Best sellers
There are 16713 products.
Module with IPS LCD display, 1.3" diagonal and 240x240 px resolution. Communication via SPI interface. Waveshare 1.3inch LCD HAT
Conical replacement tip for SL98/ZD99 soldering stations, total length ~66 mm, precision working tip ~1 mm
Audio amplifier module with three output channels. It can be powered with the voltage from 12 to 18 V and has two outputs with a power of 10 W (left and right) and one with a power of 20 W (bass)
Set of 4 Panasonic Eneloop R6/AA rechargeable batteries with a capacity of 2000 mAh and voltage of 1.2V. Packaged in eco-friendly packaging (blister). Panasonic BK-3MCDE/4BE
Module with active low-pass filter. Dedicated to the bass column (subwoofer)
ENS160 gas sensor module to measure the concentration of carbon dioxide (eCO2) and volatile organic compounds (TVOC) in the air. It communicates via an I2C or SPI interface. SparkFun SEN-20844
Ultrasonic distance sensor module with a range of up to 720 cm. It communicates via UART, I2C or PWM interface. It is compatible with 3.3V or 5V devices. GY-US12V2
The board is equipped with ATSAME51 microcontroller (ARM Cortex-M core) with CAN bus and SPI Flash memory, GPIO pins and a connector for connecting the battery with the charging circuit. Adafruit 4759
Portable digital oscilloscope with built-in signal generator and multimeter. It has two measurement channels with 40 MHz bandwidth and a single-channel signal generator with waveform frequencies up to 25 MHz. Hantek 2D42
CM5-to-Pi5 adapter enables building a system based on the Compute Module 5 with functionality similar to the Raspberry Pi 5, while offering additional audio capabilities and flexibility of mounting and expansion, especially in embedded and industrial applications.
Module with real-time clock and CR1225 battery socket for voltage backup. It communicates via the I2C interface. Seeed Studio 103030277
Adapter designed for cameras with a parallel interface. It allows you to connect the camera with the USB Camera Shield module and connect it to a computer via a USB port. ArduCAM B0345
Unshielded UTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCU6-10CC-1000-O
Three-axis joystick with 5 kΩ resistance potentiometers that register the position of the X, Y and Z axes. It provides precise motion control in three dimensions, allowing the user to smoothly control connected devices. R300B-M2
Module with LED driver. It can control LED strips with a length of 1 to 2 meters at a voltage of 9 V or from 1 to 5 meters at a voltage of 12 V. Seeed Studio 105020002
Adapter Akyga AK-AD-41 enables the connection of devices with HDMI and DVI-D 24+1 outputs, offering digital video signal transmission without quality loss. Gold-plated contacts and a solid ABS housing ensure durability and stable connection. The adapter is used for integrating computers, TVs, projectors, and other multimedia devices in configurations requiring conversion between HDMI and DVI, both in home and professional applications.
LED bulbs with an E10 base, with a voltage of 3.8 V and a current of 0.3 A, enable the effect of changing RGB colors. The product is suitable for use in flashlights, light decorations, and hobby projects.
Module with analog output 0-20 mA or 4-20 mA. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP3076ADAM
Light ring with 24 single-color LEDs controlled by the I2C interface. The board can be powered with 5 V and consumes up to 5.5 mA per diode. Seeed Studio 104030013
Compact charger dedicated to 2S-3S LiPo and LiHv packs with built-in balancer. Powered directly from AC mains, no additional power supply required. ToolkitRC C3