SIM7600E LTE Cat-1 HAT - LTE Cat-1/3G/2G and GNSS communication module for Raspberry Pi
ID: 1182353
zł255.75
Tax included
zł207.93 tax excl.
GSM/GNSS expansion module dedicated to Raspberry Pi minicomputers. Allows to equip RPi with LTE Cat-1/3G/2G communication and positioning within GPS, BeiDou, Glonass, GALILEO, QZSS navigation systems. Waveshare SIM7600E LTE Cat-1 HAT
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The SIM7600E LTE Cat-1 HAT is a module that extends the capabilities of the Raspberry Pi to communicate over GSM/GPRS cellular networks. It uses Simcom's SIM7600E chip, and with it it is possible to make and receive calls (it is possible to attach a microphone and headphones via a jack socket), send and receive SMS messages, and use wireless Internet. It also has built-in support for positioning within GPS, BeiDou, Glonass, GALILEO, QZSS navigation systems. The module is controlled by AT commands via the UART of the Raspberry Pi computer. It has rich support in the form of libraries for Raspberry Pi, Arduino, STM32.
| 1. SIM7600E | 13.USB-UART |
| 2. CP2102 | 14. MAIN antenna connector |
| 3. Audio decoder NAU8810 | 15. AUX antenna connector |
| 4. Voltage translator 3,3V/5V | 16. GNSS antenna connector |
| 5. MP2128DT | 17. Power switch |
| 6. SPX29302 | 18. GSM indicator |
| 7. GPIO | 19. Power indicator |
| 8. SIM control interface | 20. Voltage jumper |
| 9. SIM socket | 21. UART jumper |
| 10. MicroSD socket | 22. Power jumper |
| 11. Jack 3,5mm | 23. USB pads |
| 12. USB | 24. BOOT |
Features
- Based on the chip: SIM7600E
- Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.
- Supports GNSS positioning (GPS, GLONASS, BeiDou, QZSS).
- Built-in USB interface for testing AT commands, obtaining GPS positioning data
- Connector with derived UART interface to connect to hosts such as Arduino/STM32
- Internal voltage translator, defaults to 3.3V, allows switching to 5V using a 0Ω resistor
- SIM card slot
- 2x LED indicators
- Transmission speed: 300bps ~ 4Mbps
- Control via AT commands (3GPP TS 27.007, 27.005 and SIMCOM extended AT commands)
- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
- 3.5mm jack connector for headset connection
- Frequency band:
- LTE Cat-1: LTE-TDD: B38 / B40 / B41, LTE-FDD: B1 / B3 / B5 / B7 / B8 / B20
- 3G: UMTS / HSPA +: B1 / B5 / B8
- 2G: GSM / GPRS / EDGE: 900 / 1800 MHz
- 16-channels
- Sensitivity: -159 dBm (GPS) / -158 dBm (GLONASS) / -159dBm (BeiDou)
- Cold start: 35 s
- Hot start: 1 s
- SMS: MT, MO, CB, Text, PDU
- Power supply: 5V
- Operating voltage: 5V/3.3V (default is 3.3V)
- Operating temperature: -30~80 ° C
- Dimensions: 56.21 x 65.15 mm
Kit contains
- SIM7600E LTE Cat-1 HAT
- LTE antenna
- External GPS antenna (B)
- 2 x microUSB - USB cable
- Set of mounting spacers (2 pieces)
1182353
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł184.00
24h
Available quantity: 92
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
Regular pricezł239.00zł217.00
24h
Available quantity: 201
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł287.00
24h
Available quantity: 108
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
Regular pricezł419.00zł389.00
24h
Available quantity: 169
Available
Other products in the same category (16)
3-port HUB module with USB 2.0 interface and RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Waveshare PoE/ETH/USB HUB HAT
zł99.36
24h
Available quantity: 10
Available
4 Port USB HUB HAT for Raspberry Pi B+, Raspberry Pi 2 B, Rapsberry Pi 3 B; USB to UART Onboard. Waveshare USB HUB HAT
zł35.89
24h
Available quantity: 15
Available
Radio module with the RFM69HCW (868 MHz or 915 MHz) system, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4072
zł116.47
24h
Available quantity: 2
Available
A two-channel RS485 expansion module designed for the Raspberry Pi. It uses the TP75176E transceiver and CH432T chip and offers a stable connection between devices. DFRobot DFR0824
zł145.02
24h
Available quantity: 2
Available
Board with the NB-IoT SIM7020E module for the Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7020E-NB-IoT HAT
zł103.30
4 weeks
No product available!
SIMCom 4G SIM7600G-H module kit designed to work with Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H 4G HAT (B)
zł348.52
6 weeks
No product available!
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
zł120.87
24h
Available quantity: 6
Available
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare SX1262 868/915M LoRaWAN HAT
zł74.01
24h
Available quantity: 4
Available
Board with the NB-IoT SIM7028 module intended for Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7028-NB-IoT HAT (EN)
zł84.67
24h
Available quantity: 4
Available
HAT module designed for Raspberry Pi minicomputer. Powala adds two RS485 interfaces and one CAN bus to the project. Waveshare RS485 CAN HAT (B)
zł104.85
6 weeks
No product available!
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B) (with case)
zł1,610.71
6 weeks
No product available!
Set with SIMCom 5G SIM8262E-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8262E-M2 5G HAT (with case)
zł1,383.63
6 weeks
No product available!
The set with the RM500Q-GL module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM500Q-GL 5G HAT (with case) (EU)
zł1,861.14
4 weeks
No product available!
HAT module designed for Raspberry Pi minicomputer. Powala adds two CAN interfaces to the project. Waveshare 2-CH CAN HAT
zł95.08
24h
Available quantity: 1
Available
3-port HUB module with USB 2.0 interface with RJ45 connector with PoE function. Designed for Raspberry Pi Zero. Case included. Waveshare PoE-ETH-USB-HUB-BOX
zł123.90
24h
Available quantity: 4
Available
A 3-port HUB module with a USB 3.2 Gen1 interface with an RJ45 connector designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB Gigabit ETH HAT
zł117.31
24h
Available quantity: 6
Available
GSM/GNSS expansion module dedicated to Raspberry Pi minicomputers. Allows to equip RPi with LTE Cat-1/3G/2G communication and positioning within GPS, BeiDou, Glonass, GALILEO, QZSS navigation systems. Waveshare SIM7600E LTE Cat-1 HAT