New products
New products
SIM8202G-M2 5G HAT (B) - kit with 5G module SIM8202G-M2 for Raspberry Pi
ID: 1178850
zł1,672.58
Tax included
zł1,359.82 tax excl.
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It is based on the Qualcomm Snapdragon X55 chip, which guarantees multi-range frequency support, so that the device can be used in countries and regions such as China, Japan, South Korea, Europe or the Middle East. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. SIM8202G-M2 supports positioning within GPS, GLONASS, Beidou, Galileo and QZSS systems, Dial-up function and communication with devices in the cloud. It is supported by AT commands.
The base board is equipped with an M2 B Key connector, thanks to which it enables connection with various 4G or 5G communication modules with an M2 connector. The board also has a USB 3.1 port, an audio jack, a decoder and a SIM card slot. The set is connected to the Raspberry Pi using a standard 40-pin connector. The set includes a housing, antennas and a cooling fan. Full documentation is available on the product Wiki page.
Features
- SIMCom 5G SIM8202G-M2 modem with Qualcomm SDX55 chip
- Frequency band:
- 5G SA Sub-6G n1, n2, n3, n5, n7, n8, n12, n20, n28, n38, n40, n41, n48, n66, n71, n77, n78, n79
- Sub-6G (NSA) n41, n77, n78, n79
- LTE-FDD B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71
- LTE-TDD B34, B38, B39, B40, B41, B42, B43, B48
- WCDMA B1, B2, B3, B4, B5, B8
- GNSS GPS, GLONASS, Beidou, Galileo and QZSS
- Data transfer rate:
- Sub-6G 4 Gb / s (Download) and 500 Mb / s (Upload)
- LTE 2 Gb / s (download) and 200 Mb / s (upload)
- HSPA 42 Mb / s (download) and 5.76 Mb / s (upload)
- Windows, Linux, Android operating systems
- Communication protocols TCP / IP / IPV4 / IPV6 / Multi-PDP / FTP / FTPS / HTTP / HTTPS / MQTTS / DNS / SSL3.0
- SMS supports MT, MO, CB, Text, PDU
- Firmware Upgrade Supports firmware upgrade via USB port
- 2 x 1.8V / 3.0V SIM slot
- 4 x SMA antenna connector
- On / off switch, LED indicator, reset
- Power supply 5V, 3A
- Module dimensions 85 x 56 mm
Kit contains
- SIM8202G-M2
- M.2 TO 4G/5G HAT
- 4 x External Antenna
- 4 x IPEX Adapter
- USB cable
- USB3.0 adapter
- USB2.0 adapter
- GPS antenna
- 2x20-pin terminal block
- Screw package
- SMA protective caps
1178850
Data sheet
- Compatible with
- Raspberry Pi 5/4/3/2/1 A/B, Zero/Zero 2 H/WH
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł172.90
24h
Available quantity: 102
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.5GHz, 2GB RAM LPDDR4, Broadcom VideoCore VI.
zł215.00
24h
Available quantity: 238
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł265.90
24h
Available quantity: 2
Available
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 8 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł362.90
24h
Available quantity: 92
Available
Other products in the same category (16)
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1268 433M LoRa HAT
zł95.96
4 weeks
No product available!
Expansion board with GSM/GPRS module designed for Arduino and Raspberry Pi. It uses the Quectel M95 chip, the board has two audio connectors, a microSD slot and a dual SIM slot. A-GSM II Shield
zł204.67
6 weeks
No product available!
Expansion board with LoRa E22-900T22S module for Raspberry Pi. Allows communication in the 868 MHz frequency band. Waveshare SX1262 868M LoRa HAT
zł143.79
24h
Available quantity: 3
Available
The 4-port HUB module with USB 3.2 interface is designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB HAT
zł68.97
24h
Available quantity: 6
Available
Versatile CAN bus interface based on the MCP2518FD controller, enabling communication in CAN 2.0 and CAN FD modes via SPI interface, compatible with SBC computers, including Raspberry Pi 5, with additional security and the ability to support two modules simultaneously
zł69.77
24h
Available quantity: 162
Available
The set with the RM502Q-AE module is designed to work with the Raspberry Pi minicomputer. It supports 5G, 4G and 3G networks and supports GNSS positioning. Waveshare RM502Q-AE 5G HAT (EU)
zł2,086.85
4 weeks
No product available!
Expansion board with LoRaWAN SX1302 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1302 868M LoRaWAN Gateway HAT
zł544.07
24h
Available quantity: 4
Available
Radio module with the RFM69HCW (868 MHz or 915 MHz) system, designed to work with the Raspberry Pi. Equipped with an OLED display and buttons. Adafruit 4072
zł110.65
24h
Available quantity: 2
Available
A NFC-compatible Raspberry Pi expansion kit with integrated antent. It has the ability to work in reader mode, P2P
and card emulation mode. NXP PN7150
Regular pricezł149.00zł129.00
24h
Available quantity: 7
Available
BTT U2C V2.1 is a versatile CAN Bus adapter, ideal for integration with Raspberry Pi. With ESD protection, a durable PCB surface, and support for firmware updates, it is a reliable solution for stable communication in 3D printing projects. BIGTREETECH U2C V2.1
zł62.55
24h
Available quantity: 16
Available
HAT with 2-channel CAN converter designed for Raspberry Pi minicomputers. The communication was based on the CAN controller MCP2518FD as well as the MCP2562FD transceiver and SPI interface. Waveshare 2-CH CAN FD HAT
zł209.40
24h
Available quantity: 8
Available
Expansion Shield X300 with RTC real time clock; audio input and output; USB hub; Bluletooth, WIFI; SATA interface. Compatible with Raspberry Pi Model B+, Pi 2 Model B and Pi 3 Model B
zł269.83
24h
Available quantity: 3
Available
Adapter in the form of a HAT+ cover for Raspberry Pi 5 enabling the connection of drives, AI accelerators and other modules in the M.2 standard with an M key. The board supports drives in the 2230 and 2242 format and provides transfer speeds of up to 500 MB/s. Raspberry Pi SC1166
zł58.90
24h
Available quantity: 247
Available
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare SX1262 868/915M LoRaWAN HAT
zł71.59
24h
Available quantity: 3
Available
The KAmodRPi UART RS485 ISO is an advanced RS485 bus transceiver for the Raspberry Pi, featuring automatic transmission direction control, galvanic isolation, surge protection, and support for up to 128 modules at a transmission speed of up to 500 kbps, powered by 5V with low power consumption
zł67.70
24h
Available quantity: 178
Available
Set with the SIMCom 4G module SIM7600G-H designed to work with the Raspberry Pi minicomputer. It supports 4G, 3G, 2G networks and GNSS positioning. Waveshare SIM7600G-H-M2 4G HAT
zł399.57
24h
Available quantity: 3
Available
Set with SIMCom 5G SIM8202G-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backwards compatible with 4G and 3G networks. Waveshare SIM8202G-M2 5G HAT (B)