Category: Main categories

Raspberry Pi Compute Module 3+ Lite (CM3 +) is a SoM module containing key elements of the Raspberry Pi 3 A + / Raspberry Pi 3 B + computer, including Broadcom BCM2837B0 processor, 1 GB RAM (LPDDR2). The module is equipped with a 200-pin SODIMM connector.

Raspberry Pi Compute Module 3+ (CM3 +) is a SoM module containing key elements of the Raspberry Pi 3 A + / B + computer, including Broadcom BCM2837B0 processor, 1 GB RAM, 8 GB eMMC memory. The module is equipped with a 200-pin SODIMM connector.

Raspberry Pi Compute Module 3+ (CM3 +) is a SoM module containing key elements of the Raspberry Pi 3 A + / B + computer, including Broadcom BCM2837B0 processor, 1 GB RAM memory, 32 GB eMMC memory. The module is equipped with a 200-pin SODIMM connector.

Module with 16 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4256

The CB 1241 communication module for SIMATIC S7-1200 extends the functionality of the control system by providing an RS485 interface for point-to-point communication at distances of up to 1000 meters. It supports various communication standards such as Modbus RTU and ASCII, and provides diagnostics, while its IP20 degree of protection and wide operating temperature range ensure reliability in harsh environments. Siemens 6ES7241-1CH30-1XB0

A set of test leads 2x4 (4 signal and 4 GND) with a length of 23cm intended for logic analyzers Saleae to cooperate with a ready-made connector on a PCB (both ends terminated).

Ultrasonic distance sensor (sonar) with a measuring range from 50 cm to 10 m. It allows you to read data through one of three interfaces: variable width pulse, analog output or UART TTL interface. DFRobot SEN0271

Extension board with stepper motor controller based on the STSPIN820 system. Ideally suited for use, among others in 2D / 3D printers, robots, cameras. Pololu 2879

Module with bi-directional current sensor based on the INA226 system. It allows you to measure current and power, works with a voltage of 0-36 V. It has an I2C interface.

The IoT module combining Wi-Fi and Bluetooth (BLE) technologies, which is designed for a wide range of applications, from low-power sensor networks to the most demanding tasks such as voice coding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32D 128MBit

TF Mini LiDAR is a one-way rangefinder that is based on ToF (Time of Flight) technology. It consists of high quality optical and electrical devices that provide stability, high sensitivity and precision. Sparkfun SEN-14786

Shield with LTE CAT M1/NB-IoT SARA-R4 modem. Compatible with Arduino. Hologram SIM card included. SparkFun CEL-15087

3-color e-Paper display with a diagonal of 5.83" and a resolution of 600x448 px. SPI interface. Without PCB. Waveshare 5.83inch e-Paper (C)

Module with black and white e-Paper display, 5.83" diagonal and 648x480 px resolution. Communication via SPI interface. Waveshare 5.83inch e-Paper HAT

The development board allows you to easily use the capabilities of ESP32 (Wi-Fi + Bluetooth BLE) from Espressif. There is a USB / UART converter on the board, and most of the GPIO line of the ESP-WROOM-32D module has been connected to pins with a pitch of 2.54mm. ESP32-DevKitC V4

The Terasic VEEK-MT2 set provides a complete hardware-software platform for designing embedded and multimedia systems using FPGA chips. It enables the creation and testing of interactive, control, and measurement applications thanks to an extensive base of interfaces, memory, and sensors.

The robot can recognize the attitude in real time using an acceleration and gyroscope sensor, as well as achieve balance by controlling the motors to adjust the position. Terasic P0582

An advanced device that allows you to track and analyze real-time code executed on a core with Cortex-A, Cortex-R and Cortex-M. Segger J-Trace PRO for Cortex (8.20.00)

Standard analog servo with plastic gear. It has a 180° range of motion and derived feedback output. Pololu 3441

Module with ADC 16-bit converter for Raspberry Pi Zero / Zero W / 2B / 3B / 3B + with I2C communication interface.