- -zł20.42
New products
New products New products
Available
zł73.14
24h
Available
zł1,049.01
24h
Available
CT-SE - development board with ATmega328P microcontroller
ID: 578521
5906623405329
zł69.00
zł48.59
Save zł20.42
Tax included
zł39.50 tax excl.
Lowest price 30 days:
zł69.00
Development board with ATmega328P microcontroller equipped with 14 I/O lines, 6 PWM channels, 6 analog inputs and FT231X chip. Compatible with Arduino UNO Rev3. Cytron CT-SE
Description
CT-SE is an Arduino compatible board, based on the ATmega328P microcontroller from the AVR family. There are 14 I/O lines, 6 PWM channels, 6 analog inputs and communication interfaces (UART, SPI, I2C) at the user's disposal. The FT231X system realizes communication via the USB interface.
Compared to the original version of Arduino UNO Rev 3, the CT-UNO uses a micro USB connector, so the board can be powered, for example, from a Power Bank. In addition, an ATmega328P microcontroller in an SMD casing and a regulator of up to 1 A were used. The supply voltage range on the DC connector was also increased from 12 V to 15 V. The set was designed for learning programming and electronics.
Features
- ATmega328P microcontroller in SMD casing
- Flash memory: 32 KB
- SRAM memory: 2 KB
- EEPROM memory: 1 kB
- Clock speed: 16 MHz
- 14 digital I/O pins
- 6 PWM outputs
- 6 analog inputs
- UART, SPI, I2C interfaces
- 2 x external interrupts
- 6 pin ISP connector
- Compatible with Uno R3 Shield
- Indicator lights for power, TX, RX
- User LED D13
- FT231X chip realizing communication via USB
- Programmed in the Arduino IDE
- USB MicroB socket
- DC 7 to 15 V power connector
- Voltage regulator 500 mA 3.3 V
- Voltage regulator 1 A 5 V
578521
Data sheet
- Microcontroller
- ATmega328
- Core
- AVR
- Frequency
- 16MHz
- Flash memory
- 32kB
- RAM
- 2kB
- EEPROM memory
- 1kB
- Number of digital pins
- 14
- Number of PWM channels
- 6
- Ilość wejść analogowych
- 6
- ADC
- 1x 10bit
- DAC
- none
- CAN
- none
- USB
- 1
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- GSM/GPRS module
- No
- Logic voltage
- 5 V
- MicroSD slot
- No
- Supply voltage min
- 7
- Supply voltages max
- 15 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
zł3.21
24h
Available quantity: 23
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-W
zł4.06
24h
Available quantity: 10
Available
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.01
24h
Available quantity: 111
Available
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.19
24h
Available quantity: 226
Available
A set of 40 pcs of male-male connecting cables in various colors, 10 cm long
zł5.49
24h
Available quantity: 291
Available
Board compatible with Arduino, based on ATmega328P. Equipped with an area with prototype holes, a breadboard, 12 LEDs, a button and a buzzer. Cytron MAKER-UNO-X
zł65.50
24h
Available quantity: 2
Available
Other products in the same category (16)
A compact board similar to Seeeduino V4.2/Arduino UNO and fully compatible with Arduino Nano. It uses a USB Type C connector and a Grove I2C connector. Seeed Studio 102010268
zł55.82
4 weeks
No product available!
Module with ATmega328 microcontroller from the AVR family (32 kB Flash, 2 kB SRAM, 1 kB EEPROM). The module has 14 I/O lines, 6 PWM channels, 8 analog inputs
zł29.90
4 weeks
No product available!
Board compatible with Arduino, equipped with the ATmega32U4 microcontroller
zł31.70
24h
Available quantity: 10
Available
Development board with NXP iMX RT1011 processor with ARM Cortex M7 core equipped with AirLift WiFi module. It has Arduino UNO compatible connectors and a STEMMA QT connector for I2C devices. Adafruit 4950
zł186.87
4 weeks
No product available!
Microcontroller board based on Leaf Maple, STM32F103RB, USB, RoHS
Regular pricezł125.71zł89.85
24h
Available quantity: 1
Available
Microcontroller board based on the ATmega328
zł33.05
24h
Available quantity: 11
Available
Virtual keyboard module in the form of a small flash drive. It allows you to simulate the keyboard after uploading the appropriate software and pressing a combination of buttons on the computer.
zł111.04
24h
Available quantity: 2
Available
Board compatible with Arduino Nano. It is based on the ATmega328P microcontroller with 32 KB Flash, 2 KB SRAM and 1 KB EEPROM. It has 12 LEDs, a buzzer and a user button. Cytron Maker Nano
zł42.16
24h
Available quantity: 21
Available
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core. It has connectors and dimensions compatible with the Arduino Uno Rev3. HW-819
zł73.63
4 weeks
No product available!
Compact microcontroller board with an ATmega32U4 chip that integrates with USB to act as a HID device such as a keyboard or mouse. It operates at 5V at 16MHz, offering 20 digital I/O lines, of which 7 support PWM and 12 act as analog inputs.
zł53.85
24h
Available quantity: 34
Available
Board with Atmel ATmega328P microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface
zł27.59
24h
Available quantity: 1
Available
With Maker Uno RP2040, we bring the power of the RP2040 chip into the familiar Uno form factor. We maintain the user-friendly nature and plug-and-play features that have contributed to the popularity of the Arduino platform, while utilizing the advanced capabilities of the RP2040 to enhance its performance. Additionally, this board has been enriched with Maker series features that support the learning process and spark creativity. Cytron MAKER-UNO-RP2040
zł63.90
24h
Available quantity: 2
Available
Module with ATmega4808 microcontroller from AVR family (48 KB Flash, 6 KB SRAM, 256 B EEPROM). The module has 14 I / O lines, 6 PWM channels, 8 analog inputs.
zł47.64
4 weeks
No product available!
Development board based on the R7FA4M1AB3CFM microcontroller and compatible with Arduino UNO R4 Minima. Waveshare R7FA4 PLUS A
zł71.80
24h
Available quantity: 3
Available
Microcontroller board based on the ATmega32u4
zł37.56
4 weeks
No product available!
A miniature development board with ATtiny85 microcontroller, on which 6 I / O pins were derived. The module is supported by Arduino IDE. modATT85
zł14.58
24h
Available quantity: 1
Available
Development board with ATmega328P microcontroller equipped with 14 I/O lines, 6 PWM channels, 6 analog inputs and FT231X chip. Compatible with Arduino UNO Rev3. Cytron CT-SE