Category: Main categories

A 24 V warning lamp with red, green and yellow signaling. The device is additionally equipped with a buzzer

MCP16301T-I/CHY, High-Voltage Input Integrated Switch Step-Down Regulator, SOT-23-6

Rechargeable soldering station with digital temperature control from 100 to 400°C and LCD touch screen. Equipped with a 40W WMRP precision soldering iron and a stand with a cleaning sponge. Has ESD protection. Weller WSM 1C

2.4 "TFT LCD display module with touch panel with SD card slot. Resolution 240x320. Based on the ILI9341 controller. Powered by 3.3V or 5V.

Digital microscope with USB interface. It is equipped with a 2MPx image sensor with a magnification factor up to 500 times. Andonstar A1

Kit with IPS 13.3" LCD display dedicated to Raspberry Pi CM4 modules. It allows you to build a portable minicomputer. Waveshare 13.3inch PiPad C4 (EU)

A bionic dog that is an ideal tool for learning programming and studying the movement of four-legged robots. Dedicated to work with Raspberry Pi 4B minicomputers. Waveshare WAVEGO (EU)

A bionic dog that is an ideal tool for learning programming and studying the movement of four-legged robots. Dedicated to minicomputers Raspberry Pi 4B or ESP32 modules. Waveshare RPI WAVEGO ACCE (EU)

USB based DAQ device with 8 SE/4 DIFF analog inputs, up to four analog outputs, 16 digital inputs/outputs and one 32-bit counter. It offers 13-bit resolution and a sampling rate of 1 MS/s. Digilent 6069-410-017

DAQ device based on USB communication and equipped with 8 SE analog inputs, 8 digital inputs / outputs and one 32-bit counter. It offers 16-bit resolution and a sampling rate of 100 kS / s per channel. Digilent 6069-410-015

Module with real-time clock and CR1225 battery socket for voltage backup. It communicates via the I2C interface. Seeed Studio 103030277

Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Comes with a enclosure. Digilent 471-044

Base board dedicated to Raspberry Pi CM4 modules. It is equipped with two Ethernet connectors, a microSD slot and a USB connector. It allows you to build a router. Seeed Studio 103110042

Module with pulse and SpO2 level sensor (oxygen saturation level). The module is based on the MAX30102 chip and communicates via the I2C interface.

Module with temperature, humidity and pressure sensor BME680 from Bosch. The module communicates via I2C or SPI interfaces.

Acrylic housing designed for Seeeduino XIAO Expansion Board modules. Provides good protection against damage and has a dedicated space for the battery. Seeed Studio 110010024

A set of 40 modules with Grove connectors for Arduino. It includes a package of the most popular sensors, such as light, sound, touch sensors, distance sensor and accelerometer, as well as LED modules and buttons. Seeed Studio 110020230

Single point LIDAR based on ToF (Time of Flight) distance sensor with measuring range up to 8 m with a resolution of 1 cm. Thanks to the unique optical construction it can achieve stable, accurate and very sensitive measurement. Benewake TF-Luna

Aluminum enclosure dedicated to the Ettus USRP B205mini-i. It protects the plate against mechanical damage by increasing the operating temperature range. Digilent 6002-240-011

Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Digilent 6002-410-022