A glass fuse with dimensions of 5x20mm and a current of 2.5A is a fast-reacting protection of electronic devices against overload, supplied in a set of 100 pieces

A glass fuse with dimensions of 5x20mm and a current of 3A is a fast-reacting protection of electronic devices against overload, supplied in a set of 100 pieces

A glass fuse with dimensions of 5x20mm and a current of 3.15A is a fast-reacting protection of electronic devices against overload, supplied in a set of 100 pieces

Module with a 3-axis LIS3DSH accelerometer. The board is equipped with a goldpin connector and communicates via the I2C or SPI interface

Driver for three-phase BLDC motors based on the TMC6300 system from Trinamic. It allows you to control the movement of drives with a voltage of 2 to 11 V and a current consumption of up to 2 A. SparkFun ROB-21867

Power monitor module that detects voltages up to 60 VDC and current up to 30 A. It uses the Allegro MicroSystems ACS37800 IC, which simplifies adding monitoring to power systems. SparkFun SPX-17873

Set of 45 DIP switches in a handy box

The expansion module (shield) is designed for Teensy 4.0 and Teensy 4.1 boards. It allows you to easily connect displays from the SmartMatrix series. Adafruit 4828

LCD TFT 1.14" display with a resolution of 135x240 pixels. Equipped with an SPI interface and two user buttons. Adafruit 4393

Diagnostic interface for wireless diagnostics of cars with OBD2 system. The device uses the popular 16-pin connector and is equipped with a Bluetooth 3.0 module. Vgate iCar2 BT3.0 Orange

Module with a digital barometer DPS310. It enables pressure measurement in the range from 300 to 1200 hPa and communicates via I2C or SPI. Adafruit 4494

32-bit microcontroller from the STM32L4 family with ARM Cortex-M4 core, 1MB Flash memory, 128kB SRAM, 48MHz, I2C, SPI, UART / USART, USB, CAN, SWPMI, 1.71 ... 3.6V, 64LQFP, STM, RoHS

Module with a smoke concentration sensor made in MEMS technology. It allows gas detection in the range of 10 to 1000 ppm and has an analog output. DFRobot SEN0570

ATECC608A cryptographic chip module. Enables adding strong security to an IoT node, edge device or embedded system. Adafruit 4314

32-bit microcontroller from the STM32F0 family with ARM Cortex-M0 core, 32kB Flash memory, 16kB RAM, 48MHz, I2C, SPI, UART / USART, USB, DMA, POR, PWM, WDT, 2.4 ... 3.6 V, A / D 13x12b, 20-TSSOP

Single-channel DC motor driver with an operating voltage from 8 to 28 V and a continuous current up to 160 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDS160A

Miniature (25x40mm) WiFi b/g/n module for surface mounting with support for TCP and UDP protocols operating in standalone and access point modes. The module is equipped with UART and Ethernet interfaces, it is also possible to control GPIO lines. Powered by 3.3V

LiDAR CS20 3D TOF equipped with a ToF image sensor with a resolution of 640 x 480 pixels. It uses ToF technology to record three-dimensional information about objects and space. It can accurately measure distances up to 5 m. DFRobot SEN0579

A small module with a 1.54" LCD display and a resolution of 240x240 pixels, equipped with a WiFi ESP-12E module. It is programmed via a USB type C connector. SB Components 25626