USB-UART converter PL2303 (Type A) V2 - Waveshare 20265

The KAmod USB HID module with the CH9350 chip enables reliable extension of USB HID signals via UART transmission, offering stable connections over long distances. With built-in protection features, advanced LED indicators, and full system compatibility, the device is ideal for industrial applications, embedded systems, and advanced control setups using standard HID devices.

The FT232RNL USB to UART converter provides stable serial communication and debugging of industrial equipment, supporting 3.3V and 5V voltages and hardware flow control. With power indicators, protection diodes, and compatibility with multiple operating systems, it offers reliable data transfers from 300 bps to 3 Mbps, as well as additional protections against faults and electrostatic discharge. Waveshare USB TO TTL (C)

The module with the converter USB-UART CP2104 dedicated for minicomputers Raspberry Pi. Adafruit 3589

The module with the UART-RS232 converter is designed to work with the Raspberry Pi Pico. It has a built-in SP3232EEN chip and enables data transmission between the UART interface and the RS232 device. Waveshare Pico-2CH-RS232

BOB-12731

Converter that provides easy communication between the RS232 and RJ45 Ethernet interface. Configurable via web page or AT commands. USR-DR301

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets. Adafruit 954

USB-UART converter based on the CH340N chip. It uses a USB type C connector and ensures stable and secure communication between the computer and devices using the UART interface

USB - UART converter based on the PL2303GS chip. Compatible with 1.8 V, 2.5 V, 3.3 V and 5 V, it is equipped with a micro USB connector. Waveshare PL2303 USB UART Board (micro) V2

USB - UART converter based on the PL2303TA chip. Compatible with voltages of 3.3 V and 5 V, it has been equipped with a miniUSB connector. Waveshare PL2303 USB UART Board (mini) V2

USB - RS-232 USB A (m) / D-Sub (m) cable with a length of 1 m. Akyga AK-CO-02

USB - UART converter based on the FT232RNL chip. Compatible with voltages of 3.3 V and 5 V, it has been equipped with a miniUSB connector. Waveshare FT232 USB UART Board (mini)

USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. DFRobot DFR0174

USB - RS232 adapter equipped with a USB type A connector and an RS232 connector in the DB9 female standard. It uses the original FTDI FT232RL chip, which guarantees a reliable connection between a variety of devices. Waveshare USB-TO-RS232-Female-Cable

Easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH; works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers; uses the CH340G IC to quickly and easily convert serial signals to USB. DEV-14050

The base plate is dedicated to ESP32 CAM modules. It allows you to connect the camera via a USB interface, e.g. to a computer. ESP32-CAM-MB