Soldered Inkplate 6COLOR - 5.65" e-paper with enclosure and battery

3.5" E-Ink e-paper display with a resolution of 384x184 px supporting red, yellow, black and white colors. The module includes a driver board with SPI interface and an onboard level translator allowing operation with 3.3 V and 5 V microcontrollers. Waveshare 3.5inch e-Paper Module (G)

3.7" E-Ink e-paper display with a resolution of 416×240 px supporting red, yellow, black and white colors. The display communicates via the SPI interface and is designed to operate with an external driver board or microcontroller. Waveshare 3.7inch e-Paper (G)

3.7" E-Ink display with a resolution of 416×240 px supporting red, yellow, black and white colors. The module with HAT+ driver board features an SPI interface and a Raspberry Pi 40-pin GPIO connector, compatible with Raspberry Pi, Jetson Nano, Arduino, STM32 and ESP32 platforms. Waveshare 3.7inch e-Paper HAT+ (G)

5" e-Paper display with 960 x 552 px resolution and SPI interface, designed for integration with external controller circuits. Low power consumption, no backlight. Waveshare 5inch e-Paper

5" e-Paper display with 960 x 552 px resolution, HAT driver board, SPI interface and support for Raspberry Pi and other platforms. Low power consumption, no backlight. Waveshare 5inch e-Paper HAT

A 10.3-inch ePaper display with a resolution of 1404 x 1872 pixels, designed for presenting text and graphics with high readability. The screen supports up to 16 levels of grayscale, allowing for the display of more detailed illustrations, icons, and graphs. The display uses a TTL interface and a 40-pin FPC connector, enabling integration with systems based on the XIAO, Arduino, and MicroPython platforms. Seeed Studio 100071485

A 10.3-inch ePaper touchscreen display with a resolution of 1404 x 1872 pixels offers a clear image with very low power consumption. Equipped with an ESP32-S3 microcontroller with 8 MB of PSRAM, Wi-Fi and Bluetooth connectivity enable easy integration with IoT systems and remote management. The device has a 3000 mAh battery for up to 6 months of operation and supports interfaces created in the SenseCraft HMI, Arduino, and PlatformIO environments. Seeed Studio 100090602

Development kit featuring a 13.3" full-color E-Paper display with 1600 × 1200 px resolution and an ESP32-S3-based driver board. Utilizes E Ink Spectra 6 (E6) technology, supports 2.4 GHz WiFi and Bluetooth LE, and includes a TF card slot, audio codecs, and a Li-Ion battery charging circuit. Waveshare ESP32-S3-ePaper-13.3E6

Programmable module with a 6-inch 800 × 600px e-paper display supporting black-and-white mode, 8 grayscale levels and partial refresh. Based on ESP32-WROVER with WiFi and Bluetooth, it also provides microSD, RTC, Qwiic/easyC and USB-C connectivity. Version with enclosure and 1200mAh Li-Ion battery. Soldered 333229

Programmable 5.65" color e-paper module with a 600 × 448px AC057TC1 display supporting 7 colors. Based on ESP32-WROVER with WiFi and Bluetooth, it includes microSD, RTC, USB-C, easyC / Qwiic and a 3.7V 1200mAh Li-Ion battery with a 3D-printed enclosure. Soldered 333231

Programmable module with a large 9.7-inch 1200 × 825px e-paper display, based on ESP32 with WiFi and Bluetooth. It supports grayscale and partial refresh, and provides microSD, RTC, Qwiic, USB-C, Arduino and MicroPython support. Version with enclosure and 3000mAh Li-Ion battery. Soldered 333247

Programmable 6" 1024 × 758px touchscreen e-paper module based on ESP32 with WiFi and Bluetooth. Features two-point capacitive touch, 64-step frontlight control, microSD, RTC, Qwiic/easyC and support for Arduino, MicroPython and ESP-IDF. Version with enclosure and Li-Ion battery. Soldered 333320

Programmable 6-inch e-paper display with a resolution of 1024 x 758 px, supporting 16 grayscale levels and fast partial refresh in 91 ms, corresponding to up to 11 FPS. The board uses an STM32H743ZIT6 microcontroller and ESP32-C3 coprocessor, providing WiFi, Bluetooth, integrated sensors, a microSD slot, USB-C, and more than 30 GPIO lines. Soldered 333321

Programmable module with a 6-inch 1024 × 758px e-paper display supporting 16 grayscale levels and partial refresh in approximately 91ms. Powered by an STM32H743ZIT6 with an ESP32-C3 co-processor for WiFi and Bluetooth, and equipped with microSD, RTC, Qwiic and multiple onboard sensors. Version with enclosure and 1200mAh Li-Ion battery. Soldered 333324

Programmable 5.2" e-paper display board with 1280 × 720px landscape resolution, based on ESP32 with WiFi and Bluetooth 4.0 LE. Features approximately 0.22s partial refresh, microSD, RTC, Qwiic and support for Arduino, MicroPython and ESP-IDF. Version with e-paper display, without enclosure or battery. Soldered 333333

Programmable 5.2" e-paper module with 1280 × 720px resolution, ESP32, WiFi and Bluetooth LE. Features partial refresh, microSD, RTC, Qwiic/easyC, USB-C and a 1200mAh Li-Ion battery. Version with enclosure. Soldered 333336