Category: Main categories

USB - RS485/RS422/RS232 converter designed to convert USB signal to serial signal. It is used to connect devices with USB interface to RS485, RS422 or RS232 network. It uses ADI (Analog Devices iCoupler) galvanic isolation technology. EVC8013B

USB - RS485 converter designed to convert USB signal to serial signal. It is used to connect devices with USB interface to RS485 network. It uses the galvanic isolation technology of ADI (Analog Devices iCoupler). EVC8001

HMI (Human-Machine Interface) operator panel for visualization and interaction with automation systems. It uses a 7" LCD display with 800x480 pixel resolution with a touch panel. It supports various communication protocols such as RS232, RS485 and Ethernet. Kinco GL070E

HMI (Human-Machine Interface) operator panel for visualization and interaction with automation systems. It uses a 7" LCD display with 800x480 pixel resolution with a touch panel. It supports various communication protocols such as RS232, RS485. Kinco GL070

HMI (Human-Machine Interface) operator panel for visualization and interaction with automation systems. It uses a 4.3" LCD display with 480x272 pixel resolution with a touch panel. It supports various communication protocols such as RS232 and RS485. Samkoon EA-043A

Universal programmer for EEPROM, Flash (NAND and NOR), eMMC, SRAM and MCU memory. It is controlled from a computer via USB interface and Windows software. XGecu T48

Female terminal block, 2-pin. Pitch 3.5mm. Height 7.8mm. Suitable for KF2EDGR male strips with a pitch of 3.5 mm. 2EDGKN-3.5

NRF24L01 module with UART serial interface. It has a built-in antenna and a microcontroller that acts as a converter. It allows the design and testing of 2.4 GHz radio communication via a serial interface

The charger is designed for 1S and 2S LiPo batteries. It is powered by a USB type C connector. ISDT UC2

Module with two DRV8830 DC motor drivers. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 105020010

Diagnostic interface for wireless diagnostics of cars with OBD2 system. The device uses the popular 16-pin connector and is equipped with a Bluetooth 2.1 module. ELM327 Mini V2.1

The multi-voltage zener diode kit is a versatile component kit for voltage regulation, surge protection, and other electronic design and repair applications

Class D mono audio amplifier module with MAX98357 chip. It can work with a 4 to 8 Ω loudspeaker with a power of up to 3 W and communicates via the I2S interface. modMAX98357

Expansion module with a joystick and buttons, resembling a gamepad. Enables the connection of the nRF24L01 radio module, Nokia 5110 display, Bluetooth module, I2C devices and Arduino kit. modKeyPad

Thermal printer designed for printing receipts, barcodes, bitmap graphics and QR codes. It communicates via the USB/TTL/RS232 serial interface, it can be operated e.g. by Arduino

SDR (software-defined radio) receiver with a frequency range from 25 to 1760 MHz. It can work as a radio receiver or a broadband scanner. S300U RTL2832U SDR

Adapter from 16-pin OBD2 connector to DB9 connector on a 100 cm long cable

A miniature version of the Raspberry Pi computer, equipped with a 1 GHz processor, 512 MB of RAM and WiFi and Bluetooth 4.1 wireless connectivity with BLE support. Version with soldered connectors. Raspberry Pi SC0020

Diagnostic interface for wireless diagnostics of cars with OBD2 system. The device uses the popular 16-pin connector and is equipped with a Bluetooth 2.0 module. ELM327 Mini V1.5

Power cable with built-in Power Delivery (PD) trigger with operating voltage from 5V to 20V. It has a USB Type C connector and an XT60 female plug. ToolkitRC SC100