- Out-of-Stock

MY-ZB010C-P UART to ZigBee Module
The MY-ZB010C is an industrial UART to ZigBee module designed by MYIR for applications which require low cost, low power, high reliability and far distance wireless communication network. It is a ZigBee/IEEE 802.15.4 compliant solution operating within the 2.4GHz ISM band. The module offers AT command line to configure parameters and implement point-to-point, peer-to-peer, point-to-multipoint, and mesh network topologies. It also has fixed time AD acquisition, IO acquisition, IO level pass-through control, PWM output and more other functions to make it an ideal communication module for applied fields like smart home, smart energy, remote monitoring, medical monitoring, warehouse environment monitoring and building automation.
The MY-ZB010C UART to ZigBee Module is available in two models: MY-ZB010C-S and MY-ZB010C-P. The MY-ZB010C-S is a standard power module with 2.5dBm transmit power, -95dBm receiving sensitivity and integral antenna. The MY-ZB010C-P is a high power module with 22dBm transmit power, -100dBm receiving sensitivity and UFL antenna interface. User can make selection according to their application requirements.
![]() |
MY-ZB010C-S ZigBee Module |
![]() |
MY-ZB010C-P ZigBee Module |
The MY-ZB010C ZigBee module is small in size and easily for customers to embed it into their products to add powerful network capabilities. MYIR also offers ZigBee module custom design services covering below contents:
Features
Item | MY-ZB010C-S | MY-ZB010C-P | |
Network Protocol | IEEE 802.15.4 ZigBee Pro (ZigBee 2007) | ||
Frequency Channel | ISM 2.4GHz band, Channel 11-26 | ||
Network Topologies | Peer-to-peer, point-to-multipoint, Mesh | ||
Over-the-air data rate | 250Kbps | ||
Actual usable data rate | 29.6Kbps | ||
Transmit Power | 2.5dBm | 22dBm | |
Receiver Sensitivity | -95dBm | -100dBm | |
Antenna | Integral antenna | uFl connector | |
UART Interface | Baud rate: 4800, 9600, 19200, 38400, 76800, 115200 Data bit: 5, 6, 7, 8 Parity bit: none, odd, even Stop bit: 1, 2 Flow control: none, hardware Voltage: 3.3V, TTL | ||
Footprint | Stamp hole | ||
Recommended voltage | DC 3.3V | ||
Operating voltage | 2.0V ~ 3.6V | ||
Current | Operating Current (Transmit) | 15.3mA | 175mA |
Operating Current (Receive) | 17mA | 22mA | |
Power-down Current | 8mA | 10mA | |
AD | Accuracy | 10 bit | |
Reference voltage | DC 2.47V | ||
Input voltage range | 0V ~ 2.47V | ||
PWM | Output Maximum Frequency | 10KHz | |
Output Minimum Frequency | 5Hz | ||
Temperature | Operating Temp. | -40°C to +85°C. | |
Storage Temp. | -40°C to +125°C. | ||
Soldering Temp. | 280°C to +320°C. | ||
Dimensions | 30mm (L) x 16mm (W) x 3mm (W) | ||
Weight | About 3g |
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Rod antenna 2.4G, gain 5dBi, connector type: IPEX/U.FL, RoHS
Flexible GNSS antenna with u.FL connector attached with self-adhesive tape. Compatible with GPS, Galileo, BeiDou and GLONASS systems. SparkFun GPS-15246
No product available!
No product available!
No product available!
Needle bending needle, for precise glue application, Flux 0,21mm internal diameter and 1.26mm outside diameter
No product available!
No product available!
Tamiya 70106 4-Channel Remote Control Box
No product available!
Printed circuit board and programmed solar collector differential controller. AVT5621 A +
No product available!
The Teensy Prop Shield is meant for making interactive light and sound effects on small, handheld props and wearable costumes. Features 10DoF (Degrees of Freedom) motion sensors, 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, 8MB flash memory. DEV-13995
No product available!
No product available!
Module with a 12-channel capacitive touch sensor MPR121 in a set with 4 touch probes. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020047
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
The set consists of STM32 Nucleo NUCLEO-F302R8 plate with STM32F302R8 microcontroller, X-NUCLEO-IHM07M1 plate with BLDC L6230 three-phase motor controller and BR2804-1700kV engine
No product available!
No product available!
MY-ZB010C-P UART to ZigBee Module, MYIR