Gravity: Analog Current Sensor 50A (AC/DC) V2 - 50A analog AC/DC current sensor module
ID: 1185022
zł73.89
Tax included
zł60.07 tax excl.
Analogue current sensor module. Allows measurement of AC and DC currents up to 50 A. DFRobot SEN0098-V2
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
SC780 analogue current sensor module. It can measure AC and DC currents up to 50 A. The module has an analogue output compatible with the Gravity standard. The measurement is based on the use of the Hall effect. The sensor is characterised by stable measurement and almost zero magnetic hysteresis. The circuit used has a low internal resistance of 80 μΩ, so it generates low power losses during operation. The module will find application in automation control projects. A user manual with an example Arduino program is available on the Wiki page.
Features
- Current measurement range: -50 to 50 A
- Bandwidth: 80 kHz
- Output rise time of 3.64 μs in response to a step input current
- Stable output voltage
- Nearly zero magnetic hysteresis
- Internal resistance 80 μΩ
- Interface: Gravity PH2.0-3P
- Power supply: 5 V
- Operating temperature: -40℃ to 125℃
- Dimensions: 34 x 42 mm
Kit contains
- AC/DC current sensor module
- Gravity-3P cable
1185022
Data sheet
- Interface
- Sygnał analogowy
- Zakres pomiarowy
- ±50 A
- Sposób podłączenia
- Szeregowy
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł113.90
24h
Available quantity: 65
Available
Available
Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214
zł44.51
Delivery date unknown
No product available!
Other products in the same category (16)
The module with the ACS70331 current sensor with a direct current measuring range up to 2,5 A. The board is equipped with a Grove connector and communicates via an analog interface. Seeed Studio 101020652
zł48.34
24h
Available quantity: 3
Available
The current measurement with the value 0-20A is carried out by the ACS712-05 system based on the Hall effect. The sensitivity of the system is 100mV / A (analogue signal) .modACS712-20
zł8.40
6 weeks
No product available!
This board is a simple carrier of Broadcom’s bidirectional ±40A ACHS-7124 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. Pololu 4033
zł34.26
24h
Available quantity: 6
Available
Module with bi-directional current sensor based on the INA226 system. It allows you to measure current and power, works with a voltage of 0-36 V. It has an I2C interface.
zł29.90
24h
Available quantity: 45
Available
Module with an analog AC current sensor in a set with a probe for non-contact measurement of alternating current with a current of up to 20 A. DFRobot SEN0211
zł98.45
24h
Available quantity: 2
Available
Module with an analog current sensor. Enables measurement of alternating and direct current up to 20 A. DFRobot SEN0214
zł44.51
4 weeks
No product available!
ACS714 Current Sensor Carrier -30 to +30A
zł53.03
24h
Available quantity: 2
Available
ACS724LLCTR-2P5AB current sensor module with a DC and AC measurement range from -2.5 to +2.5 A. It communicates via an analog interface. Pololu 4040
zł65.52
6 weeks
No product available!
Module with ACS724LLCTR-30AU current sensor with a measuring range of direct and alternating current from 0 to 30 A. It communicates via an analog interface. Pololu 4046
zł52.32
6 weeks
No product available!
Module with ACHS-7122 current sensor with a measuring range of direct and alternating current from -20 to 20 A. It communicates via an analog interface. Pololu 4031
zł31.83
24h
Available quantity: 5
Available
Module with ACS724 current sensor with a measuring range of direct and alternating current from 0 to 10 A. It communicates via an analog interface. Pololu 4045
zł58.01
24h
Available quantity: 1
Available
Current-to-voltage converter module designed for devices with a current signal output. It allows linear conversion of current signals from 0 to 25 mA into voltage signals from 0 to 3 V. DFRrobot SEN0262
zł25.83
24h
Available quantity: 1
Available
ACS724LLCTR-30AB current sensor module with a DC and AC measurement range from -30 to +30 A. It communicates via an analog interface. Pololu 4047
zł52.36
24h
Available quantity: 6
Available
ACS724LLCTR-10AB current sensor module with a DC and AC measurement range from -10 to +10 A. It communicates via an analog interface. Pololu 4043
zł52.36
6 weeks
No product available!
Module with ACHS-7123 current sensor with a measuring range of direct and alternating current from -30 to 30 A. It communicates via an analog interface. Pololu 4032
zł34.06
24h
Available quantity: 4
Available
Module with an analog current sensor. It enables the measurement of AC and DC current up to 50 A. DFRobot SEN0098
zł134.91
4 weeks
No product available!
Analogue current sensor module. Allows measurement of AC and DC currents up to 50 A. DFRobot SEN0098-V2