SX1262 433/470M LoRaWAN/GNSS HAT - expansion board with LoRa and GNSS module for Raspberry Pi
ID: 1185452
5906623465903
€25.90
Tax included
€21.05 tax excl.
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT
Description
An expansion board with LoRa Node SX1262 and GNSS L76K module designed for Raspberry Pi minicomputers. The SX1262 chip supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. The L76K module can receive data from the main positioning systems: GPS, GLONASS, Beidou (BDS) and QZSS. It features fast operation, high accuracy and low power consumption. Also located on the bottom of the board is an ML1220 battery back-up socket, which significantly speeds up the device's start-up after a temporary power failure. The user has the option to connect an external LoRa and GNSS antenna via the IPEX connector. The module is connected to the Raspberry Pi via a dedicated 40-pin GPIO connector. It will find use in industrial applications, measurement data acquisition and smart home projects. Full documentation is available on the product wiki page.
| 1. LoRa SX1262 Module | 6. IPEX GNSS connector |
| 2. GNSS L76K Module | 7. IPEX LoRa connector |
| 3. LDO 3,3 V | 8. LED Indicators |
| 4. GPS Standby mode on/off | 9. GPIO 40-pin header |
| 5. SET button | 10. Communication header |
Features
- SX1262 chip
- Frequency band: HF 410 to 510 MHz
- Modulation: LoRa/(G)FSK
- LoRa communication speed: 0.018 to 62.5Kbps, (G)FSK: 0.6 to 300Kbps
- Transmission power: 22dBm@3.3V
- Spreading factor: SF7 ~ SF12
- Communication bus: SPI
- GPIO 40-pin connector
- Supply voltage: 3.3V
- Current consumption when transmitting: 107mA@22dBm
- Current consumption when receiving: 5.3mA@125KHz
- Operating temperature: 0 to 50℃
- L76K chip:
- GNSS systems support: GPS, GLONASS, BDS, QZSS
- L1 band: 32 tracking channels/72 receive channels
- A-GNSS support
- Receive sensitivity: -148dBm, -160dBm, -162dBm (acquisition, re-acquisition, tracking)
- Time to first position fix: 30 s (cold start), 5.5 s (with AGNSS)
- Positioning accuracy: 2 m
- UART speed range: 4800 to 115200bps (default 9600bps)
- Measurement frequency: up to 5 Hz (default 1 Hz)
- Battery socket ML1220
- Dimensions: 65 x 30.5 mm
Kit contains
- SX1262 433/470M LoRaWAN HAT module
- 433/470 MHz CB Antenna
- GNSS ANtenna
- 2 x IPEX to SMA adapter
- Set of screws
- Female connector 2x20-pin
1185452
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
€42.42 24hAvailable quantity: 146 AvailableThe latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
€53.26 Delivery date unknown No product available!
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
€66.76 24hAvailable quantity: 166 Available
Other products in the same category (16)
Module with an RFID reader designed to work with the Raspberry Pi. Equipped with an OLED display and a buzzer. SB Components 20003
€32.03 Delivery date unknown No product available!
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare SX1262 868/915M LoRaWAN HAT
€17.95 24hAvailable quantity: 1 AvailableBoard with the NB-IoT SIM7020E module for the Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7020E-NB-IoT HAT
€24.89 4 weeks No product available!
Modern SSDs are most commonly equipped with a high-speed NVMe interface, implemented through an NGFF connector with an M-key, known as M.2 M-key. The KAmod USB-PCIE-M2 adapter allows you to connect an M.2 M-key SSD to a computer via a USB port.
€18.84 24hAvailable quantity: 148 AvailableRadio module with the RFM69HCW (868 MHz or 915 MHz) system, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4072
€26.67 24hAvailable quantity: 1 AvailableGSM/GNSS expansion module dedicated to Raspberry Pi minicomputers. Allows to equip RPi with LTE Cat-1/3G/2G communication and positioning within GPS, BeiDou, Glonass, GALILEO, QZSS navigation systems. Waveshare SIM7600E LTE Cat-1 HAT
€61.64 4 weeks No product available!
Set with SIMCom 5G SIM8262E-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8262E-M2 5G HAT
€290.68 4 weeks No product available!
The PCIe To USB 3.2 Gen1 HAT for Raspberry Pi 5 is a versatile solution that expands the USB capabilities of your Raspberry Pi 5. With easy installation and power monitoring features, it is an ideal choice for projects requiring multiple high-speed USB ports. Additionally, the reserved space for a cooling fan ensures better cooling and stable operation of the device. Waveshare 26847
€19.85 24hAvailable quantity: 2 AvailableThe module from SIM7080G is designed for NB-IoT and Cat-M communications. It also enables the use of GNSS systems for positioning. Waveshare SIM7080G Cat-M/NB-IoT HAT (EN)
€28.95 4 weeks No product available!
SIM7600E-H 4G HAT is an expansion module for Raspberry Pi for communication via GSM / GPRS cellular networks based on Simcom SIM7600E-H chipset. Waveshare SIM7600E 4G HAT
Regular price€83.24€70.90 24hAvailable quantity: 26 AvailableSet with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)
€403.09 4 weeks No product available!
Kit with the LTE Cat-6 EM06-E module designed to work with the Raspberry Pi minicomputer. It supports communication within the fast LTE-A network and GNSS positioning.Waveshare RM500U-CN 5G HAT (EU)
€154.28 24hAvailable quantity: 1 AvailableNVMe Base is a reliable solution for expanding storage for the Raspberry Pi 5, ideal for users who require fast data access and large storage capacity. With support for multiple NVMe SSD models and compatibility with the Raspberry Pi 5, it is the perfect addition to projects that demand performance and flexibility. Pimoroni PIM699
€16.36 Delivery date unknown No product available!
4-port HUB module with USB 2.0 interface. Designed for Raspberry Pi Zero. Case included. Waveshare USB-HUB-BOX
€11.59 24hAvailable quantity: 5 AvailableKAmod RPi5 M.2 mini allows you to connect NVMe M.2 drives, which allows you to use it as a multimedia center or file server, while maintaining a small size and low power consumption
€8.65 24hAvailable quantity: 187 AvailableModule with RS232 and RS485 interface dedicated to Raspberry Pi minicomputer. Communication takes place via the SPI interface. Waveshare RS485 RS232 HAT
€20.45 24hAvailable quantity: 6 Available
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 433/470M LoRaWAN/GNSS HAT