New products
New products
€16.39
24h
Available
€16.63
24h
Available
€16.39
24h
Available
Available
€19.04
24h
Available
€16.39
24h
Available
€16.63
24h
Available
€16.39
24h
Available
Available
€19.04
24h
Available
I2C to Dual UART Module - I2C - 2x UART converter
ID: 581467
5906623406333
€8.80
Tax included
€7.16 tax excl.
I2C-UART converter module with two UART output interfaces. Configuration of I2C addresses allows you to connect up to 4 such modules to one controller, which means extending the board's capabilities by 8 UART interfaces. DFRobot DFR0627
Description
I2C-UART converter module with two UART output interfaces. Each UART has an independent 256-byte FIFO hardware buffer for sending and receiving. The module provides a maximum communication speed of 2 Mb/s. Configuration of I2C addresses allows you to connect up to 4 such modules to one controller, which means extending the board's capabilities by 8 UART interfaces. The module is compatible with Arduino, Raspberry Pi, micro:bit.
A detailed description of the module and examples of use are available on the product Wiki page.
Features
- Input port: Gravity 4-pin I2C
- Output ports: 2x UART
- Communication speed up to 2 Mb/s
- Possibility to extend up to 8 UART interfaces
- Independent data sending / receiving for each UART interface
- Independent settings for communication speed and frame length for each UART interface
- Supply voltage: from 3.3 V to 5.5 V
- Working current: up to 3 mA
- Working temperature: -40°C to 85°C
- Dimensions: 32.5 x 27 mm
Kit contains
- I2C - 2x UART converter module
- Gravity-4P I2C/UART 4-pin cable
581467
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cables for evaluation boards, set of 10 pcs., blue colour
€1.25 24hAvailable quantity: 273 AvailableCables for evaluation boards, set of 10 pcs., red colour
€1.25 24hAvailable quantity: 298 AvailableCables for evaluation boards, set of 10 pcs., green colour
€1.32 24hAvailable quantity: 58 AvailableCables for evaluation boards, set of 10 pcs., yellow colour
€1.35 24hAvailable quantity: 63 AvailableCables for evaluation boards, set of 10 pcs., white colour
€1.46 24hAvailable quantity: 17 AvailableA set of 10 pieces of female-female connecting cables with a length of 21 cm. CAB_F-F (BK-10-25)
€1.57 24hAvailable quantity: 85 AvailableA set of 10 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-10-17)
€1.18 24hAvailable quantity: 5 Available
Other products in the same category (16)
The power module is designed for the MyoWare 2.0 muscle tension sensor. Equipped with a LiPo battery, it allows you to build portable devices. SparkFun DEV-18427
€24.63 24hAvailable quantity: 2 AvailableStep-Down converter with adjustable output voltage from 1.25 to 36 V, input voltage from 4 to 38 V and maximum current up to 5 A. Board equipped with a voltmeter with display
€4.51 6 weeks No product available!
DC-AC converter, also referred to as an inverter. It converts a constant voltage (DC) of 12 V to an alternating voltage (AC) of 110 V, 200 V, 220 V or 280 V
€8.34 6 weeks No product available!
An efficient step-down converter that reduces the input voltage to 5 V at a maximum current of 100 mA, offering high efficiency due to low quiescent current (<20 μA). It supports input voltage from 5 V to 65 V, has a Power Good (PGOOD) function, an EN input for system shutdown, and short circuit and overheat protection, making it a reliable and energy-efficient solution. Pololu 5373
€4.71 6 weeks No product available!
The Step-Up converter module converts the voltage in the range of 3.5-30V to 4-30V with an efficiency of over 90% and a maximum power of 80W. Its compact dimensions (3.8 x 5.2 x 2cm) and wide operating temperature range (-40 - 85°C) make it ideal for many applications.
€2.36 6 weeks No product available!
The Step-Down D24V3F12 Buck Voltage Regulator module gives the output voltage of 12V with a wide input voltage range of 14.5-42V and a maximum output current of 300 mA. Pololu 2100
€8.02 6 weeks No product available!
The compact (0.4″ × 0.5″) D24V5F12 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V while allowing for a maximum output current of 500 mA.
€6.60 24hAvailable quantity: 3 AvailableModule with the HUSB238 chip, which allows for flexible configuration of the voltage and current supplied through the USB PD port. It allows both manual setting of parameters using jumpers and dynamic control via the I2C bus. Equipped with a USB Type C connector. Adafruit 5807
€7.44 24hAvailable quantity: 6 AvailableDC-DC Step-Up/Step-Down Converter Module. It has an input voltage of 1.4 to 16 V, an output voltage of 5 V and a maximum output current of 1 A to 1.5 A. Pololu 4965
€7.13 24hAvailable quantity: 5 AvailableStep-Down DC-DC converter module based on the D24V150F12 chip. Input voltage 14.5 ... 40V, output voltage 12V (max 15A). Pololu 2885
€120.49 24hAvailable quantity: 1 AvailableSafety system for two Li-Ion cells with 11.1V. The module has the function of charging cells with the balancer, discharging and the function of protecting the cells against discharge. Cells can be charged with continuous current up to 20A and discharged with current 40A. modBMS40A
€6.59 6 weeks No product available!
Step-up DC-DC converter module, 0.9-5V input voltage, 5V output voltage (max. 600 mA) connected to the USB socket. There is a diode on the board indicating the power connection. modPS
€1.80 24hAvailable quantity: 15 AvailablePololu 5V Step-Up Voltage Regulator U1V10F5
€6.66 24hAvailable quantity: 2 AvailableThis synchronous switching step-down (or buck) regulator takes an input voltage of up to 40V and efficiently reduces it to 5V with an available output current of around 15A. Typical efficiencies of 80% to 95% along with its high current capabilities make this regulator well suited for powering large loads. Pololu 2881
€110.62 24hAvailable quantity: 1 AvailableWaterproof DC-DC Step-Down Converter with 8 to 22V input voltage and 5V 3A USB output
€5.40 6 weeks No product available!
Step-Down converter with adjustable or constant output voltage from 0.8 to 17 V, input voltage from 4.5 to 24 V and a maximum current of up to 3 A
€0.96 24hAvailable quantity: 149 Available
I2C-UART converter module with two UART output interfaces. Configuration of I2C addresses allows you to connect up to 4 such modules to one controller, which means extending the board's capabilities by 8 UART interfaces. DFRobot DFR0627