KAmodNFC - an expander with NFC/RFID, compatible with Arduino and NUCLEO
ID: 557725
5906623433230
zł28.91
Tax included
zł23.50 tax excl.
KAmodNFC is an expansion board with M24LR64E-R chip – dynamic tag with 64kb EEPROM memory and dual communication interface (I2C/RF). On board is placed also signalization of energy harvesting function, which is in M24LR64E-R chip embedded.
Description
KAmodNFC is an expansion board with M24LR64E-R chip – dynamic tag with 64kb EEPROM memory and dual communication interface (I2C/RF). On board is placed also signalization of energy harvesting function, which is in M24LR64E-R chip embedded.
Features
- Chip M24LR64E-R - dynamic NFC tag / RFID from STMicroelectronics
- Energy harvesting powers supply line on connector (+Vhr) with effciency max. 7mA
- Embedded microstrip antenna, designed for work with frequency 13.56MHz
- Connectors compatible with z Arduino UNO R3
- Possibility of using another shield compatible with z Arduino UNO R3
- Embedded tri color user RGB LED
- Embedded module of work stabilization with energy harvesting
- Mounting hole 3mm
- Module size: 74mm x 52mm x 20mm
Application example (KAmodNFC board connected to the KAmduino UNO):
 |
 |
Kit content
- KAmodNFC module
557725
Data sheet
- Communication
- NFC/RFID
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
64-Kbit Dual Interface EEPROM with password protection, energy harvesting and RF status functions, SO8N, STM, RoHS
zł6.47
24h
Available quantity: 276
Available
Demonstration kit for M24LRxx Dual Interface EEPROMs, STM, RoHS
zł4,805.09
24h
Available quantity: 2
Available
Development kit for ST Dual Interface EEPROM (M24LRxx-R), STM, RoHS
zł3,099.00
24h
Available quantity: 1
Available
Development board with dimensions and spacing compatible with Arduino Uno R3. It have built-in Wi-Fi ESP8266 module. The device is compatible with WeDOS D1, it can be programmed from the level of Arduino IDE
zł25.31
24h
Available quantity: 15
Available
The X-NUCLEO-NFC02A1 is a dynamic NFC/RFID tag board based on M24LR04E-R, for expansion of STM32 Nucleo boards
zł52.15
24h
Available quantity: 2
Available
KA-NUCLEO-F411CE v2 is a development board based on the STM32F411CE microcontroller. It has a built-in programmer compatible with ST-Link / v2-1, it is possible to program and debug the microcontroller via the USB connector.
zł89.90
24h
Available quantity: 141
Available
Versatile development board with the ATmega328P microcontroller, which, thanks to its compatibility with Arduino UNO and variety of functions, is an excellent choice for many projects
zł49.72
24h
Available quantity: 137
Available
Other products in the same category (16)
Available
KAmodRPi-Pmod-HAT is a HAT for Raspberry Pi 5/4B/3B+/3B/2B/B+ minicomputers that allows use of the communication interfaces available on the 40-pin minicomputer connector
zł42.90
24h
Available quantity: 260
Available
Module with a 4-bit bi-directional voltage level converter. It allows you to connect digital interfaces with different operating voltages. KAmodNTS0104PW
zł18.91
24h
Available quantity: 394
Available
KAmodM41T82 is a module with the STMicroelectronics M41T82 RTC clock. The chip allows precise timing, and an additional battery connector allows you to maintain the power supply when the main power is turned off. Communication with the module is realized via I2C bus.
zł31.49
24h
Available quantity: 463
Available
KAmodWS2812-1 is a module with WS2812 multicolor LED. Thanks to the embedded controller, LED can be series connected to makes an amazing light effects. KAmodWS2812-1
zł7.40
24h
Available quantity: 1330
Available
KAmodMPC17C724 is a module with a double MP bridge bridge type MPC17C724. The system allows you to control two DC brush motors or one bipolar stepping motor. The controller operates at a voltage range of 2.7 - 5.5 V and can work with motors with power consumption up to 0.4 A.
zł19.90
24h
Available quantity: 336
Available
KAmodMMA7361LC is an accelerometer module with an analogue output, equipped with the MMA7361LC chip. It has a embedded voltage regulator, so it can be used in systems supplied with voltage of 2.5...5.5V.
zł28.91
24h
Available quantity: 192
Available
KAmodRPi-GPRS-GPS is an overlay for Raspberry Pi 4 / 3B + / 3B / 2B / B + computers, which allows you to enrich the system with the ability to send data via GPRS, SMS transmission or work as a module for Bluetooth communication. This extension also offers the ability to receive satellite data from location systems - GPS and GLONASS.
Regular pricezł229.00zł206.10
24h
Available quantity: 47
Available
Available
KAmodLSM303C is a module with the MEMS LSM303C chip from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows measurement of accelerations and magnetic field values in three axes
zł37.90
24h
Available quantity: 406
Available
KAmodDIGIpot is a miniature digital potentiometer module. It allows, by means of two PU / PD inputs, to change the resistance value between the outputs A, W, B (compatible with the outputs of the analog potentiometer), using buttons or outputs of the microcontroller. Adjustment in 32 steps, value 10k.
zł19.90
24h
Available quantity: 161
Available
KAmodPCF8883T is a module with capacitive touch sensor PCF8883 from NXP. The module has a probe placed on the PCB and a diode indicating the state of the chip. It enables work in one of three modes.
zł19.90
24h
Available quantity: 431
Available
Module with NXP temperature sensor. It allows you to measure temperature in the range from -55 °C to +125 °C. I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector
zł17.90
24h
Available quantity: 416
Available
Pressure sensor module with I2C interface (MPL115A2)
zł44.90
24h
Available quantity: 19
Available
Available
A 30 cm long connecting cable (4 wires) designed for use with Kamami KAmod modules. It is terminated on both ends with a plug that fits the WF04S connector that KAmod modules are equipped with. cabhu04-30
zł6.90
24h
Available quantity: 3
Available
KAmodNFC is an expansion board with M24LR64E-R chip – dynamic tag with 64kb EEPROM memory and dual communication interface (I2C/RF). On board is placed also signalization of energy harvesting function, which is in M24LR64E-R chip embedded.