Converter Module 5V Step-Down 100mA D45V1E2F5
ID: 1196556
zł23.43
Tax included
zł19.05 tax excl.
An efficient step-down converter that reduces the input voltage to 5 V at a maximum current of 100 mA, offering high efficiency due to low quiescent current (<20 μA). It supports input voltage from 5 V to 65 V, has a Power Good (PGOOD) function, an EN input for system shutdown, and short circuit and overheat protection, making it a reliable and energy-efficient solution. Pololu 5373
Description
The D45V1Ex module is a high-efficiency buck (step-down) voltage regulator that lowers the input voltage to 5 V with a maximum output current of 100 mA. It is a switching regulator (SMPS) characterized by an extremely low quiescent current (below 20 μA), ensuring high efficiency even under light loads. This makes it more energy-efficient than traditional linear regulators. The regulator supports an input voltage range of 5 V to 65 V, with the minimum voltage depending on the voltage drop at a given load. The device features a Power Good (PGOOD) function, which signals correct output voltage, and an EN input that allows the circuit to be disabled, entering a low-power mode (approximately 5 μA in sleep mode). Additionally, a low-voltage threshold can be set using an external resistor. The module is equipped with short-circuit and over-temperature protection, ensuring high reliability. Its compact size facilitates integration into various electronic projects.
Pinout Description
- PGOOD - Open-drain output that goes low when the output voltage drops below 87% of the nominal value.
- EN - The regulator is enabled by default. Setting the EN pin low turns off the power supply and puts the module into low-power mode.
- VIN - Power input
- GND - Ground
- VOUT - Output
Features
- Input voltage: 5 V to 65 V
- Output voltage: 5 V ±4%
- Maximum output current: 100 mA
- Low quiescent current: < 20 μA
- High efficiency even at low loads
- Power Good (PGOOD) function for voltage monitoring
- EN input for enabling/disabling the module
- Short-circuit and over-temperature protection
- Dimensions: 12.7 x 15.3 x 3 mm
- Weight: 0.7 g
Regulator Parameters
1196556
Data sheet
- Output voltage
- 5th
- Output current
- 100 mA
- Converter type
- Step-down
- Supply voltage min
- 5 V
- Supply voltages max
- 65 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 5399
Available
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
24h
Available quantity: 197
Available
Cables for evaluation boards, set of 10 pcs., red colour
zł5.20
24h
Available quantity: 233
Available
Cables for evaluation boards, set of 10 pcs., green colour
zł5.46
24h
Available quantity: 347
Available
Pin header goldpin black 1x40 pins. Angled connector for through-hole assembly. 2.54mm pitch.
zł1.23
24h
Available quantity: 19249
Available
Other products in the same category (16)
An efficient step-down converter that reduces the input voltage to 3.3 V at a maximum current of 100 mA, offering high efficiency due to low quiescent current (<20 μA). It supports input voltages from 3.3 V to 65 V, has a Power Good (PGOOD) function, an EN input for system shutdown, and short circuit and overheat protection, making it a reliable and energy-efficient solution. Pololu 5372
zł23.43
4 weeks
No product available!
Step-Down converter D36V28F12 with an output voltage of 12 V, an input voltage from 12.9 to 50 V and a maximum output current of 3.3 A. Pololu 3786
zł81.91
24h
Available quantity: 2
Available
The compact (0.4″ × 0.5″) D24V5F6 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 6 V while allowing for a maximum output current of 500 mA. Pololu 2844
zł34.02
24h
Available quantity: 2
Available
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 3.3 V with an available output current of around 15 A. Pololu 2880
zł465.09
4 weeks
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 9 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.
zł86.59
4 weeks
No product available!
Step-Down converter with an output voltage of 5 V, an input voltage of 7 to 26 V and a maximum current of 3 A
zł6.58
24h
Available quantity: 298
Available
This small synchronous switching step-down (or buck) regulator takes an input voltage from 4 V to 36 V and efficiently reduces it to 3.3 V. The board measures only 0.7″ × 0.7″ yet delivers a typical continuous output current of up to 2.6 A and features reverse voltage protection.
zł82.07
24h
Available quantity: 2
Available
Step-Down DC-DC converter module based on the D36V6F12 system. Input voltage 12.2.50V, output voltage 12V (max. 600mA). Pololu 3796
zł21.44
24h
Available quantity: 5
Available
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 6 V with an available output current of around 15 A. Pololu 2882
zł466.10
4 weeks
No product available!
This compact switching step-down voltage regulator. It has an output voltage range of 4 V to 25 V and a maximum output current of 600 mA. Pololu 3799
zł35.85
24h
Available quantity: 1
Available
This compact (0.4″ × 0.5″) switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 7.5 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output.
zł26.40
24h
Available quantity: 1
Available
Step-Down XL4015 converter module with adjustable output voltage in the range from 1.25 to 36 V with a wide input voltage range from 4 to 38 V and a maximum output current of 5 A
zł9.73
24h
Available quantity: 42
Available
The compact (0.4″ × 0.5″) D24V5F12 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V while allowing for a maximum output current of 500 mA.
zł34.02
24h
Available quantity: 2
Available
Step-Down converter module with input voltage from 4.75 to 23V, output voltage from 1 to 17V and output current 1.8 A (3 A instantaneous current).
zł7.70
24h
Available quantity: 44
Available
No product available!
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.8″, but it allows a typical continuous output current of up to 5 A. Typical efficiencies of 85% to 95% make this regulator well suited for high-power applications like powering motors or servos.
zł116.75
24h
Available quantity: 6
Available
An efficient step-down converter that reduces the input voltage to 5 V at a maximum current of 100 mA, offering high efficiency due to low quiescent current (<20 μA). It supports input voltage from 5 V to 65 V, has a Power Good (PGOOD) function, an EN input for system shutdown, and short circuit and overheat protection, making it a reliable and energy-efficient solution. Pololu 5373