zł52.24 tax excl.
Ambient light sensor with a wide measurement range from 0.045 lx to 188,000 lx and a 22-bit dynamic range. It communicates via the I2C bus, supports automatic range adjustment and works with systems using 3.3 V and 5 V logic. STEMMA QT / Qwiic connectors simplify solderless integration. Adafruit 6498
The MAX44009 ambient light sensor (Adafruit 6498) measures light intensity over a wide range from 0.045 lx to approximately 188,000 lx. The sensor provides a 22-bit dynamic range, resolution down to 0.045 lx/LSB and automatic range adjustment according to current lighting conditions. Software-adjustable integration time is also available. The sensor can be used in lighting automation, environmental monitoring systems, IoT devices and other projects requiring light intensity measurements in lux.

Communication is provided via the I2C bus, while the integrated 3.3 V regulator and logic level shifter enable operation with systems using 3.3 V or 5 V power and logic. STEMMA QT / Qwiic connectors allow the module to be connected without soldering using a compatible cable. Arduino and CircuitPython libraries simplify integration with microcontrollers and Raspberry Pi computers. STEMMA QT / Qwiic cable is not included.
Manufacturer
Responsible person
No product available!
DFRobot Gravity analog light intensity module for Arduino and Raspberry Pi. DFRobot DFR0026
Sensor for detecting the distance, intensity and frequency of light (lightning) within a radius of 40 km. The module enables weather enthusiasts to measure data about local storms. DFRobot SEN0290
A 5-channel flame detector module for detecting a flame over a larger area. Detects fire with 5 sensors that are placed on the module every 30 degrees. It has a digital and analog output. modFLAME-5CH
This sensor is a carrier/breakout board for ST’s VL6180X proximity and ambient light sensor, which measures the range to a target object up to 20 cm away (or 60 cm with reduced resolution). Pololu 2489
he flame detector module detects the source emitting a wavelength between 760 and 1100 nm. It allows to detect, among others source of fire. Analog interface. DFRobot DFR0076
No product available!
Heart rate monitor module based on the popular MAX30101 chip. The board is equipped with connectors compliant with the Qwiic standard. SparkFun SEN-16474
No product available!
Grove module with a proximity sensor, light, color and the ability to detect gestures. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020580
Module with an ambient light sensor VEML6030 with a measuring range up to 120,000 lx. It enables light measurement with 16-bit resolution. I2C communication. SparkFun SEN-15436
Module with an analog light sensor. It consists of a photoresistor and a LED. Equipped with a Gravity connector. DFRobot DFR0022
Module with an analog TEMT6000 light intensity sensor. The voltage at the output is linearly correlated with the intensity of the incident light. The module is supplied with the voltage from 3.3 to 5V. DFRobot SEN0043
Module with a light sensor (photoresistor) designed for M5Stack sets. An analog output and a digital output have been led out on the Grove connector. M5Stack U021
Module with an 11-channel AS7341 sensor that allows the detection of light in various wavelength ranges (color detection). It is equipped with a Gravity connector and communicates via the I2C interface. DFRobot SEN0364
Module with light sensor - LS06-S phototransistor. The board is equipped with a Grove connector and has an analog output. Seeed Studio 101020132
Module with slot optical sensor TCUT1600X01. The board is equipped with a Grove connector and has two digital outputs. Seeed Studio 101020587
Module with light sensor - LS06-S phototransistor. The board is equipped with a Grove connector and has an analog output. Seeed Studio 101020173
Ambient light sensor with a wide measurement range from 0.045 lx to 188,000 lx and a 22-bit dynamic range. It communicates via the I2C bus, supports automatic range adjustment and works with systems using 3.3 V and 5 V logic. STEMMA QT / Qwiic connectors simplify solderless integration. Adafruit 6498