PoE M.2 HAT+ (B) PCIe to M.2 NVMe with PoE for Raspberry Pi 5 - Waveshare 29320
ID: 1197486
5902186307391
zł91.39
Tax included
zł74.30 tax excl.
PoE M.2 HAT+ (B) is a practical add-on board for Raspberry Pi 5 that enables simultaneous power over Ethernet and installation of a high-performance NVMe SSD. With boot support from the SSD and additional power output terminals, this module is ideal for projects requiring fast storage and reliable power supply, such as servers, surveillance systems, or IoT gateways.
Description
The PCIe M.2 HAT+ (B) expansion enables connection of an NVMe SSD to the Raspberry Pi 5 while simultaneously powering the device via PoE (Power over Ethernet) compliant with IEEE 802.3af/at. The adapter uses the 16-pin PCIe connector on the Raspberry Pi 5 and a standard 40-pin GPIO header, allowing parallel use of other HAT add-ons. It supports both Gen2 and Gen3 protocols, allows system boot from the SSD, and is compatible with 2230, 2242, 2260, and 2280 SSD formats. Power over Ethernet enables data and power transmission through a single cable, simplifying network integration. The board also features LED indicators for monitoring status and additional 5 V and 12 V power outputs for external peripherals.
Features
- Supports NVMe-compatible M.2 SSDs (2230 / 2242 / 2260 / 2280 formats)
- IEEE 802.3af/at PoE standard support
- PoE input voltage: 37 V – 57 V DC
- Power output: 5 V 4.5 A (GPIO), 12 V 2 A (2-pin header)
- PCIe Gen2 / Gen3 support, boot from SSD possible
- 16-pin PCIe connector for Raspberry Pi 5
- Power output terminals for external devices (5 V and 12 V)
- Dual LED indicators showing operating status
- High-quality gold immersion finish
- Dimensions: 56.0 × 85.0 mm
Included
- PoE M.2 HAT+ (B)
- 16-pin PCIe cable
- SSD mounting screw
- Set of mounting screws
1197486
Data sheet
- Compatible with
- Raspberry Pi 5
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
The KAmodRPi UART RS485 ISO is an advanced RS485 bus transceiver for the Raspberry Pi, featuring automatic transmission direction control, galvanic isolation, surge protection, and support for up to 128 modules at a transmission speed of up to 500 kbps, powered by 5V with low power consumption
zł67.70
24h
Available quantity: 156
Available
KAmodRPI RS485 CAN HAT is a shield for the Raspberry Pi computer that extends its interfaces with RS485 and CAN. Bus signals are led out to goldpin connectors and terminal blocks.
zł39.90
24h
Available quantity: 92
Available
The PCIe To USB 3.2 Gen1 HAT for Raspberry Pi 5 is a versatile solution that expands the USB capabilities of your Raspberry Pi 5. With easy installation and power monitoring features, it is an ideal choice for projects requiring multiple high-speed USB ports. Additionally, the reserved space for a cooling fan ensures better cooling and stable operation of the device. Waveshare 26847
zł82.36
24h
Available quantity: 1
Available
Board with the NB-IoT SIM7028 module intended for Raspberry Pi. It communicates via the UART interface and AT commands. Waveshare SIM7028-NB-IoT HAT (EN)
zł85.47
24h
Available quantity: 4
Available
PCIe to Ethernet Adapter for Raspberry Pi 5. Extends the functionality of the Raspberry Pi 5 by adding a Gigabit Ethernet port with the high-performance RTL8111H controller. The adapter connects to the Raspberry Pi 5 using a 16-pin PCIe cable. Waveshare PCIe TO Gigabit ETH Board (C)
zł29.50
24h
Available quantity: 10
Available
HAT module designed for the Raspberry Pi minicomputer. It allows you to add an RS485 interface and a CAN bus to the project, allowing for wired communication of many devices over long distances. SB Components 21444
zł102.90
24h
Available quantity: 1
Available
NVMe Base is a reliable solution for expanding storage for the Raspberry Pi 5, ideal for users who require fast data access and large storage capacity. With support for multiple NVMe SSD models and compatibility with the Raspberry Pi 5, it is the perfect addition to projects that demand performance and flexibility. Pimoroni PIM699
zł67.90
4 weeks
No product available!
PoE HAT (G) allows Raspberry Pi 5 to be powered without the need for an additional power cable, using only an Ethernet cable compatible with Power over Ethernet technology. With high output power and a compact design, the HAT is ideal for projects requiring stability, space efficiency, and clean integration—especially when used with the official Raspberry Pi 5 case.
zł64.94
24h
Available quantity: 4
Available
The 4-port HUB module with USB 3.2 interface is designed to work with the Raspberry Pi minicomputer. Waveshare USB 3.2 Gen1 HUB HAT
zł62.03
24h
Available quantity: 1
Available
4G/3G/2G communication module and GNSS positioning. It allows making phone calls, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP support and GPS, BeiDou, Glonass, LBS support. Waveshare SIM7600G-H 4G HAT
zł324.42
4 weeks
No product available!
The PCIe TO 2-CH M.2 HAT+ expands the functionality of the Raspberry Pi 5 by enabling the installation of two NVMe SSDs, offering significantly improved read/write performance and the option to boot from disk. With its compact design, support for 2230/2242 form factors, and built-in power monitoring, the adapter is well-suited for server solutions, NAS projects, multimedia systems, and advanced industrial applications.
zł74.10
24h
Available quantity: 1
Available
Set with SIMCom 5G SIM8262E-M2 module designed to work with the Raspberry Pi minicomputer. It supports 5G SA or NSA networks and is backward compatible with 4G and 3G networks. Waveshare SIM8262E-M2 5G HAT (with case)
zł1,227.17
24h
Available quantity: 2
Available
SIM7000E NB-IoT HAT is a module that extends the capabilities of Raspberry Pi for communication via GSM / GPRS cellular networks based on Simcom Sim7000E. It has support for NB-IoT, eMTC, EDGE, GPRS and GNSS. Waveshare SIM7000E NB-IoT HAT
zł163.28
24h
Available quantity: 11
Available
Expansion board with LoRa E22-900T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. SB Components 22571
zł153.57
4 weeks
No product available!
Versatile CAN bus interface based on the MCP2518FD controller, enabling communication in CAN 2.0 and CAN FD modes via SPI interface, compatible with SBC computers, including Raspberry Pi 5, with additional security and the ability to support two modules simultaneously
zł69.77
24h
Available quantity: 111
Available
Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. SB Components 22564
zł167.69
24h
Available quantity: 2
Available
PoE M.2 HAT+ (B) is a practical add-on board for Raspberry Pi 5 that enables simultaneous power over Ethernet and installation of a high-performance NVMe SSD. With boot support from the SSD and additional power output terminals, this module is ideal for projects requiring fast storage and reliable power supply, such as servers, surveillance systems, or IoT gateways.