

The sensor allows detecting objects at a distance of 10 to 80 cm. The output is an analog signal, the value of which depends on the distance between the detected object and the sensor. The closer the object is, the higher the output voltage.
A simple example of the GP2Y0A41SK0F sensor operation (measured distance is from 4 to 30 cm):
2-core connection cable, 15 cm long. Completed on one side with a 2x1 JST connector, and on the other with a 2mm pitch. CAB_E
JST-PH three-wire connection cable, 30 cm long, 2 mm grid
Extension board with distance sensor ToF VL53L1, The sensor has a range of up to 400 cm. The kit includes 2 modules with sensors that can be connected via a 10-pin connector. The shield is compatible with STM32 Nucleo boards and has an Arduino UNO R3 connector. STMicroelectronics X-NUCLEO-53L1A2
Laser distance sensor with a measuring range of up to 2 m, based on the ToF measurement technique. Communication via the I2C interface
No product available!
Ultrasonic ToF sensor dedicated to the identification of materials at a distance of 2 to 10 cm. It can distinguish between hard and soft materials and transmits information via digital IO (high/low) or UART interface. DFRobot SEN0560
Laser scanner measuring 360 degrees, taking samples at a frequency of up to 5 kHz. It is capable of generating 2D point map information within a 12-meter radius. Waveshare D500 LiDAR Kit
Distance Sensor Breakout VL53L1X is a distance sensor with a range of 4m and a supply voltage of 2.6 ... 3.5V. Communication with the sensor takes place via the I2C interface. SEN-14722
ToF distance sensor module based on the VL6180X system. It offers a range of up to 10 cm and communicates via the I2C interface. Adafruit 3316
The infrared distance sensor enables the detection of objects in the range from 3 to 50cm. The sensor has a digital output, the detection threshold is adjusted by a potentiometer. DFRobot SEN0164
Advanced 2D laser scanner (LIDAR) with a 360-degree range. It offers a range of up to 12 meters and a dead zone of 0.05 meters and a scanning frequency of 10 Hz (600 rpm), which gives a sampling speed of 5 kHz and an angular resolution of 0.72°. Seeed Studio 101090061
Laser scanner (Lidar) 360 degrees with a measurement frequency of 10 Hz and 16,000 measurements / second. Range up to 25m, measuring error at 1%. Sparkfun SEN-15045
No product available!
No product available!
Ultrasonic distance sensor RCW-0001 with a measuring range from 1 to 450 cm and a resolution of 1 mm. It is compatible with the popular HC-SR04 sensor. RCW-0001
No product available!
Ultrasonic distance sensor module with a range of up to 7.5m enclosed in a waterproof and dustproof housing. It is compatible with 3.3V or 5V devices such as Arduino, Raspberry Pi DFRobot SEN0313
Distance sensor module operating in TOF technology, operating range 4-400 cm, resolution up to 1 mm. Communication with the sensor via the I2C bus. Power supply through a built-in regulator with voltage from 2.6 to 5.5 V. Pololu 3415
Module with a digital distance sensor with a range of up to 5 cm. It has a digital output that goes low when an object is detected. Pololu 4050
Laser scanner using ToF technology. It takes measurements at up to 10 revolutions per second and has a range of up to 25 m. Waveshare DTOF LIDAR STL27L
Module with the 3-channel distance sensor OPT3101. The sensor has a range of up to 1 m, a wide viewing angle of up to 180° and communicates via the I2C interface. Pololu 3680
Optical distance sensor in the range of 10-80 cm with an analogue output, power supply 4.5-5.5V.