- Out-of-Stock
OIP500B - Isolated fibre optic probe for Micsig oscilloscopes
ID: 1184404
Insulated fibre-optic probe with a measurement range of up to 1250 V. Operates in a bandwidth of up to 500 MHz and can be connected to an oscilloscope via a BNC connector. Battery-powered. Micsig OIP500B
Description
Isolated fibre optic probe with a measurement range of up to 1250 V. It uses a standard BNC interface and can be connected to an oscilloscope or multimeter. It operates in the frequency band up to 500 MHz. The probe can operate with manual or automatic adjustment and is battery powered. It uses SigOFIT optical isolation technology, so it offers high accuracy and perfectly suppresses oscillations caused by high-frequency common noise. It will find use in industry, automotive electronics, power supplies and inverter operation. Dedicated to Micsig brand devices.
Features
- Bandwidth: 500 MHz
- Rise time: 700 ps
- Effective accuracy for 300 MHz bandwidth
- Output voltage: ±1,25V
- Measuring ranges:
- 1X: ±1.25V
- 10X: ±12,5V
- 20X: ±25V
- 500X: ±625V
- 1000X: ±1250V
- Noise: <1.41mVrms
- Signal delay: ＜15.42 ns
- DC gain accuracy: 1%
- Common mode voltage range: 60kVpk
- Power supply: battery powered (DC 5 V charging, USB type C)
- Cable length: 2 m
1184404
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Protective handbag designed for Micsig oscilloscopes of the TO, ATO and STO series.
zł159.86
24h
Available quantity: 2
Available
Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 100 MHz and the ability to measure voltage up to 700 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP700
zł1,195.19
Delivery date unknown
No product available!
The Micsig SATO2002 is a dual-channel tablet oscilloscope with a 200 MHz bandwidth, offering a maximum sampling rate of 1 GSa/s and a memory depth of 70 Mpts. Equipped with an 8-inch touchscreen LCD, it simplifies automotive diagnostics, including testing charging systems, ignition, and CAN and LIN networks
zł3,398.93
24h
Available quantity: 1
Available
Other products in the same category (16)
Decoder dedicated to receive digital terrestrial TV programs in the DVB-T2 H.265 standard. Equipped with HDMI, SCART, RF, USB and WiFi communication. BLOW 4815FHD
Retired
No product available!
10DOF module, nine-axis attitude the instrument L3G4200D, ADXL345, HMC5883L and BMP085 , RoHS
Retired
No product available!
Wires with Pre-crimped Terminals 50-Piece Rainbow Assortment M-F 3"
Retired
No product available!
Kaczorek T., Dzieliński A., Dąbrowski W., Łopatka R.
Delivery date unknown
No product available!
BB Black Expansion CAPE, Features RS485 and CAN Interfaces
Retired
No product available!
No product available!
4.3-inch capacitive screen with a resolution of 480 x 272 pixels, ideal for touch applications. It features an I2C interface, low power consumption, and a wide operating temperature range. NXP
Retired
No product available!
Female terminal block, 4-pin. Pitch 3.5mm. Height 15.6mm. KF2EDGK
Retired
No product available!
DIGITAL MAGNETOPHONE WITH ISD17180 SYSTEM - A KIT FOR INDEPENDENT INSTALLATION
Retired
No product available!
No product available!
PCB board and programmed circuit for an 8-channel thermometer -55 ° C ... + 125 ° C with alarm. AVT5489 A +
Retired
No product available!
No product available!
Matrix display module with Raspberry Pi Pico W control board. It has built-in 583 RGB LEDs in a 53 x 11 layout, an amplifier with speaker and buttons. Ideal for building a clock, displaying sensor data or presenting weather data. Pimoroni PIM631
Retired
No product available!
No product available!
Programmable, linear laboratory power supply with adjustable supply voltage up to 30V and current up to 5A. The power supply has two 30V/5A output channels and one 5V/3A channel. Equipped with a USB and RS-232 interface. Uni-T UTP3305C
Retired
No product available!
No product available!
Insulated fibre-optic probe with a measurement range of up to 1250 V. Operates in a bandwidth of up to 500 MHz and can be connected to an oscilloscope via a BNC connector. Battery-powered. Micsig OIP500B