Category: Main categories

A single-channel DC motor driver with an I2C interface. It is powered from 4.5 V to 48 V and can deliver up to 2.2 A of current. A board with connectors for mounting. Pololu 5061

A single-channel DC motor driver with an I2C interface. It is powered from 4.5 V to 48 V and can deliver up to 2.2 A of current. A board with soldered connectors. Pololu 5060

Laser distance sensor with a measurement range of 0.3 m to 2 m. It communicates via the UART interface. Benewake TF-LC02

Adapter Akyga AK-AD-41 enables the connection of devices with HDMI and DVI-D 24+1 outputs, offering digital video signal transmission without quality loss. Gold-plated contacts and a solid ABS housing ensure durability and stable connection. The adapter is used for integrating computers, TVs, projectors, and other multimedia devices in configurations requiring conversion between HDMI and DVI, both in home and professional applications.

The clamp meter allows you to measure AC voltage up to 600 V, AC current up to 3000 A, resistance and frequency. Equipped with a flexible measuring coil. Uni-T UT281E

Mini Jack to USB-A adapter, designed for Apple MP3 / MP4 devices, enabling charging and data transfer thanks to a 15-cm cable. It is compatible with the Apple iPod shuffle 1 and 2, and make sure the connection is compatible before connecting it to your car stereo. Akyga AK-AD-24

Adapter called the "barrel", allows you to change the end of the RS-232 cable from female to male or connect two female cables. It is characterized by nickel-plated plugs, aesthetic silver design with yellow accents and works in the temperature range from 5 to 50 ° C. Akyga AK-AD-17

The two-channel function/arbitrary generator allows you to generate sinusoidal, square and triangular signals or to add noise to the signal. It provides modulations such as AM, PM, FM, ASK, FSK. Equipped with a clear 4,3" LCD display and USB interface. Uni-T UTG2025A

The laboratory meter allows you to measure AC and DC voltage, AC and DC current, resistance, capacity and frequency. Equipped with, among others with diode tester, continuity test, automatic backlight and USB interface. Uni-T UT8802E

The clamp meter allows you to measure the ground system without disconnecting the circuit ground line. It can measure resistance from 0.01Ω with a resolution of 0.001Ω and leakage current up to 30A. Uni-T UT275

Laboratory multimeter that allows you to measure AC and DC voltage, AC and DC current, resistance, capacity and frequency. Uni-T UT805A

The clamp meter allows you to measure alternating current up to 3000 A. Equipped with a flexible measuring coil. Uni-T UT281C

Insulation tester for measuring the insulation resistance of electrical equipment. The device can measure insulation resistance, AC voltage, PI (Polarization Index) and DAR (Dielectric Absorption). Uni-T UT501B

Laser distance meter with a range of up to 80m and a resolution of 1mm. Equipped with a 2" display. It can measure length, area and volume with the push of a button. Uni-T LM80

Expansion module designed for Raspberry Pi Pico boards. Allows you to add CAN bus based communication to your project. Waveshare Pico-CAN-B

A robot controller based on the ESP32-WROOM-32 module. Provides a wide range of functionality and support for various applications, including WiFi, Bluetooth and ESP-NOW wireless communication. Waveshare General Driver for Robots

M12 mount lens. It has a focal length of 2.7 mm mm and a 113° FoV viewing angle. It is designed to work with the Raspberry Pi HQ M12 camera. Waveshare WS1132712

M12 mount lens. It has a focal length of 3.2 mm mm and a 160° FoV viewing angle. It is designed to work with the Raspberry Pi HQ M12 camera. Waveshare WS1603212

M12 mount lens. It has a focal length of 8 mm mm and an FoV viewing angle of 69.5°. It is designed to work with the Raspberry Pi HQ camera M12. Waveshare WS0698012

M12 mount lens. It has a focal length of 2.72 mm and a FoV of 184.6°. It is designed to work with the Raspberry Pi HQ M12 camera. Waveshare WS1842714