 
        
           
        
           
         
           
           
          Doppler radar module with a 24GHz transceiver, which allows for precise distance measurement, detection of the direction of movement and measurement of the speed of a moving object. The module uses the physical Doppler effect by analyzing the frequencies of the waves generated and received by the device. The board has an interface for connecting a programmer, so advanced users can adjust the operation of the radar to their own needs. The module communicates via the UART interface and is powered by 5 V. It will be used in projects related to security systems, and its operation is not affected by unfavorable factors such as high temperature, rain and dust accumulation. Full documentation of the module with examples of use is available on the product page.

Doppler radar works by sending a beam of electromagnetic radiation waves from a transmitter (TX antenna) at a precise frequency to a moving object. When the electromagnetic radiation wave comes into contact with the object, it returns towards the receiver (RX antenna). When the wave was reflected from a moving object, it now has a different frequency to the original it was emitting. A change in this frequency can be used to calculate the speed of a moving object.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Doppler radar module with 24GHz BGT24LTR11 transceiver. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 109020021
Module with STP201M motion sensor with pedometer function. Built on the basis of an accelerometer and MCU, dedicated to sports bands and smartwatches
HLK-LD2450 is a 24 GHz radar module designed for precise human presence and motion detection in intelligent IoT systems. modHLK-LD2405
 No product available!
Air speed sensor module based on the FS3000-1005 chip. The board is equipped with Qwiic connectors. SparkFun SEN-18377
Gravity: 360 Degree Hall Angle Sensor is a rotation angle sensor measuring a value in the range of 0-360 ° with an analogue output, powered by 5V. DFRobot SEN0221
The module with the BS312 PIR sensor, which allows motion detection at a distance from 3.2 to 12 m. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020793
A set for building a weather station equipped with a rainfall sensor and a wind speed and direction meter. SparkFun SEN-15901
PIR infrared sensor. Reacts to the change of infrared radiation. Range up to 7m.
The modPhotoelectric sensor with an LM393 comparator and a 10 mm slot width enables reliable detection of interrupters in applications requiring pulse counting, position detection, and speed measurement. Thanks to its digital TTL output and mounting holes, it is suitable for direct integration with microprocessor systems. modPhotoelectric
 No product available!
Module designed for the XIAO development platform. It acts as an advanced human presence sensor, using FMCW technology to detect human targets in a specific space. The module offers a maximum detection distance of up to 5 meters and a wide detection angle of ±60°. Seeed Studio 101010001
 No product available!
Motion detection module featuring Panasonic\'s EKM series PIR sensor. The EKM series is optimised for detecting small movements and is ideal for detecting movement in a small area around the sensor. It offers digital output in 32 zones with a detection distance of 5 m and a detection area of 90° x 90°. SparkFun SEN-22000
Module with a PIR motion sensor. It allows you to detect movement at a distance of up to 8 meters with a viewing angle of 60°. DFRobot SEN0522
Module with PIR EKMB1107112 motion sensor, power consumption in standby mode up to 1 uA. The board communicates via I2C and is equipped with a Qwiic connector. SparkFun SEN-17375
Energy-saving 24 GHz sensor LD2410S based on FMCW technology and the Doppler effect, designed to detect human presence and micro-movements in real time. Thanks to the built-in AI algorithm and a range of up to 8 meters and a wide detection angle (±60°), it is perfect for building automation, smart lighting and IoT devices. It supports UART and GPIO interfaces, offers very low power consumption (from 0.04 mA in standby mode) and allows configuration through intuitive tools, making it ideal for integration in modern projects.
 No product available!
Module with a gesture sensor PAJ7620U2, which allows to recognize up to 13 gestures. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020083
 No product available!
Module with vibration sensor LDT0-028. The board is equipped with a Grove connector and has a digital output. Seeed Studio 101020031
 
                    Doppler radar module with 24GHz transceiver. It allows for precise distance measurement and motion detection. The board communicates via the UART interface. Seeed Studio 101990883