Best sellers

A 20x15 mm knob with an internal diameter of 6 mm. For mounting on a potentiometer or rotary encoder

RGB LED strip controller with an infrared receiver. Enables remote control of multi-colored strips with diodes type 3528 and 5050 powered with voltage of 12 V using an IR remote control

The CAN-BUS Arduino Shield v2.0 can be stacked on an Arduino UNO, Arduino Leonardo or Arduino MEGA board. The shield integrates an MCP2515 CAN-BUS chip on the shield and has a CAN-BUS transceiver function. With an on-board DB9 and CAN-BUS connector you can choose a suitable port according to your host device. There is also an integrated MicroSD socket for data storage. DFR0370

A set of EC5 connectors (male plug and female socket with contacts) with a maximum forward current of 40 A. It works well as a battery connector or a power connector in RC models. Amass EC5

Module with ATmega32u4 microcontroller and 900 MHz wireless transceiver. The module can be used for transmission in the ISM 868 MHz band after the appropriate software configuration. The microcontroller is clocked at 8 MHz and works at 3.3 V. Adafruit 3076

Machine Screw: M3, 25mm Length, Phillips (25-pack)

Professional reference board with ARM Cortex-M4F microcontroller, designed for code tracing and real-time application analysis. Equipped with an external 19-pin debug port and test points for trace signals, it enables easy integration with J-Link and J-Trace programmers, supporting Embedded Trace Macrocell (ETM) technology. Segger Cortex-M Trace Reference Board (6.68.18)

Low-Voltage BLDC motor driver expansion board based on STL220N6F7 for STM32 Nucleo

64 Mbit Pseudo-SRAM with SPI/QPI interface, auto refresh, burst linear and wrap modes, and configurable I/O interface (1-/4-bit) in SOP-8 package. High performance and low power consumption ideal for data caching in embedded systems and IoT devices

Compact programmer/debugger from Digilent, designed for use with Xilinx FPGA and SoC devices, including Zynq. With a USB 2.0 interface (up to 30 Mbit/s), power supply from a micro-B port, and full compatibility with Vivado, ISE, iMPACT, and EDK software, it provides convenient and reliable project support. Its design allows easy connection to boards with a 2x7 (2 mm) JTAG socket and sharing the bus with other devices. Digilent 410-299

This add-on board enables a Raspberry Pi B+, Pi A+, Pi 2 or Pi 3 to drive a pair of brushed DC motors. Its dual MC33926 motor drivers operate from 5 V to 28 V and can deliver a continuous 3 A (5 A peak) per motor. The default pin mappings make it easy to get started using our provided software, but the board also exposes most of the driver chips’ I/O pins for more specialized applications. 

Designed for lighting plants in home and greenhouse conditions, the 5-meter LED strip uses the full spectrum of light, supporting photosynthesis and plant development at different growth stages. With 60 LEDs per meter, including 4 IR and 1 UV, and an IP65 protection class, the strip is water and dust resistant, making it suitable for use in humid environments, and a 12V DC power supply ensures its efficient operation.

5-meter LED strip for lighting plants supports the photosynthesis process thanks to the full spectrum of light and IR and UV diodes that support different stages of growth. With IP33 protection class, 12V DC power supply and self-adhesive backing, the strip is easy to install and suitable for less humid places.

Minicomputer with Rockchip RK3568B2 processor and 4 GB RAM. It is equipped with three Ethernet ports, two USB 3.0 ports, USB Type-C and a microSD slot. FriendlyELEC NanoPi R5S

LC filter connected to the output of the DC power supply with a voltage from 0 to 25 V and a maximum current of 2 A. It reduces voltage ripple and interference caused by the power supply

Lanberg patchcord provides fast, stable and reliable network connections thanks to high-quality materials and precise workmanship, and is compatible with a variety of network devices, making it ideal for any network configuration, from home offices to large corporate networks. Lanberg PCF6-10CC-3000-S

4-Bit Bus Switch, SOIC14, Fairchild Semiconductor, RoHS

Pin strip straight in blue, single-row, female, 1x10, pitch 2.54mm, THT, RoHS PB10S BLUE

Pin strip straight in green, single-row, female, 1x10, pitch 2.54mm, THT, RoHS. PB10S GREEN

GY-9255 is a 9 Degrees of Freedom (9DoF) module with the InvenSense MPU-9255 chip. It has a built-in gyroscope, accelerometer and magnetometer