Category: Main categories

Balancer allows you to equalize the voltage of the packets\' target during charging, so that the packages will be much longer operational. The balancer works with LiPo batteries (lithium-polymer) and LiFe (lithium-iron) with a number of cells from 2 to 6. In addition, the device has the function of unloading the packets

IMAX B3 AC is a compact mains charger for LiPo (lithium-polymer) 2S 7.4 V and 3S 11.1 V packages with a built-in balancer

DC motor set with a two-sided shaft and a matching 66mm diameter wheel with the tire. HC02-48

A set of crawler wheels for constructing a 1:10 robot. The size of one set: 250 x 47 x 38 mm, rubber tracks with high adhesion

Pin strip straight in green, single-row, female, 1x6, pitch 2.54mm, THT, RoHS. PB06S GREEN

Pin strip straight in yellow, single-row, female, 1x8, pitch 2.54mm, THT, RoHS. PB08S YELLOW

Pin strip straight in red, single-row, female, 1x8, pitch 2.54mm, THT, RoHS. PB08S GREEN

Pin strip straight in green, single-row, female, 1x10, pitch 2.54mm, THT, RoHS. PB10S GREEN

The L78L33ACU voltage regulator provides 3.3 V output at up to 100 mA with low quiescent current. It is intended for low-current electronic applications where voltage stabilization with input up to 30 V is required.

Pin strip straight in red, single-row, female, 1x10, pitch 2.54mm, THT, RoHS. PB10S RED

The arduino turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. SEN0189

Converter designed to connect 5G communication via an Ethernet or USB3.1 connector. Compatible with modules equipped with M.2 Key B connectors. Waveshare 5G M.2 TO Gigabit ETH (EU)

GY-9255 is a 9 Degrees of Freedom (9DoF) module with the InvenSense MPU-9255 chip. It has a built-in gyroscope, accelerometer and magnetometer

Cable that allows you to attach the ATMEL-ICE programmer to the development kit with any connector (supported by the programmer), via single pin plugs (goldpin)

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-200mm

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-300mm

FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-500mm

A set with a SIMCom 5G SIM8262E-M2 module designed to connect 5G communication via an Ethernet or USB3.1 connector. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8262E-M2 5G M.2 TO ETH (EU)

Curved soldering tip with a 0.5mm diameter tip for WEP 926 soldering station