ESP32-P4 Development Board with 5″ IPS Touch LCD 720 × 1280 Wi-Fi 6 + OV5647 Camera - Waveshare 33763

Description

Development board based on the ESP32-P4 microcontroller, equipped with a 5″ IPS display with 720 × 1280 resolution and a 5-point capacitive touch panel. The module supports 2.4 GHz Wi-Fi 6 and Bluetooth 5 LE via the ESP32-C6 co-processor, enabling advanced IoT, embedded systems, and edge computing applications.

Integrated audio circuits (ES8311 codec and ES7210 echo cancellation chip) along with dual microphones enable audio processing, voice communication, and voice control interfaces. The RISC-V architecture combined with support for image processing (ISP, JPEG, H.264) allows use in multimedia systems and AI applications.

A microSD card slot enables data storage, while USB Type-C interfaces (USB OTG and UART) provide power, programming, and communication. The 40-pin GPIO header enables integration with expansion modules, including selected Raspberry Pi HATs. The MIPI-CSI connector allows camera connection, and the included OV5647 camera enables image capture, video processing, and vision-based system development without additional modules.

The MX1.25 connector allows connection of a 3.7 V Li-Ion battery (not included) for portable applications.

1. ESP32-P4-Core – integrated ESP32-P4NRW32 and 32 MB NOR Flash
2. ESP32-C6-MINI-1 module – SDIO interface, Wi-Fi 6 and Bluetooth 5 LE extension
3. ES7210 – echo cancellation chip for improved audio capture
4. ES8311 – low-power audio codec for audio encoding and decoding
5. MIPI CSI interface – 15-pin, 1.0 mm pitch, for MIPI 2-lane camera
6. 2.54 mm 4-pin pads – ESP32-C6 firmware programming
7. RTC battery header – for rechargeable RTC battery
8. POWER button – short press: power on, long press (2 s): power off
9. BOOT button – enter download mode during boot/reset
10. RESET button
11. microSD (TF) card slot – SDIO 3.0 interface
12. MIPI DSI interface – for MIPI 2-lane display
13. speaker connector – GH 1.25 2-pin (lock), supports 8 Ω / 2 W speaker
14. USB Type-C (UART) – power, programming, debugging
15. USB Type-C (OTG) – USB OTG 2.0 High Speed
16. onboard microphones – dual microphone array
17. PWR LED – power indicator
18. MX1.25 battery connector – 2-pin, for 3.7 V Li-Ion battery, charging/discharging support
19. 40-pin expansion header – 2.54 mm pitch, compatible with selected Raspberry Pi HATs

Features

• ESP32-P4 microcontroller (RISC-V, multi-core)
• ESP32-C6-MINI co-processor – Wi-Fi 6 (2.4 GHz) and Bluetooth 5 LE
• memory: 32 MB PSRAM + 32 MB Flash
• 5″ IPS display, 720 × 1280 resolution
• capacitive touch panel, 5-point (GT911)
• MIPI-DSI (LCD) and MIPI-CSI (camera) interfaces
• ES8311 audio codec + ES7210 echo cancellation
• dual microphones, speaker connector (8 Ω / 2 W)
• hardware image processing support (ISP, JPEG, H.264)
• OV5647 camera included
• microSD card slot (SDIO 3.0)
• USB Type-C (UART – power, programming, debug)
• USB Type-C (OTG 2.0 High Speed)
• 40-pin GPIO (compatible with selected Raspberry Pi HATs)
• 3.7 V battery connector (MX1.25) – charging and discharging
• I2C, UART, GPIO interfaces
• security features: Secure Boot, Flash Encryption, TRNG

Kit includes

• ESP32-P4-WIFI6-Touch-LCD-5 board
• 8 Ω 2 W speaker (with cable)
• OV5647 camera