

zł82.19 tax excl.
Expansion module with an industrial interface RS485 and CAN dedicated to minicomputers NVIDIA Jetson Nano. Equipped with protection and electrical insulation. Waveshare RS485 CAN for Jetson Nano
Expansion module with an industrial interface RS485 and CAN dedicated to minicomputers NVIDIA Jetson Nano. It uses the CAN MCP2515 controller communicating via the SPI interface and the SIT65HVD230DR transceiver and the SP3485 transceiver for communication within the RS485 bus.
The module has built-in anti-electrostatic and overvoltage protection and a digital insulation system.
The board connects to Jetson Nano via a 40-pin GPIO connector, but the board can also connect to other development boards. It can be used in industrial priming applications. Full documentation and examples of use are available on the product page.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
NVIDIA module with ARM Cortex A57 1.43GHz CPU and Maxwell graphics chip consisting of 128 cores supporting CUDA technology. The module has DDR4 4GB RAM memory. NVIDIA Jetson Nano Module
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
Universal case adapted to most popular single-board computers, incl. ODYSSEY-X86J4105, Raspberry Pi, BeagleBone, and Jetson Nano. Seeed Studio 114992152
A compact and rugged baseboard designed for machine vision, robotics, and edge AI applications. It supports multiple Jetson modules, offers a wide input voltage range, and supports a rich set of interfaces, including MIPI CSI-2, USB 3.1, and NVMe, making it ideal for mobile and industrial AI applications. Connect Tech NGX012
4.3" LCD IPS display with touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. Resolution 800x480 pixels. Waveshare 4.3inch HDMI LCD (B)
Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a viewing angle of 62° and a 30 cm extension cord. ArduCAM B0320
No product available!
Module with IMX298 sensor working with NVIDIA Jetson Nano. The sensor used has a 16 MP matrix and allows you to record video at resolutions of 16MP/30fps. Acrylic case included. ArduCAM B0214
A set with two IMX477 cameras with a resolution of 12 MP and an expansion module for Jetson Nano and Xavier NX, which allows you to simultaneously connect two cameras to the minicomputer. ArduCAM B0265N
No product available!
Kit for building an intelligent JetBot robot based on Jetson Nano. It consists of an expansion module, camera with Sony IMX219 image sensor, motors, housing and a set of mounting screws. Waveshare JetBot 2GB AI Kit Acce
Base board for NVIDIA Jetson AGX Xavier modules. Equipped with MIPI CSI-2, NVMe M.2 Key M, HDMI, USB 3.1, Ethernet (RJ-45), CAN Bus and power connector. Connect Tech AGX101
No product available!
Camera module with IMX219 sensor with a resolution of 8 MP equipped with programmable focus. Designed for NVIDIA Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0181
Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and Raspberry Pi Compute Module, RDK X3, VisionFive2, etc. It is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 200°. Waveshare IMX219-200 Camera
Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with a USB 3.0, USB 2.0 OTG, HDMI, GbE connector, as well as a micro SD card slot. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG003
No product available!
Camera module designed for NVIDIA Jetson Nano/Xavier NX. The camera is equipped with a Sony IMX477 sensor and focus controlled by the I2C interface. ArduCAM B0273
IPS 4" LCD display with touch screen. Equipped with HDMI interface for image display and USB type C and I2C for touch screen. Resolution 720x720 pixels. Waveshare 4inch HDMI LCD (C)
A base plate for NVIDIA Jetson TX1, Jetson TX2 or Jetson TX2i modules. Equipped with 5 Gigabit Ethernet ports, HDMI Video, USB 3.0, USB 2.0, USB OTG, Mini-PCIe / mSATA and two serial RS-232 ports. Connect Tech ASG007
No product available!
Starter Cable Kit for Rogue Carrier. Connect Tech CKG064
No product available!
5G/4G/3G and GNSS module with SIM8202G-M2 chip. It allows you to make phone calls, SMS support, cloud communication and has support for GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare SIM8202G-M2 5G for Jetson Nano (EU)
No product available!
Expansion module with an industrial interface RS485 and CAN dedicated to minicomputers NVIDIA Jetson Nano. Equipped with protection and electrical insulation. Waveshare RS485 CAN for Jetson Nano