Handbag for Micsig oscilloscopes

Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP1502

Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 100 MHz and the ability to measure voltage up to 700 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP700

Compact oscilloscope with 2.8” HD screen, 10 MHz bandwidth and 48 MSa/s sampling, ideal for diagnostics and education. It offers AUTO mode, various trigger modes and a signal generator function up to 50 kHz. Built-in 1000 mAh battery provides up to 4 hours of mobile operation. Fnirsi DSO510

BNC connector cable (adapter) for minigrabber clips. It enables the connection of the tested system with an oscilloscope

High-voltage differential probe. It has good measurement characteristics: a bandwidth of 100 MHz and an operating voltage of up to 1300 V. The probe has two attenuation coefficients: 50X and 500X. Hantek HT8100

Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is ideal for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP12000XS

A digital-analog oscilloscope that allows users to measure, visualize, generate, record and control various types of circuits. It has two analog outputs (with a bandwidth of 50 MHz and 14-bit resolution), one analog output and 16 outputs/outputs. The device is equipped with BNC equipment and a solid aluminum housing. Digilent 410-417

The probe tip has a 50X attenuation factor. Designed for Micsig probes from the SigOFIT series operating in the 100MHz, 200MHz and 350MHz frequency band. Micsig OP50-3

A 2-in-1 device that combines a digital oscilloscope with an LCR tester. It allows oscilloscope measurements and testing of electronic components, including diodes and transistors. Fnirsi DSO-TC2 Standard

Micsig DP series differential probe based on advanced SigOFIT technology. It offers a 500 MHz frequency band and the ability to measure voltages up to 700 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP705

4-channel digital oscilloscope with a built-in 16-channel logic analyzer and signal generator. It offers a frequency band of 100 MHz and sampling rates of up to 1 GS/s. It can work with Windows devices. Hantek DSO3104A

4-channel digital oscilloscope with a built-in 16-channel logic analyzer and signal generator. It offers a frequency band of 250 MHz and sampling rates of up to 1 GS/s. It can work with Windows devices. Hantek DSO3254A

Digital oscilloscope with compact dimensions. It offers a frequency bandwidth of 200 kHz and a sampling rate of 2.5 MS/s. Equipped with a 2.8" colour display with a resolution of 320x240 pixels. Fnirsi DSO152 set

A probe for measuring AC and DC currents up to 650 A. It operates in a bandwidth of up to 400 Hz and can be connected to an oscilloscope via a BNC connector. Hantek CC-650

4-channel digital oscilloscope connected to a computer. It offers a frequency band of 60 MHz and sampling up to 200 MS/s. It can work with Windows devices. Hantek DSO3064

Oscilloscope probe designed to analyze signals generated by the ignition coil in car engines. It is compatible with most digital oscilloscopes. Hantek HT25COP