

Very useful peripheral module for alphanumeric LCD displays, enabling the display control via the I2C bus. It will be used in devices in which it is not possible to connect to the parallel bus LCD due to eg lack of free GPIO ports of the microcontroller. The system has a variable address which allows you to connect up to eight displays to one bus.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
LCD 2x16, 80x36mm, bez podświetlania, enhanced temperature range, RoHS
No product available!
Alphanumeric LCD 2x16 display with a pin connector, red signs, black background
LCD 2x16, 53x20mm SMALL, LED backlight (WHITE) NEGATIVE BLUE, STN, enhanced temperature range, ZIFF connector for FCC tape, 3.15mm character
2x16 display with LED backlight (AMBER) FSTN, 80x36 mm, extended temperature range "fast" 2LED backlight, (second character set - CYRIL) v.E31-FIA
Alphanumeric display 16 characters in two rows, content green, black background.
7" Capacitive Touch Panel Overlay for LattePanda V1.0 IPS Display
Extension module dedicated to matrix displays with HUB75 interface. Designed for Feather RP2040, M0 and M4 series tiles. Adafruit 3036
FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. Black EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-500mm
No product available!
FFC tape enabling seamless connection of DSI displays with the Raspberry Pi 5 minicomputer. EMI shielding foil on both sides of the tape increases anti-interference efficiency, protecting signals against interference from the environment. Waveshare Pi5-Display-Cable-300mm
Driver enabling operation of displays with an RGB-666 connector with resolutions from 480x272 to 800x600 pixels. Equipped with an ESP32-S3 microcontroller with 16 MB Flash memory and 8 MB PSRAM memory. Powered and programmable via USB Type-C connector. Adafruit 5800
The expansion module (shield) is designed for Teensy 4.0 and Teensy 4.1 boards. It allows you to easily connect displays from the SmartMatrix series. Adafruit 4828
No product available!
HDMI mini cable (male) to VGA (female). It allows you to connect displays with VGA support on a mini HDMI connector to the VGA output. Waveshare Mini HDMI Male to VGA Female Cable
Plastic semi-circular lens with an outer diameter of 40 mm. Adafruit 3853
No product available!
Module with I2C driver based on the HT16K33 system. It is equipped with STEMMA QT connectors and is dedicated to 8x8 LED matrix displays with a diagonal of 1.2". Adafruit 1048
The driver for e-Paper displays with a built-in ESP32 module that provides communication via WiFi and Bluetooth. The board allows you to display images on e-Paper displays from a computer or smartphone. Waveshare e-Paper ESP32 Driver Board
Extension module dedicated to matrix displays with HUB75 interface. Designed for minicomputers Raspberry Pi. Adafruit 3211
This is a very special adapter, specifically used for adapting our RTD266X driver boards that have 50-pin TFT connectors to use 40-pin TFTs. Please note the adapter cannot be used the other way around! As an addition, we add in an AR1100 resistive touch controller. Adafruit 3305
No product available!
The magnetic holder is an ideal solution for mounting small USB monitors or phones. It provides a stable grip and is easy to install. Waveshare Magnetic Holder
The LED_CGG128064M-XXW is a white LED backlight designed for COG displays of the "CF" series and graphic displays of the "MN" series. It operates at a voltage of approximately 3.3 V with a maximum current of 20 mA.
No product available!
Touchpanel for 128x64 A-series displays, 81.8x52.2mm, 2.54 mm IDC connector
No product available!
Touch panel for displays with a diagonal of 5.6 ", 126.5x101mm, resistive touchpanel, tape for ZIFF 4 1mm connector
I2C converter for 2x16 / 4x20 characters, RoHS alphanumeric displays