ISM RFM12B-868DP radio module 868 MHz
ID: 572803
5906623494910
zł16.58
Tax included
zł13.48 tax excl.
The ISM radio module in the DIP housing. It operates on the 868 MHz frequency. The module complies with FCC, ETSI regulations. HOPE MICROELECTRONICS RFM12B-868DP
Description
RFM12B-868DP is an ISM radio module in the DIP housing. It operates on the 868 MHz frequency. The module complies with FCC, ETSI regulations. The SPI interface is used to communicate with the microcontroller. The module is a complete analog RF transceiver with PLL synthesizer with PA, LNA, converter mixers, filters and baseband amplifiers and demodulator. All required RF functions are integrated. RFM12B significantly reduces the microcontroller load due to the integrated digital data processing function. The module will be used in such projects as remote control of devices, toys or wireless data acquisition from sensors.
properties
- Operating frequency 868 MHz
- High data transmission speed (up to 115.2 kb sz with an internal demodulator, with an external controller)
- Differential antenna input / output
- Automatic antenna tuning
- Programmable TX frequency deviation (from 15 to 240 KHz)
- Programmable bandwidth of the receiver (from 67 to 400 kHz)
- Analog and digital signal strength indicator (ARSSI / DRSSI)
- Automatic frequency control (AFC)
- Data quality detection (DQD)
- Internal data filtering
- Serial control interface compatible with the SPI interface
- Clock and reset signal output for external MCU use
- 16 bit RX FIFO data
- Two 8-bit TX data registers
- Power supply: 2.2 ... 3.8 V
- Low power consumption
- Standby current less than 0.3 uA
- Supports very short packets (up to 3 bytes)
572803
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
The modRemProg remote control operating at 433 MHz enables cloning of fixed-code remote signals, supporting up to four devices. It is suitable for controlling gates, doors, and alarm systems, offering a simple programming procedure and a compact, durable design.
zł13.90
4 weeks
No product available!
A GFSK transceiver operating in the ISM 2400 ... 2483.5 MHz frequency range. Powered by a voltage of 1.9 ... 3.6 V, the pins are goldpin connectors. It has a built-in PCB antenna. HOPE MICROELECTRONICS RFM75-S
zł5.50
24h
Available quantity: 5
Available
The NRF24L01+ chip module for radio communication, which operates in the 2.4 GHz ISM band. It is used in various applications such as wireless sensors, remote control, wireless networks. It supports the Enhanced ShockBurst protocol, which provides automatic packet handling. It communicates via an SPI interface
zł12.36
24h
Available quantity: 8
Available
Expansion board for STM32 Nucleo based on S2-LP RF transmitter operating in 868MHz band. The expansion board is compatible with ST morpho and Arduino UNO R3 connectors. STMicroelectronics X-NUCLEO-S2868A2
zł161.81
24h
Available quantity: 3
Available
Module with a radio receiver operating at 315 MHz for Arduino. DFRobot TEL0075
zł33.73
24h
Available quantity: 1
Available
Long-range Sub-GHz wireless RF transmitter and receiver module, capable of operating in the 433 MHz frequency band. The integrated architecture allows the use of a minimum number of external components while maintaining maximum design flexibility. Hoperf RFM69HW-433S
zł18.91
24h
Available quantity: 5
Available
Module with 2.4 GHz transceiver system (transmitter and receiver) LT892. It is powered with the voltage of 3.3 V and has a built-in antenna
zł5.67
24h
Available quantity: 17
Available
SYN115/SYN480R set enables the implementation of 433 MHz wireless communication in DIY projects and microcontroller systems. It is suitable for applications in remote control systems, home automation, and data transmission between devices.
zł6.32
24h
Available quantity: 9
Available
Wireless switch operating at 433 MHz frequency. It does not require a power supply. DFRobot TEL0146
zł44.65
24h
Available quantity: 2
Available
The module enables remote control of four independent devices using the 433 MHz band. Simple configuration of operating modes and the ability to tune the receiver make the set suitable for automation, lighting systems, and remote control of devices.
zł27.66
24h
Available quantity: 3
Available
A module with a 433 MHz radio transmitter for the M5Stack sets. Based on the SYN115 chip, it has a built-in PCB antenna. M5Stack U114
zł24.90
24h
Available quantity: 3
Available
NRF24L01 module with UART serial interface. It has a built-in antenna and a microcontroller that acts as a converter. It allows the design and testing of 2.4 GHz radio communication via a serial interface
zł35.18
24h
Available quantity: 4
Available
Available
DFRobot 315MHz RF receiver module using SC2272-L4 low power decoder chip. DFRobot TEL0112
zł33.97
24h
Available quantity: 1
Available
The FS1000A transmitter and the MX-RM-5V receiver enable communication in the ISM band; they are easy to use, do not require advanced bus control and have very small dimensions. Especially recommended for work with Arduino and STM32
zł5.63
24h
Available quantity: 30
Available
Long-range Sub-GHz wireless RF transmitter and receiver module, capable of operating in the 868 MHz frequency band. The integrated architecture allows the use of a minimum number of external components while maintaining maximum design flexibility. Hoperf RFM22B-868S2
zł23.37
24h
Available quantity: 2
Available
The ISM radio module in the DIP housing. It operates on the 868 MHz frequency. The module complies with FCC, ETSI regulations. HOPE MICROELECTRONICS RFM12B-868DP