Fuse Breakout Kit - module with a fuse

Compact module with MOSFET IRF520 24V/5A transistor.

Keyboard module with 10 tact switch buttons. The state of the buttons can be read using digital pins or a common analog output. DFRobot DFR0792

Gravity module designed based on the GP8413 system. It is a two-channel DAC (analog-to-digital) converter with I2C communication that offers an output signal with a resolution of 15-bit and an accuracy of 0.2%. It allows you to generate analog signals with a voltage range from 0 to 10 V or 0 to 5 V. DFRobot DFR1073

Power module based on a DC-DC Step-Down converter with a current efficiency of up to 20 A. The output voltage is adjustable in the range from 0 V to 50 V. The power supply offers power up to 1000 W. WZ5020L

The oCam supports plug-and-play by UVC compliant adapting the standard M12 lens with focal length of 6mm

1-channel module with a relay designed to work with the Raspberry Pi Pico. It can switch signals up to 250 V AC and 7 A or 30 V DC and 10 A. SB Components 21277

A module with a distance sensor GP2Y0E03 operating in the infrared band. The sensor measures between 4-50cm.

Stepper motor driver with MP6500 system with a potentiometer for current regulation. It allows the bipolar motor to be supplied with current up to 1.5A per phase without the use of a heat sink. Pololu 2967

Module with barcode and QR scanner. It allows you to read one-dimensional and two-dimensional codes using the intelligent image recognition algorithm. It has a built-in USB and UART interface. GM73

Power supply module with a basket for a 18650 battery. It can provide a current of 3 V and 1 A or 5 V and 2 A

The compact (0.4″ × 0.5″) D24V5F15 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 15 V while allowing for a maximum output current of 500 mA. Pololu 2847

A single-channel DC motor controller with an I2C interface. It is powered from 1.8 V to 22 V and can deliver up to 1.8 A of current. Board with soldered connectors. Pololu 5074

Module with 1 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4241

A module with a set of resistors and mechanical switches that allows you to adjust the resistance in the range from 0 to 999990 Ω. SparkFun KIT-13006

DC motor driver that allows you to control the movement of three drives using the I2C interface. Pololu 5035