HRXL-MaxSonar-WRST7 - ultrasonic distance sensor MB7374 (50-500cm)

VL53L8CX sensor module that offers fast and accurate distance measurement up to 4 m via I²C or SPI digital interface. It can measure distances to multiple targets simultaneously, providing depth map data with a resolution of up to 8x8. The built-in power supply circuit allows operation in the voltage range from 3.2 V to 5.5 V. Pololu 3419

The ultrasonic distance sensor modUS-015 is based on the analysis of the delay of reflection of the ultrasonic wave from the obstacle - the range of the sensor from 2 to 400 cm with an accuracy of 0.3 cm + 1%

Ultrasonic distance sensor MB1010 with a range from 0 to 645 cm. It has an output in the form of a serial interface, analog signal or generates an impulse whose duration is proportional to the measured distance. Pololu 726

Ultrasonic ToF sensor dedicated to the identification of materials at a distance of 2 to 10 cm. It can distinguish between hard and soft materials and transmits information via digital IO (high/low) or UART interface. DFRobot SEN0560

Module with a distance sensor with a range of up to 300 cm. It has a digital output that generates a pulse with a width proportional to the measured length. Pololu 4079

This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This low-brightness version draws an average of 8 mA at 5 V and has a typical sensing range up to approximately 12 inches (30 cm).

Module with ToF distance sensor based on the VL53L0X system. It offers a range of 3 to 200 cm and communicates via the I2C interface. TOF200C

ToF distance sensor module based on the VL53L1X system. It offers a range from 4 to 400 cm and communicates via the I2C interface

Laser scanner (Lidar) 360 degrees with a measurement frequency of 10 Hz and 16,000 measurements / second. Range up to 25m, measuring error at 1%. Sparkfun SEN-15045

This sensor is a carrier/breakout board for ST’s VL6180X proximity and ambient light sensor, which measures the range to a target object up to 20 cm away (or 60 cm with reduced resolution). Pololu 2489

ToF distance sensor module based on the VL6180X system. It offers a range of up to 10 cm and communicates via the I2C interface. Adafruit 3316

Module with a digital distance sensor with a range of up to 25 cm. It has a digital output that goes low when an object is detected. Pololu 4066

The GP2Y0A60SZ offers a wide detection range of 4″ to 60″ (10cm to 150cm) and a high update rate of 60Hz. The distance is indicated by analog voltage - only a single analog input is required to interface with the module. Pololu 2476

Ultrasonic distance sensor (sonar) with a measuring range from 50 cm to 5 m. It allows you to read data through one of three interfaces: variable width pulse, analog output or UART TTL interface. DFRobot SEN0278

The Sharp GP2Y0A02YK0F sensor enables precise distance measurement in the range of 20–150 cm using an analog output. Its stable characteristics and ease of integration make it a popular solution in mobile robotics and obstacle detection systems.

Distance measurement tester designed for HC-SR04 ultrasonic sensor. It is equipped with a 3-digit 7-segment LED display showing the current measurement and a measurement processing system with UART output