Precise, 3-axis geomagnetic sensor based on FlipCore and TMR technology, offering high interference immunity and a wide measurement range of ±2000μT with a resolution of 0.1μT. Thanks to its high sampling rate (up to 400Hz) and resistance to magnetic shocks, it is ideal for AR/VR systems, AGV navigation and drone control. DFRobot SEN0622

Compact module for bidirectional current measurement using the galvanically isolated Allegro ACS37200LLXTR-100B5 Hall-effect sensor. It provides a ±100 A range, 20 mV/A sensitivity, 150 kHz bandwidth, and a response time below 4 µs. Pololu 5783

Module with a digital temperature and humidity sensor based on the SHT31. Communication via the I2C interface. DFRobot SEN0331

The VCNL4200 sensor module combines distance detection and ambient light measurement, ideal for applications such as robotics and home automation. Thanks to infrared technology, the detection range is up to 1.5 meters, and the built-in ALS sensor allows you to measure light intensity in the range of 0.003 to 1570 lux, making it a versatile solution for monitoring lighting conditions. Adafruit 6064

Current measurement module with the galvanically isolated Allegro ACS37200LLXTR-200B3 Hall-effect sensor. It provides a ±200 A bidirectional range, 6.6 mV/A sensitivity, 150 kHz bandwidth, and a response time below 4 µs. The large carrier board facilitates high-current connections. Pololu 5792

Measurement module with a digital SHTC3 sensor, designed for measuring temperature and relative humidity. It offers a temperature measurement range from -40°C to 125°C with an accuracy of ±0.2°C and a humidity measurement range from 0% to 100% RH with an accuracy of ±2% RH. Communication is provided via I2C at address 0x70. Soldered 333032

Air quality sensor module based on the ENS160 system. It communicates via the I2C or SPI interface. DFRobot SEN0515

Module with liquid turbidity sensor. It allows you to measure the amount of suspended particles in a liquid. The sensor can operate in two modes: digital and analog.

Current measurement module using the galvanically isolated Allegro ACS37200LLXTR-100B5 Hall-effect sensor. It provides a ±100 A bidirectional range, 150 kHz bandwidth, response time below 4 µs, and an extra-low current path resistance of approximately 0.05 mΩ. Pololu 5793

This module allows for simultaneous distance measurement up to 300 mm and illuminance measurement from 0.004 to 16,768 lux. Based on the Vishay VCNL4030 sensor, the system communicates with a microcontroller via I2C and works with 3.3V and 5V logic, making it compatible with platforms such as Arduino and Raspberry Pi. The board is equipped with STEMMA QT and Qwiic connectors for quick, solderless connection. Adafruit 6491

Flexible pressure sensor with dimensions of 40 x 40 mm. Designed to detect static and dynamic pressure at high reaction speed. DFRobot SEN0296

Compact current measurement module using the Allegro ACS37100LMATR-050B3 TMR sensor with a galvanically isolated current path. It enables bidirectional current measurement in the ±50 A range, offering measurement bandwidth up to 10 MHz and a short response time of approximately 50 ns. Pololu 5477

This 3-axis magnetometer provides precise magnetic field measurement in the X, Y, and Z axes within a range of ±40 mT or ±80 mT. The system is equipped with a 12-bit ADC and a CORDIC angular calculation engine, which allows for positioning within a range of 0–360°, making it suitable for applications such as magnetic encoders, robotics, and positioning systems. Communication is via an I2C interface with CRC support and speeds up to 1 MHz, and the module is compatible with 3.3V and 5V logic. STEMMA QT/Qwiic connectors enable quick connection. Adafruit 6489

Pololu Carrier for Sharp GP2Y0D810Z0F and GP2Y0D805Z0F Sensors

The Pololu 5318 current sensor provides electrically isolated unidirectional AC and DC current measurement from 0 A to 50 A. Based on the Allegro CT433-HSWF50DR with TMR technology, the module offers up to 1 MHz bandwidth and an analog interface. Pololu 5318

IMU module based on the Bosch BHI385, integrating a 3-axis accelerometer, 3-axis gyroscope and a 32-bit ARC EM4 processor for sensor data processing. Bosch BSX sensor fusion provides outputs including 3D orientation, step counting, tap detection and wrist gesture recognition without requiring these calculations to be performed by the host microcontroller. Soldered 333375

Grove module with a proximity sensor, light, color and the ability to detect gestures. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020580

SCT010T-D 10A 5V AC Current Sensor. Enables measurement of high AC currents. modSCT010T-D

Module with a 3-axis magnetometer based on the BMM150 system. It communicates via the I2C or SPI interface. DFRobot SEN0419

Vibration sensor with analog output. It is able to detect a wide range of vibrations. It can also be used for impact detection. 801S