Category: Main categories
Subcategories
There are 23386 products.
Arduino DMX Receiver enables precise control of the brightness of up to four low-voltage lighting channels via a DMX signal, making it suitable for professional and hobbyist lighting systems requiring PWM support and RGBW configuration.
ESP32-S3-USB-OTG board with Wi-Fi, BLE, and USB-OTG for creating modern IoT projects and USB devices. Espressif ESP32-S3-USB-OTG
RGB LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection class IP65 (waterproof)
White LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection class IP65 (waterproof)
Module with replaceable LED diodes in 4 colors: red, green, blue and white. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020228
White LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection level IP21
Module with 15 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020172
Rigol DP831 is an advanced 160W programmable laboratory power supply, offering three independent channels with precise voltage and current regulation, with a maximum voltage of 30V and current of 5A on the main channel. It has short circuit protection, current limiting and remote control functions via LAN, USB, RS232 and GPIB interfaces, making it an ideal tool for professional laboratories and R&D departments.
The 25-meter RG6U CCS coaxial cable features a 1 mm copper-coated steel core and a shield composed of 48 aluminum wires and aluminum foil, providing effective protection against electromagnetic interference. With a 75 Ω impedance and an outer diameter of 6.8 mm, it is ideal for television and satellite installations.
The GPRS8000-S module enables the integration of cellular connectivity in embedded projects based on Embest development boards. It offers support for data transmission, SMS, and voice calls in GSM/GPRS networks with a wide range of communication interfaces.
Red LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection class IP65 (waterproof)
Intermediate module of the communication system based on QwiicBus. It allows you to extend the range of the I2C bus. SparkFun COM-18000
A set for building a digital LED clock designed to work with the Raspberry Pi Pico. It has a built-in precision RTC DS3231 chip, light sensor, buzzer and configuration buttons. Waveshare Pico-Clock-Green-EN
A prototype module with a VGA and PS2 connector and a goldpin connector with the pins out of the interfaces. Waveshare VGA PS2 Board
Module with a capacitive fingerprint sensor. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 101020713
Module with 3-color e-Paper display with a diagonal of 2.13" and a resolution of 212x104 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.13-B
Module for recording sounds, which can store recordings up to 20 seconds. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 107020007
4.3-inch e-paper display with 800x600 resolution. The display is equipped with the HX8705-B controller. The display is perfect for energy-saving devices, because it does not require power to display the image
The REBEL self-vulcanizing tape, measuring 0.8 mm × 19 mm × 2.5 m, is designed for electrical insulation, cable repairs, and protection of connections against water and moisture. It provides a durable, flexible, and watertight seal resistant to high temperatures, pressure, and environmental conditions. Suitable for service, automotive, and installation work, including underwater and outdoor applications.