- -zł11.29
LilyPad RGB LED – sewn-in RGB LED module, diameter 20 mm
ID: 202432
5902186327092
zł19.90
zł8.61
Save zł11.29
Tax included
zł7.00 tax excl.
Lowest price 30 days:
zł19.90
The LilyPad RGB LED module is a thin, sewn-in fabric board with an RGB diode, which allows you to obtain different colors thanks to three independently controlled channels (R, G, B) and a common cathode. It is ideal for electronic clothing projects, working with microcontrollers and the LilyPad system, and after correct integration is resistant to washing. Sparkfun DEV-08467
Description
The LilyPad RGB LED module allows you to obtain a wide range of colors thanks to an integrated RGB LED with three independently controlled channels: red (R), green (G) and blue (B). Each color channel is connected to a separate tip adapted for sewing a conductive thread. The common cathode (GND) allows for simple integration with power supply systems. The LEDs are activated by applying a positive voltage to the appropriate R, G or B pins. When using a microcontroller, you can control the brightness of the channels using PWM signals.
The module is intended for use in electronic clothing projects, integrating with other elements of the LilyPad ecosystem. The board is characterized by a small thickness and large pads for sewing, which facilitates installation in textile materials.
Features
- Common cathode for all three color channels
- Three independent control channels: R, G, B
- Outer diameter: 20 mm
- PCB thickness: 0.8 mm
- Suitable for sewing into textiles
- Compatible with the LilyPad system
- Washproof after proper integration with the material
202432
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
The Flora budget starter kit contains everything you need to start an adventure with smart clothing. Included, among others motherboard, LED diodes, conductive cord, battery basket. Adafruit 1405
zł206.07
4 weeks
No product available!
Sewable with a 3-pin JST wiring adapter with 3 holes on the board perfect for conductive thread or soldering, wired to a single 3-pin JST-PH Adapter. Sdafruit 2566
zł12.96
4 weeks
No product available!
FLORA is Adafruit\'s fully-featured wearable electronics platform. It\'s a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects. Adafruit 659
Regular pricezł76.69zł66.26
24h
Available quantity: 1
Available
Available
Power module designed to work with LilyPad boards. It is equipped with a switch and a CR2032 battery socket. SparkFun DEV-13883
zł11.17
3 weeks
No product available!
Available
The LilyPad series module is designed for prototyping interactive e-textiles. It consists of a board with a SAMD11 microcontroller and a CR2032 battery socket, LEDs, a light sensor and a button. SparkFun DEV-14063
zł88.20
24h
Available quantity: 2
Available
GEMMA M0 is an intelligent clothing controller from Adafruit. In relation to the classic GEMMA board, it was equipped with a 32-bit ATSAMD21E18 microcontroller (based on Cortex M0 +). It has GPIO pins, RGB DotStar diode. The board can be powered by a 3.7 V Li-Ion battery (JST connector). Adafruit 3501
zł58.66
4 weeks
No product available!
Kit with LEDs, battery, needles and conductive thread that allows you to sew LED lighting into clothes. SparkFun DEV-11590
zł103.17
24h
Available quantity: 1
Available
XBee adapter with pads with holes for sewing the module to clothes and fabrics. SparkFun DEV-12921
zł84.89
24h
Available quantity: 1
Available
A miniature module with a LiPo battery charger with a capacity of 500 mA. SparkFun DEV-11893
zł58.40
3 weeks
No product available!
Button cell battery socket specially designed for e-textiles from Kitronik. It has large connection points that allow easy connection of the conductive thread. Dedicated to CR2032 batteries. Kitronik 2701
zł6.49
24h
Available quantity: 2
Available
Microcontroller board controlled by ATmega32U4 with Arduino bootloader. Due to its dimensions and holes, it will be excellent for electronic components sewn into clothing. It has a built-in JST connector with charging circuit and on/off switch and is programmable via micro USB. SparkFun DEV-14631
zł179.90
3 weeks
No product available!
Microcontroller board controlled by ATmega32U4 with Arduino bootloader. Due to the dimensions and openings, it is perfect for electronic components sewn into clothes. It has a built-in JST connector with a charging circuit and a switch and is programmed via a micro USB connector. SparkFun DEV-12049
zł139.00
3 weeks
No product available!
Slim 3V battery powered LEDs that are perfect for e-textile projects. With clearly marked connectors and double-sided PCB, these LEDs are easy to connect and highly durable, making them the perfect choice for interactive clothing, accessories and decorations that combine fashion with modern technology. Kitronik 2714
zł22.60
24h
Available quantity: 4
Available
Button cell battery holder specially designed for e-textiles from Kitronik. It has large connection points that allow easy connection of the conductive thread. Dedicated to CR2032 batteries. Kitronik 2711
zł8.78
24h
Available quantity: 5
Available
The LilyPad RGB LED module is a thin, sewn-in fabric board with an RGB diode, which allows you to obtain different colors thanks to three independently controlled channels (R, G, B) and a common cathode. It is ideal for electronic clothing projects, working with microcontrollers and the LilyPad system, and after correct integration is resistant to washing. Sparkfun DEV-08467