Best sellers

5 MP camera with OV5640 sensor and 180° wide-angle lens. OV5640-A28

Tape, in the form of a braid, for removing excess molten solder binder when soldering and desoldering electronic components, 3mm wide and 1.5m long.

ArduCam CSI to HDMI modules are designed to work with cameras: Raspberry Pi V1 and Raspberry Camera V2. ArduCAM CSI to HDMI allows you to extend the signal from cameras using the HDMI <-> HDMI cable (up to 10 meters). Arducam B0091

The 2xRCA "J" 5m cable is a 5-meter-long stereo audio cable with two RCA plugs (red and white) on each end. It is used for transmitting analog audio signals between audio devices such as amplifiers, players, or televisions.

An H-bridge capable of controlling one DC motor in both directions or two unidirectional motors at voltages from 4.5 to 44 V and continuous current up to 1.1 A. The module offers three operating modes (PH/EN, IN/IN, half-bridge), built-in current limiting and measurement, and protection against overheating, overload, undervoltage, and reverse polarity. Its compact design, flexible logic power supply (1.8–5.5 V), and simple control make it ideal for robotics, automation, and hobby projects. Pololu 4972

A USB-to-I2C adapter that allows a computer to act as an I2C bus controller, supporting speeds over 1 MHz, clock stretching, and bidirectional communication. The device offers full galvanic isolation between USB and I2C, protecting the computer from damage and interference, and provides an isolated 3.3V or 5V voltage, eliminating the need for an external I2C power supply. With JST SH and goldpin connectors, USB-C support, a virtual serial port, and a Python library, the adapter is a versatile tool for working with I2C devices in both hobbyist and professional projects. Pololu 5397

This ideal diode module allows for safe connection of two power supplies to a common output point, preventing reverse current flow. Built-in 20mΩ resistors allow for simple voltage compensation and load balancing between the power supplies. The board offers flexible input and output connectors, facilitating integration into industrial and hobby systems requiring high power reliability. Pololu 5398

This SPST solid-state relay module allows for safe switching of DC circuits up to 60 V and 7 A, offering galvanic isolation and low conduction resistance (approx. 30 mΩ) thanks to the use of back-to-back MOSFET transistors. It features fast switching time (up to 1 ms), low control current consumption (approx. 10 mA), and the ability to control a signal from 2.7 to 40 V. Its compact design, lack of mechanical components, and the ability to mount on 2.54 mm connectors or screw terminals make the module a durable and quiet solution for systems requiring reliable isolation and long service life. Pololu 5420

The overlay allows for easier connection of wires to the Arduino UNO R3 board. Thanks to the screw connections, it is possible to fast and securely fix the cable, and the built-in female connectors allow the application of additional Arduino shields. Screw shield

This SPST solid-state relay module allows for safe switching of DC circuits up to 30 V and 11 A, offering galvanic isolation and low conduction resistance (approx. 30 mΩ) thanks to the use of back-to-back MOSFET transistors. It features fast switching time (up to 1 ms), low control current consumption (approx. 10 mA), and the ability to control a signal from 2.7 to 40 V. Its compact design, lack of mechanical components, and the ability to mount on 2.54 mm connectors or screw terminals make the module a durable and quiet solution for systems requiring reliable insulation and long service life. Pololu 5421

 relative humidity sensor with integrated temperature sensor for highly accurate measurements at low power. With the TI HDC1080, you can determine the relative humidity of the environment with up to 14 bits of resolution. Digilent 410-347

The Pmod SF3 provides users with 32 MB of non-volatile memory through the use of Micron\'s NOR Flash memory (N25Q256A). By using the SPI protocol, users can both write to and read from the flash memory. Digilent 410-340

7-segment LED display with four 0.56” high digits. In red. Q-5641ASK11

Set with HQ camera and 6 mm wide-angle lens. The set works with all versions of Raspberry Pi minicomputers with a CSI socket. ArduCAM B0240

RTC DS1307 module with clock dedicated to matrix displays with HUB75 interface. Designed for minicomputers Raspberry Pi. Adafruit 2345

A set of two Pololu wheels with dimensions 60x8mm in white. Intended for Micro servos with 4.8mm diameter spline and 20 teeth. Pololu 4914

Pin strip straight in black, single-row, female, 1x10, pitch 2.54mm, THT, RoHS. PB10S

A set of two Pololu wheels with dimensions 40x7mm in black. Intended for Micro servos with 4.8mm diameter spline and 20 teeth. Pololu 4905

This L298N module allows independent control of two DC motors or one stepper motor, ideal for robotics and DIY projects. It supports power supplies from 7V to 35V and has a built-in 5V regulator that can power additional circuits. Control is performed via the ENA, ENB, and IN1–IN4 pins, allowing for adjustable rotational direction and speed. The module is equipped with protection diodes and filter capacitors for stable and reliable operation.