SIM7080G Cat-M/NB-IoT HAT module with GNSS for Raspberry Pi - Waveshare 17693
ID: 1182297
5902186301887
zł120.11
Tax included
zł97.65 tax excl.
The module from SIM7080G is designed for NB-IoT and Cat-M communications. It also enables the use of GNSS systems for positioning. Waveshare SIM7080G Cat-M/NB-IoT HAT (EN)
Description
This module from SIM7080G is designed to work with Raspberry Pi. It enables the use of NB-IoT and Cat-M communications, as well as positioning using GNSS systems such as GPS, GLONASS, BeiDou and Galileo. It can be controlled by AT commands and supports communication protocols such as HTTP, MQTT, LWM2M, COAP, etc. Due to its low latency, low power consumption and long range, it is an ideal choice for IoT applications like smart instruments, asset tracking and remote monitoring.
The module has an integrated voltage level converter chip, three LEDs to indicate operation, and a nano SIM card slot. It is compatible with 3.3 V and 5 V systems. Full documentation with examples is available on the product wiki page.
Features
- Frequency band:
- NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85
- Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85
- GNSS: GPS, GLONASS, BeiDou, Galileo
- Data rate:
- NB-IoT (Kbps): 136(DL)/150(UL)
- Cat-M (Kbps): 589(DL)/1119(UL)
- Protocols: TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
- Power supply: USB connector
- SIM card: nano SIM NB-IoT/Cat-M (1.8V)
- GNSS and LTE antenna u.FL connector
- Network and charging LED indicator
- Operating voltage: 3.3V, 5V
- Power supply voltage: 5 V
- Current consumption: 39 mA (operation), 10 mA (idle), 1.2 mA (sleep mode), 3.2 uA (PSM)
- Dimensions: 65 x 30.2 mm
Kit contains
- SIM7080G Cat-M/NB-IoT HAT module
- LTE antenna
- GNSS antenna
- 2x20-pin female connector
- USB type A to MicroUSB cable
- Screw set
1182297
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł220.90
Delivery date unknown
No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.8 GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł276.75
Delivery date unknown
No product available!
Other products in the same category (16)
Versatile CAN bus interface based on the MCP2518FD controller, enabling communication in CAN 2.0 and CAN FD modes via SPI interface, compatible with SBC computers, including Raspberry Pi 5, with additional security and the ability to support two modules simultaneously
zł69.77
24h
Available quantity: 111
Available
The 4-port HUB module with USB 3.2 interface is designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB HAT
zł62.03
24h
Available quantity: 1
Available
Radio module with RFM69HCW 433 MHz chip, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4073
zł144.14
24h
Available quantity: 2
Available
SIMCom 4G SIM7600G-H module kit designed to work with Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H 4G HAT (B)
zł348.52
4 weeks
No product available!
The 2-CH CAN HAT+ expansion board adds two isolated CAN channels to the Raspberry Pi, with support for further expansion. Featuring the HAT+ standard, galvanic isolation, and surge protection, it is well-suited for industrial, automotive, and automation applications where reliable and safe serial communication is essential.
zł102.25
4 weeks
No product available!
3-port HUB module with USB 2.0 interface and RJ45 connector. Designed for Raspberry Pi Zero. Housing included. Waveshare ETH-USB-HUB-BOX
zł57.49
24h
Available quantity: 15
Available
4 Port USB HUB HAT for Raspberry Pi B+, Raspberry Pi 2 B, Rapsberry Pi 3 B; USB to UART Onboard. Waveshare USB HUB HAT
zł35.36
4 weeks
No product available!
The set with the RM500U-CNV module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks. Waveshare RM500U-CN 5G HAT
zł938.97
4 weeks
No product available!
SIM7000E NB-IoT HAT is a module that extends the capabilities of Raspberry Pi for communication via GSM / GPRS cellular networks based on Simcom Sim7000E. It has support for NB-IoT, eMTC, EDGE, GPRS and GNSS. Waveshare SIM7000E NB-IoT HAT
zł163.28
24h
Available quantity: 11
Available
The EM060K-GL LTE Cat-6 module kit is designed for use with the Raspberry Pi minicomputer. It supports communication over the high-speed LTE-A network and GNSS positioning. Waveshare EM060K-GL LTE Cat-6 HAT
zł473.19
4 weeks
No product available!
Expansion board with LoRaWAN SX1303 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1303 868M LoRaWAN Gateway HAT
zł479.63
4 weeks
No product available!
Expansion Shield X300 with RTC real time clock; audio input and output; USB hub; Bluletooth, WIFI; SATA interface. Compatible with Raspberry Pi Model B+, Pi 2 Model B and Pi 3 Model B
Regular pricezł269.83zł176.19
24h
Available quantity: 3
Available
Board with the NB-IoT SIM7020E module for the Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7020E-NB-IoT HAT
zł82.80
24h
Available quantity: 3
Available
NVMe Base is a reliable solution for expanding storage for the Raspberry Pi 5, ideal for users who require fast data access and large storage capacity. With support for multiple NVMe SSD models and compatibility with the Raspberry Pi 5, it is the perfect addition to projects that demand performance and flexibility. Pimoroni PIM699
zł67.90
4 weeks
No product available!
PCIe To M.2 E KEY HAT+ adapter expands the capabilities of the Raspberry Pi 5 with support for high-speed Wi-Fi/Bluetooth network cards in M.2 E Key format. It supports direct PCIe connection and Bluetooth integration via USB. Robust antenna connectors and compliance with the HAT+ standard make it an ideal solution for IoT projects, network gateways, and compact routers based on the Raspberry Pi 5.
zł36.97
24h
Available quantity: 3
Available
PCIe TO 2-CH PCIe HAT is a versatile PCIe expansion board for Raspberry Pi 5, enabling simultaneous connection of two PCIe HAT modules. With support for stacked mounting and the PCIe Gen2 standard, it is an ideal solution for testing, expansion, and prototyping devices using Raspberry Pi 5 and high-bandwidth interfaces.
zł62.24
24h
Available quantity: 7
Available
The module from SIM7080G is designed for NB-IoT and Cat-M communications. It also enables the use of GNSS systems for positioning. Waveshare SIM7080G Cat-M/NB-IoT HAT (EN)