- -zł14.88
zł57.00 tax excl.
Pmod PIR is a module with a PIR motion sensor (EKMC1601111), which allows you to detect motion up to 5 meters from the module. The sensor during operation is characterized by low power consumption. Digilent 410-389
Pmod PIR is a module with a PIR motion sensor (EKMC1601111), which allows you to detect motion up to 5 meters from the module. The sensor during operation is characterized by low power consumption.
Manufacturer
Responsible person
The PIR motion sensor module modHC-SR501 is a universal sensor ideal for detecting the presence of people or animals, compatible with Arduino, Raspberry Pi and home automation systems. modHC-SR501
This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. This unit works great from 5 to 12V (datasheet shows 12V). You can also install a jumper wire past the 5V regulator on board to make this unit work at 3.3V. Sensor uses [email protected]. SEN-13285
A small module with a PIR motion sensor. It allows detecting movement within a maximum range of 6 meters (default up to 3 meters). The measuring angle is 120 degrees. The module has a connector in accordance with the Grove standard. Seeed Studio 101020020
Module with a PIR motion sensor designed for M5Stack modules. It can detect movement up to 5 meters with a detection angle of 100 degrees. M5Stack U004
Finder 18.31.8.230.0031 is a PIR sensor for flush mounting, controlling a single NO contact rated at 10 A at 230 V AC. Ideal for automatic indoor lighting control, it is mounted in suspended ceilings and ensures reliable and safe operation.
The MR60BHA2 sensor kit uses 60GHz mmWave technology to reliably detect human presence, as well as human breathing and heartbeat detection. It offers Home Assistant integration thanks to the XIAO ESP32C6 module and pre-installed ESPHome firmware. Equipped with a BH1750 light intensity sensor, RGB LED indicator and the possibility of expanding with Grove sensor modules, it is ideal for monitoring health, safety and home automation. Seeed Studio 114993387
No product available!
The MR60FDA2 sensor kit uses 60GHz mmWave technology to reliably detect falls and people. It offers Home Assistant integration thanks to the XIAO ESP32C6 module and pre-installed ESPHome firmware. Equipped with a BH1750 light intensity sensor, RGB LED indicator and the possibility of expanding with Grove sensors, it is ideal for monitoring health, safety and home automation. Seeed Studio 114993388
Wind direction sensor with a 0–360° measurement range and an RS485 interface supporting the Modbus RTU protocol. Provides wind direction readings in degrees or as one of 8 or 16 directions, with a response time of up to 0.5s. Features power consumption not exceeding 0.15W and configurable communication parameters. Equipped with a rotating wind vane, a polycarbonate composite housing and an 80mm diameter mounting base. Designed for weather stations, environmental monitoring and industrial automation systems.
Wind speed sensor 0-70 m/s made of durable polycarbonate, offers high accuracy and fast response time. It is equipped with RS485 interface. Suitable for agricultural, meteorological and industrial applications. The set includes a sensor, cable and mounting kit.
No product available!
The modPhotoelectric sensor with an LM393 comparator and a 10 mm slot width enables reliable detection of interrupters in applications requiring pulse counting, position detection, and speed measurement. Thanks to its digital TTL output and mounting holes, it is suitable for direct integration with microprocessor systems. modPhotoelectric
A modern module that enables gesture control and detects the presence of people, ensuring privacy and fast offline interactions. Equipped with a camera and an AI processor, the sensor recognizes 5 hand gestures and detects up to 10 faces within a range of 3 meters, supporting I2C and UART communication, making it an ideal solution for IoT, smart homes and touchless systems. DFRobot SEN0626
Advanced 60 GHz radar, capable of detecting human presence, falls, posture and vital signs such as heart rate and breathing – even when motionless. Ceiling-mounted and compatible with platforms such as Arduino or ESP32, it is ideal for healthcare systems, especially for monitoring sleep and the safety of the elderly. DFRobot SEN0623
The Gravity Occupancy Sensor uses 24 GHz FMCW radar technology, enabling precise presence detection at a distance of up to 8 meters and movement and distance measurement up to 12 meters. Thanks to its high resistance to environmental interference, it works reliably regardless of light, temperature or dust, effectively detecting both static and dynamic objects. Compatibility with Arduino, ESP32, Raspberry Pi and a simple Gravity interface make it an ideal solution for intelligent lighting, building automation and security systems. DFRobot SEN0610
Occupancy sensor based on 24 GHz millimeter wave technology with FMCW, enabling precise detection of people, measuring distances up to 25 m and movement speed. Thanks to high resistance to environmental interference, it works reliably in conditions such as dust, light or temperature changes, outperforming traditional PIR and ultrasonic sensors. Compact size and installation flexibility make it perfect for intelligent lighting, security systems and building automation. DFRobot SEN0609
A 24 GHz FMCW radar with Wi-Fi 802.11b/g/n and Bluetooth 5.0 BLE support, enabling precise detection of motion and human presence. Equipped with an integrated detection algorithm and a RISC processor with SPI, UART, I²C, PWM, and GPIO interfaces, it provides flexible configuration and reliable communication in IoT systems. With a wide operating temperature range (-40°C to +85°C), a built-in radar antenna, and WPA3 support, the module is ideal for smart homes, building automation, and security systems.
A passive infrared motion sensor designed for Tiny FX projects and interactive installations. It detects motion within a 3-5m range and generates a simple 3.3V digital signal, ideal for triggering lighting effects and animations. Adjustable sensitivity, a wide viewing angle, and very low current draw make it ideal for battery-powered projects. The module is completely ready to use and can be connected without soldering using a JST-SH connector. Pimoroni PIM749
Crowtail-PIR Motion Sensor 2.0 is a digital motion sensor for use in alarm systems, building automation and interactive projects. It provides a wide detection angle and adjustable range in a compact form with easy connection through the Crowtail interface.
Crowtail-Microwave Sensor 2.0 is a motion sensor module based on the Doppler effect, designed for integration with Arduino and Crowduino platforms. Thanks to its resistance to environmental factors, it is suitable for industrial automation, security systems and smart installations.
Crowtail-Mini PIR Motion Sensor 2.0 is a miniature digital PIR sensor with a built-in DSP and RFI filter, intended for motion detection in compact systems. It is used in alarms, lighting control and robotics.
Infrared sensor module for presence and motion detection based on the STHS34PF80, featuring an I2C interface and STEMMA QT / Qwiic connectors, capable of detecting objects up to 4 m without a lens. Adafruit 6426
Pmod PIR is a module with a PIR motion sensor (EKMC1601111), which allows you to detect motion up to 5 meters from the module. The sensor during operation is characterized by low power consumption. Digilent 410-389