Rotary potentiometer - Grove module
ID: 564185
zł35.28
Tax included
zł28.68 tax excl.
Module with rotary potentiometer. The connector in this module has been moved to the other side of the PCB, which makes it easier to assemble and use this module. The module has a connector in accordance with the Grove standard. Seeed studio 101020048
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Module with rotary potentiometer. The connector in this module has been moved to the other side of the board, which makes it easier to assemble and use this module. The module has a connector in accordance with the Grove standard.
The module can be used with the Base Shield V2 - shield extension with Grove connectors for Arduino
properties
- Swivel range: 0-300 degrees
- Resistance: 10 kΩ
- Output voltage: 0-5 V (with 5V power supply)
- Power supply: 4.75-5.25 V
- Dimensions: 19 x 19 x 30.1 mm
564185
You might also like
A small module with a temperature sensor (thermistor). As the temperature changes, the resistance of the thermistor changes, which allows the temperature to be measured in the range from -40 to 125 ° C with an accuracy of 1.5 ° C. The module has a connector in accordance with the Grove standard. Seeed studio 101020015
zł15.78
24h
Available quantity: 4
Available
Module with a slide potentiometer. Depending on the position of the slider, the resistance value (maximum resistance 10kΩ) changes, which translates into the voltage value at the analog output of the module. The module has a connector in accordance with the Grove standard. Seeed studio 101020036
zł35.36
24h
Available quantity: 2
Available
Base Shield V2 is an extension for tiles with an Arduino shield connector, it has a Grove connector, which can be connected to Grove-compatible modules / sensors. Seeedstudio 103030000
zł24.40
24h
Available quantity: 20
Available
Other products in the same category (16)
Pololu G2 18v15 High Power is a miniature DC motor controller. Power supply for the controller: 6.5 ... 30 V. Current efficiency of the module: 15 A. The module has protection against back voltage and overvoltages. Pololu 1362
zł533.13
24h
Available quantity: 1
Available
The BMS module is designed for 4 Li-Ion cells. It is equipped with a micro USB and USB type C connector and supports fast charging (QC).
zł27.00
Delivery date unknown
No product available!
DFR0379
zł25.90
24h
Available quantity: 6
Available
Pmod PIR is a module with a PIR motion sensor (EKMC1601111), which allows you to detect motion up to 5 meters from the module. The sensor during operation is characterized by low power consumption. Digilent 410-389
zł98.68
24h
Available quantity: 3
Available
A small USB-UART TTL converter module based on the CH340 system with a USB type A connector. Designed for the ESP-01 and ESP-01S modules
zł5.68
24h
Available quantity: 42
Available
Audio module with DAC, headphone amplifier and display, designed to work with the Raspberry Pi. It is based on the PCM5100A system and communicates via the I2S interface. Pimoroni PIM482
zł139.79
24h
Available quantity: 3
Available
Controller of three-phase BLDC motors based on Trinamic\'s TMC6300 chip. Allows motion control of drives with a current consumption of up to 2 A. SparkFun ROB-21220
zł143.75
24h
Available quantity: 2
Available
USB adapter designed for XBee modules. It can be connected to a computer with a USB cable and used with the X-CTU software to configure the XBee. DFRobot DFR0174
zł97.48
24h
Available quantity: 2
Available
MP3 player with support for microSD cards and USB memory. It can work as a separate device and play sounds from a card or pendrive
zł9.40
6 weeks
No product available!
Module with a stepper motor driver based on the DRV8434 system. It allows you to power a bipolar motor with a current of up to 1.2 A per phase and a voltage from 4.5 V to 48 V. Pololu 3762
zł45.61
24h
Available quantity: 2
Available
Single-channel DC motor driver with an operating voltage from 8 to 28 V and a continuous current up to 160 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDS160A
zł1,162.14
6 weeks
No product available!
Industrial module with an Ethernet interface that allows you to control 8 relays via the RJ45 port. It uses Modbus TCP protocol, supports PoE (Power over Ethernet) and is equipped with a rail-mounted housing. Waveshare Modbus POE ETH Relay
zł190.87
6 weeks
No product available!
Raspberry Pi Camera Module, Fisheye Lens, Wider Field of View. Waveshare RPi Camera (J)
zł127.01
24h
Available quantity: 8
Available
Module with 8 relays with a voltage of 12 V and a load of up to 10 A. The board communicates via the Ethernet interface. Numato Lab 8ETHRL001
zł525.55
24h
Available quantity: 1
Available
Pololu 5V Step-Up/Step-Down Voltage Regulator S7V7F5
zł29.98
24h
Available quantity: 9
Available
The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and USB typ A output. Allows you to power devices with 5 V, 9 V, 12 V, 15 V and 20 V and test chargers by replacing the PD device
zł43.94
24h
Available quantity: 2
Available
Module with rotary potentiometer. The connector in this module has been moved to the other side of the PCB, which makes it easier to assemble and use this module. The module has a connector in accordance with the Grove standard. Seeed studio 101020048