e-Paper E-Ink display driver Shield for Arduino - Waveshare 15082
ID: 1180747
zł66.53
Tax included
zł54.09 tax excl.
Driver for e-Paper displays in the form of an overlay for Arduino and Nucleo. The SPI interface is used for communication with the controller. Waveshare e-Paper Shield
Description
Driver for e-Paper displays in the form of an overlay for Arduino and Nucleo boards. The SPI interface is used for communication with the controller. There is a voltage level converter on the board, thanks to which the module can work with voltages of 3.3 V and 5 V. The user has at his disposal an external RAM memory with a capacity of 128 kB and a microSD card slot for storing graphics. Full documentation with sample programs is available on the product page.
Features
- Driver for e-Paper (e-Ink) displays
- The connector is compatible with Arduino Uno Rev3
- Interface: SPI (3-wire or 4-wire)
- Converter of voltage levels 3.3 / 5V
- 128 kB RAM memory
- MicroSD card slot
- Dimensions: 53.34 x 53.34 mm
Kit contains
- e-Paper Shield
- 24-pin FFC cable
- FFC cable adapter
1180747
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.42
Delivery date unknown
No product available!
STM32 Nucleo development board for STM32 F4 series - with STM32F401RE MCU, 512KB flash memory, STM, RoHS
zł65.92
24h
Available quantity: 5
Available
STM32 Nucleo development board for STM32 L1 series - with STM32L152RE MCU, 512KB flash memory, STM, RoHS
zł84.01
24h
Available quantity: 6
Available
E-Ink display (ePaper) with a diagonal of 2.9 "and a resolution of 296 x 128 pixels with a SPI controller. Waveshare 2.9inch e-Paper (B)
zł58.82
Delivery date unknown
No product available!
E-Ink display (ePaper) with a diagonal of 1.54 "and a resolution of 200 x 200 pixels with a SPI controller. Waveshare 1.54inch e-Paper (B)
zł38.43
Delivery date unknown
No product available!
Module with e-Paper display, 2.7" diagonal and 264x176 px resolution. Communication via SPI interface. Waveshare 2.7inch e-Paper HAT
zł89.83
24h
Available quantity: 9
Available
Other products in the same category (16)
The expansion module (shield) is designed for Feather nRF52840 boards. It enables easy connection of 16x32, 32x32 and 64x32 matrix displays. Requires self-assembly. Adafruit 4702
zł41.46
24h
Available quantity: 2
Available
Module with I2C driver based on the HT16K33 system. It is equipped with STEMMA QT connectors and is dedicated to 8x8 LED matrix displays with a diagonal of 1.2". Adafruit 1048
zł32.51
24h
Available quantity: 2
Available
The driver with the TPIC6C596 system allows you to control 7-segment displays using three signal lines. Serial connection of controllers is possible. SparkFun WIG-13279
zł49.35
24h
Available quantity: 1
Available
The LED_CGG128064M-XXW is a white LED backlight designed for COG displays of the "CF" series and graphic displays of the "MN" series. It operates at a voltage of approximately 3.3 V with a maximum current of 20 mA.
zł4.21
24h
Available quantity: 10
Available
7" Capacitive Touch Panel Overlay for LattePanda V1.0 IPS Display
zł93.34
24h
Available quantity: 3
Available
Touch panel for displays with a diagonal of 5.6 ", 126.5x101mm, resistive touchpanel, tape for ZIFF 4 1mm connector
zł34.90
24h
Available quantity: 1
Available
Touchpanel for 128x64 A-series displays, 81.8x52.2mm, 2.54 mm IDC connector
zł17.90
1 weeks
No product available!
I2C converter for 2x16 / 4x20 characters, RoHS alphanumeric displays
zł7.02
24h
Available quantity: 43
Available
FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-500mm
zł14.42
4 weeks
No product available!
This is a very special adapter, specifically used for adapting our RTD266X driver boards that have 50-pin TFT connectors to use 40-pin TFTs. Please note the adapter cannot be used the other way around! As an addition, we add in an AR1100 resistive touch controller. Adafruit 3305
zł88.15
4 weeks
No product available!
Driver for EPAPIER displays in the form of a HAT overlay for Raspberry Pi computers. The SPI interface is used for communication with the controller. Waveshare e-Paper Driver HAT
zł36.37
24h
Available quantity: 6
Available
TFT LCD driver with DPI interface dedicated to Raspberry Pi. It allows you to operate resistive touch panels. Adafruit 2453
zł117.62
24h
Available quantity: 1
Available
The expansion module (shield) is designed for Teensy 4.0 and Teensy 4.1 boards. It allows you to easily connect displays from the SmartMatrix series. Adafruit 4828
zł154.57
4 weeks
No product available!
The ESL-Gateway-AP base station is a key infrastructure component for electronic label systems based on e-paper technology. With WiFi and BLE connectivity and PoE power support, it enables centralized and wireless content management on ESL labels in commercial and industrial environments. Ideal for automated real-time labeling of shelves, products, and assets.
zł1,531.41
4 weeks
No product available!
Extension module dedicated to matrix displays with HUB75 interface. Designed for minicomputers Raspberry Pi. Adafruit 3211
zł87.44
4 weeks
No product available!
Extension module dedicated to matrix displays with HUB75 interface. Designed for Feather RP2040, M0 and M4 series tiles. Adafruit 3036
zł42.59
24h
Available quantity: 1
Available
Driver for e-Paper displays in the form of an overlay for Arduino and Nucleo. The SPI interface is used for communication with the controller. Waveshare e-Paper Shield