Category: Main categories

Waterproof momentary button with a diameter of 12 mm and a height of 25 mm in a stainless steel housing. Red color

DC motor driver that allows you to control the movement of two drives using the I2C interface. Board without connectors. Pololu 5050

Waterproof momentary button with a diameter of 12 mm and a height of 25 mm in a stainless steel housing. Blue color

A module with an acceleration and rotational speed sensor based on the LSM6DS3TR-C system and the LIS3MDL magnetometer. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 5543

A module with a microSD card slot and a pin connector (2.54 mm pitch). It has a built-in voltage regulator and a voltage level converter. The SPI interface lines are led out on the connector

FLUX LED 7.62 x 7.62 [mm] 5mm ultra blue, angle 90 degrees; light intensity 400 mcd (20mA) (3.2V) df 470nm 0.6 [lm]

Probe for measuring direct and alternating current up to 100 A. It works in the 2,5 MHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100B

Probe for measuring direct and alternating current up to 100 A. It works in the 800 kHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100A

DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for assembly. Pololu 5049

DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5051

Module with 7-color ACeP e-Paper display, 5.7" diagonal and 600x448 px resolution, equipped with Raspberry Pi Pico W. Pimoroni PIM625

LED 5 mm OVAL ultra white, angle 130 degrees / 70 degrees; light 3000 mcd (20mA) (3.2V)

A miniature linear actuator that has a stroke range of up to 50 mm at a speed of 3 to 5 mm/s. It has a built-in motor and is powered by a voltage of 3 to 6 V

A miniature linear actuator that has a stroke range of up to 130 mm at a speed of 3 to 5 mm/s. It has a built-in motor and is powered by a voltage of 3 to 6 V

Module with a processor equipped with 8 ARM Cortex-A78AE v8.2 cores and the NVIDIA Ampere graphics chip consisting of 1792 cores supporting CUDA technology. NVIDIA 900-13701-0040-000

LED 5 mm OVAL yellow, angle 130 degrees / 70 degrees; light intensity 600 mcd (20mA) (2.2V), df595 nm

Inductive proximity sensor with NPN NO output. It can detect the presence of metals at a distance of up to 4 mm. The sensor is supplied with the voltage of 5 V and consumes a current of up to 30 mA. E2S-H4N1

Starter kit containing Raspberry Pi 4B 2 GB and all necessary accessories: 32 GB microSD memory card with Rasberry Pi OS system, Ethernet cable and official accessories: housing, cooling kit, power supply and HDMI cable

DC motor driver that allows you to control the movement of two drives using the I2C interface. Board without connectors. Pololu 5059

DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for assembly. Pololu 5052