color: YELLOW. Adafruit 2948

DIP socket, 28-pin, precision, pitch 2.54mm, spacing 7.62mm, RoHS

9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. Color: GREEN. Adafruit 2972

60 GHz mmWave radar module based on the Acconeer A121 Pulsed Coherent Radar (PCR) sensor, designed for presence detection, micro-motion detection, and high-precision distance measurement. Supports USB, UART, and I2C interfaces. Standard version without holder. Waveshare A121 Range Sensor