DFRobot Gravity - Self-locking, digital switch

Two-button module with 4 colored overlays. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020103

Module with 5 colored buttons. Each button is powered independently and has an output informing about its status

The modTTP223 module is a capacitive touch sensor that detects touch on the sensor surface and generates a digital output signal. With its compact size (14 x 11 mm) and operating voltage range of 2 V to 5.5 V, it is ideal for integration with microcontrollers such as Arduino or Raspberry Pi in projects requiring a touch interface.

The modKB3x4 module is a 12-button matrix membrane keypad arranged in a 3x4 layout, allowing easy data input in electronic projects. With its compact size and simple interface, it is ideal for integration with microcontrollers such as Arduino or Raspberry Pi in applications requiring a user interface. modKB3x4

5-button keyboard module with analog output

Module with AT42QT1060 controller - contectless keyboard controller, Kamami, RoHS.

Keyboard module with 16 buttons in the form of a 4x4 matrix. Equipped with an 8-pin connector with 2.54 mm pitch

Keyboard module with 10 tact switch buttons. The state of the buttons can be read using digital pins or a common analog output. DFRobot DFR0792

Module with a button and green LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-G

Touch keyboard module with 4 buttons based on the TTP224 system. It is equipped with a connector with derived signals and 4 LEDs signaling the state of each button

The touch sensor module (touch button) can be used as a replacement for traditional mechanical buttons. It operates based on the TTP223-B system, which measures the capacity of the metal field on the module. The module has a connector in accordance with the Grove standard. Seeed studio 101020037

Module with a bistable button and blue LED backlight. The board is equipped with a Gravity connector and communicates via a digital interface. DFRobot DFR0785-B

Module with 12-position rotary switch. It is supplied with the voltage ranging from 3.3 V to 12 V and has an analog output (Gravity connector). DFRobot SEN0156

A module for building a mechanical keyboard with 16 buttons and backlight. Based on the RP2040 chip, it has sockets compatible with Cherry-MX switches. Pimoroni PIM567

Conductivity Sensor Switch DFRobot is a touch button that allows you to change the sensor output status by connecting terminals (positive and negative) using metal, human body or fruit and plants. It is powered by 3.3 ... 5 V. DFRobot SEN0223

Module with a button, LED diode and a green cap. DFRobot DFR0029-G