Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214

RPLiDAR A3M1 enables 2D scanning in a 360° range with a frequency of up to 16,000 measurements per second and a range of up to 25 m, offering high precision in indoor and outdoor applications. Thanks to OPTMAG technology and a compact design, it is recommended for robotics, SLAM systems, mapping, and environment analysis.

LHT52 Indoor LoRaWAN Air Temperature and Humidity Sensor US915 Seeed Studio 101990984 is a wireless air temperature and humidity sensor designed for smart home systems, offices, and industrial applications. Thanks to battery power, data logging, and LoRaWAN compatibility, it is suitable for environmental monitoring, building automation, and precision agriculture.

Seeed Studio 101990982 is a professional RS485 soil sensor that enables simultaneous measurement of moisture, temperature, and electrical conductivity at four different depths. With its robust design and IP68 protection, it is suitable for long-term applications in agriculture, greenhouses, and environmental monitoring, providing reliable data for irrigation and crop optimization.

PmodCMPS2 is a module with a digital magnetometer based on the Memsic MMC34160PJ system. It has a resolution of 0.5 mG (within ± 16) and accuracy up to 1 °. For communication with the module, an I2C interface is provided on the 6-pin Pmod connector. Digilent 410-355

Seeed Studio 114993078 SenseCAP S2107 is a precise and reliable PT1000 temperature sensor operating on the LoRaWAN network. With its robust IP66 design, long battery life, and easy Bluetooth configuration, it is ideal for applications such as food monitoring, cold storage, industrial boilers, aquaculture, and liquid detection.

The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5240

Module with a pulse sensor (heart rate). The board is equipped with a Grove connector and a digital output in the form of pulses. Seeed Studio 101020033

PmodACL - 3-axis Accelerometer

RPLIDAR A1M8-R6 is a compact 2D laser scanner for use in robot navigation, localization, and environment mapping, offering 360° scanning with a range of up to 12 m and sampling up to 8000 Hz. Ideal for SLAM systems and indoor environments.

Ultrasonic distance sensor MB1030 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 793

Optical distance sensor in the range of 10-80 cm with an analogue output, power supply 4.5-5.5V.

Module with a gesture sensor PAJ7620U2, which allows to recognize up to 13 gestures. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020083

Module with a CO2 sensor based on the XENSIV PAS CO2 system from Infineon. It enables precise measurement of CO2 concentration in ppm via I2C, UART and PWM interfaces. SparkFun SEN-2295

SEN-14347

Module with ultraviolet (UV) sensor based on the GUVA-S12D system. It allows measurement of radiation with a wavelength in the range from 240 to 370 nm. The module has a connector in accordance with the Grove standard. Seeed Studio 101020043

Module with a light sensor based on the APDS-9002 system. With the aid of this system, it is possible to measure the intensity of illumination in lux. The module has a connector in accordance with the Grove standard. Seeed studio 101020076

Module with a magnetic sensor based on the CT10 reed switch. CT10 is a unipolar reed switch, normally open. The sensor reacts to the action of an electromagnet, permanent magnet or a combination thereof. The module has a connector in accordance with the Grove standard. Seeedstudio 101020038

The Hall sensor module allows magnetic field detection, can be used to measure angle of rotation, displacement, mechanical vibrations, etc. The module has a connector in accordance with the Grove standard. Seeed studio 101020046

A compact evaluation board that allows you to quickly connect the FLIR Lepton thermal imaging camera module to a Raspberry Pi or your own hardware projects. The board provides a local 3-5.5V power supply and an on-board clock necessary for proper module operation, with the option to bypass these components via a jumper. FLIR Lepton Breakout Board v2.0