Best sellers

Optical Time of Flight sensor with Pmod I2C connector. The built-in ISL29501 digital signal processor calculates the time it takes for the light emitted by ToF to reach the destination and back. The calculated time is proportional to the distance. Pmod ToF has a range of up to 5 m. Digilent 410-392

HDMI cable Akyga ver. 1.4 with a length of 5 m

Handheld 1-channel digital oscilloscope connected to a computer via USB interface. It offers a frequency bandwidth of 20 MHz and samples up to 96 MS/s. Hantek PSO2020

Digital microscope with USB interface. It is equipped with an image sensor with a resolution of 2 MPx and a magnification factor of up to 500 times. It can be connected to a Windows computer. Andonstar V160

Digital microscope with a 5" LCD display, a MicroSD slot and an HDMI output. It is equipped with an image sensor with a 3 MPx resolution and a magnification factor of up to 560 times. It can be connected to a TV via HDMI or a computer via USB. Andonstar ADSM302

Kit for tracks drive construction. It consists of silicone tracks and plastic gears and a set of screws. Pololu 3033

Temperature and humidity sensor SHT20 closed in a waterproof housing. Communication via the I2C interface. DFRobot SEN0227

Module with 16 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4156

A 15.6" QLED display with touch panel. It is equipped with a mini HDMI interface for video display and USB Type C for the touchscreen. It offers a resolution of 1920 x 1080 pixels. Waveshare 15.6inch QLED Monitor (EU)

Akyga AK-NB-08C is a one-meter cloverleaf power cable connecting the Schuko connector with the IEC C5 plug, suitable for powering laptops and monitors, made of durable, high-quality materials. Akyga AK-NB-08C

Tip GD-2 No. 049 mounted on the heater. Suitable for all types of Elwik soldering irons.

Module from the ESP32 series, combining a powerful microcontroller, Wi-Fi and Bluetooth 4.2 BLE. ESP-WROVER-B has a built-in PCB antenna, a large number of GPIO lines and small dimensions. Adafruit 3979

Module with 16 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4456

Color sensor equipped with the OPT4048 sensor from Texas Instruments. It allows you to determine the characteristics of ambient light by measuring parameters such as light intensity, color in the CIE XY, LUV coordinate systems, as well as color temperature. The module is equipped with Qwiic connectors. SparkFun SEN-22639

5" TFT LCD display with touch screen. It was equipped with DSI interface for image display and I2C interface for touch screen. Resolution 800x480 pixels. DFRobot DFR0550

Digital microscope with a 4.3" LCD display and a MicroSD slot. It is equipped with an image sensor with Full HD resolution and a magnification factor of up to 220 times. It can be connected to a computer with Windows. Andonstar AD102

Needle bending needle, for precise glue application, Flux 0,26mm internal diameter and 0,4636mm outside diameter. Set of 5 pcs

TS331ILT, Micropower low-voltage, rail-to-rail comparators, SOT-23-5

Development board with ESP32-C6 Mini-1 module from Espressif. It supports WiFi 6, Bluetooth® 5.3, Zigbee and Thread (802.15.4) protocol and offers various interface options including SPI, UART, LPUART, I2C, I2S, PWM LED controller, USB Serial/JTAG, ADC. Dedicated to IoT applications and battery-powered devices. SparkFun DEV-22925

Camera module with Sony IMX219 sensor works with all versions of Raspberry Pi. The camera is equipped with a matrix with a resolution of 8 MPx, the maximum video resolution is 1080p. ArduCAM B0102