Category: Electronic modules

Audio amplifier with three output channels. It can be powered with the voltage from 12 to 24 V and has two outputs with a power of 50 W (left and right) and one with a power of 100 W (bass). Equipped with Bluetooth 5.0 communication

CAN transceiver module based on the TJA1051T/3 chip. Allows you to connect a board with native CAN support (the transceiver will convert 3V signals into differential CAN signals) to a network of devices. Adafruit 5708

The AC-DC converter module converts the voltage in the range of 90-264V AC to 12V DC with a maximum current of 600mA and a power of 3W. It is characterized by a long life (MTBF 100,000 h), a slow start of 50 ms, and a maximum input current of 0.2A.

Pressure sensor module with I2C interface (MPL115A2)

The Step-Down converter module converts the input voltage of 11 - 26 V to a constant 9 V, with a maximum output current of 3 A, recommended up to 1.1 A for long-term operation. The conversion efficiency of the device is 96% and the module size is 22.3 x 17 x 4.2 mm

Class D PAM8406 stereo digital audio amplifier module. The system allows you to connect two speakers with an impedance of 4 to 8 Ω and a power of 5 W per channel

Step-Up/Step-Down converter with an output voltage of 5 V, an input voltage from 3 to 15 V and a maximum current of up to 600 mA

USB port isolator based on the ADUM3160 chip. It has a built-in galvanically isolated voltage converter and is powered from the USB port

USB-RS485 converter module based on the FTDI FT232RL chip. Provides communication between USB interface and RS485 serial standard

5-megapixel HD camera module with OV5647 sensor designed for Raspberry Pi computers. The camera is equipped with a fisheye lens, the focal length is adjustable. Waveshare RPi Camera (G)

The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and a USB type A output. It enables powering devices with 15 V or 20 V and testing chargers. PDC005

Touch Sensor Switch Module for Arduino, RoHS

Stepper motor driver that can work with a voltage in the range from 20 to 50 V and a maximum current of 5.6 A. It allows you to configure the microstep in the range from 2 to 128. DM556

Module with 16-channel I/O ports expander controlled by the I2C interface. It was based on the MCP23017 chip

Class D stereo digital audio amplifier module PAM8403. The system allows you to connect two speakers with an impedance from 4 to 8 Ω and a power of 3 W

LC filter connected to the output of the DC power supply with a voltage from 0 to 50 V and a maximum current of 3 A. It reduces voltage ripple and interference caused by the power supply

Module with an incremental encoder with a rotation range of 360° and a button. Communicates via a digital interface. DFRobot SEN0235

A module with an electret microphone and an amplifier that will allow you to detect a voice, a clap or a door slam using the analog output

Module with four 240V/2A relays controlled by 5V with a fuse triggered by a high state. modSSR-4CH-H