- Out-of-Stock
2.7" E-Ink e-Paper Display with SPI HAT for Raspberry Pi - Waveshare 13357
ID: 569473
264x176, 2.7inch E-Ink display HAT for Raspberry Pi, three-color, SPI interface
Overview
This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Features
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Compatible with Raspberry Pi 2B/3B/Zero/Zero W
- Onboard 4x Keys
- SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications
- Operating voltage: 3.3V
- Interface: 3-wire SPI, 4-wire SPI
- Outline dimension: 85mm × 56mm
- Display size: 57.288mm × 38.192mm
- Dot pitch: 0.217 × 0.217
- Resolution: 264 × 176
- Display color: red, black, white
- Grey level: 2
- Full refresh time: 15s
- Refresh power: 26.4mW(typ.)
- Standby power: <0.017mW
- Viewing angle: >170°
Interface
| SYMBOL | DESCRIPTION |
|---|---|
| VCC | 3.3V |
| GND | Ground |
| DIN | SPI MOSI pin |
| CLK | SPI SCK pin |
| CS | SPI chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | External reset, low active |
| BUSY | Busy status output, low active |
Selection Guide
| Part Number | Colors | Grey Level | Resolution | Display size (mm) | Outline Dimension (mm) | Full Refresh Time (s) | Partial Refresh Time (s) | Interface | Pi Header1 |
|---|---|---|---|---|---|---|---|---|---|
| 1.54inch e-Paper Module | black, white | 2 | 200x200 | 27.60 × 27.60 | 48.0 × 33.0 | 2 | 0.3 | SPI | × |
| 1.54inch e-Paper Module (B) | red, black, white | 2 | 200x200 | 27.60 × 27.60 | 48.0 × 33.0 | 8 | N/A | SPI | × |
| 1.54inch e-Paper Module (C) | yellow, black, white | 2 | 152x152 | 27.51 × 27.51 | 48.0 × 33.0 | 27 | N/A | SPI | × |
| 2.13inch e-Paper HAT | black, white | 2 | 250x122 | 48.55 × 23.71 | 65.0 × 30.2 | 2 | 0.3 | SPI | √ |
| 2.13inch e-Paper HAT (B) | red, black, white | 2 | 212x104 | 48.55 × 23.71 | 65.0 × 30.2 | 15 | N/A | SPI | √ |
| 2.13inch e-Paper HAT (C) | yellow, black, white | 2 | 212x104 | 48.55 × 23.71 | 65.0 × 30.2 | 15 | N/A | SPI | √ |
| 2.7inch e-Paper HAT | black, white | 2 | 264x176 | 57.29 × 38.19 | 85.0 × 56.0 | 6 | N/A | SPI | √ |
| 2.7inch e-Paper HAT (B) | red, black, white | 2 | 264x176 | 57.29 × 38.19 | 85.0 × 56.0 | 15 | N/A | SPI | √ |
| 2.9inch e-Paper Module | black, white | 2 | 296x128 | 66.89 × 29.05 | 89.5 × 38.0 | 2 | 0.3 | SPI | × |
| 2.9inch e-Paper Module (B) | red, black, white | 2 | 296x128 | 66.89 × 29.05 | 89.5 × 38.0 | 15 | N/A | SPI | × |
| 2.9inch e-Paper Module (C) | yellow, black, white | 2 | 296x128 | 66.89 × 29.05 | 89.5 × 38.0 | 15 | N/A | SPI | × |
| 4.2inch e-Paper Module | black, white | 2 | 400x300 | 84.80 × 63.60 | 103.0 × 78.5 | 4 | N/A | SPI | × |
| 4.2inch e-Paper Module (B) | red, black, white | 2 | 400x300 | 84.80 × 63.60 | 103.0 × 78.5 | 15 | N/A | SPI | × |
| 4.2inch e-Paper Module (C) | yellow, black, white | 2 | 400x300 | 84.80 × 63.60 | 103.0 × 78.5 | 15 | N/A | SPI | × |
| 4.3inch e-Paper UART Module | black, white | 4 | 800x600 | 88.00 × 66.00 | 118.0 × 75.0 | 1.5 | N/A | UART | × |
| 7.5inch e-Paper HAT | black, white | 2 | 640x384 | 163.20 × 97.92 | 170.2 × 111.2 | 6 | N/A | SPI | √ |
| 7.5inch e-Paper HAT (B) | red, black, white | 2 | 640x384 | 163.20 × 97.92 | 170.2 × 111.2 | 31 | N/A | SPI | √ |
| 7.5inch e-Paper HAT (C) | yellow, black, white | 2 | 640x384 | 163.20 × 97.92 | 170.2 × 111.2 | 31 | N/A | SPI | √ |
- Standard Raspberry Pi header on module, allowed to be attached onto Pi directly, compatible with Raspberry Pi 2B/3B/Zero/Zero W
Package content
Weight: 0.036 kg
- 2.7inch e-Paper HAT (B) x1
- RPi screws pack (2pcs) x2
- PH2.0 20cm 8Pin x1
569473
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 2,7
- Resolution
- 264 x 176 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
E-Ink display module with a resolution of 400x300 pixels and a diagonal of 4.2 inches. The display has a built-in controller, communication takes place via the SPI interface. Waveshare 4.2inch e-Paper Module
zł146.94
Delivery date unknown
No product available!
400x300, 4.2inch E-Ink raw display
zł80.23
Delivery date unknown
No product available!
The Raspberry Pi 3 Model B+ is boasting a 64-bit quad core processor BCM2837B0 running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT
zł189.00
24h
Available quantity: 43
Available
Module with e-Paper display, 2.7" diagonal and 264x176 px resolution. Communication via SPI interface. Waveshare 2.7inch e-Paper HAT
zł89.83
24h
Available quantity: 1
Available
Other products in the same category (16)
Dustyn Roberts
Delivery date unknown
No product available!
Atmel SMART SAM V71 Xplained Ultra development kit with ATSAMV71Q21 microcontroller with ARM Cortex-M7 core. ATSAMV71-XULT
Retired
No product available!
No product available!
No product available!
The module with the 74LVC245AD system allows connecting systems with different supply voltages. Bi-directional operation mode allows you to change the output to the input using a jumper or DIR input, without the need to disconnect the system. MOD-12.Z
Retired
No product available!
MOD-13.Z is a module that allows you to safely and conveniently attach a microSD card to a project with an SPI interface. It has a built-in 74HC125 buffer. MOD-13
Retired
No product available!
The SOIC adapter is used for testing circuits in SMD enclosures. The place for the stabilizer enables the selection of the supply voltage, as well as the supply of additional modules. The module is equipped with a filtering capacitor and space for a polymer fuse. MOD-14.Z
Retired
No product available!
MOD-16.Z replaces the two-button regulation (more - less) with the rotary switch whose state at the given output depends on the direction of rotation. The module has a button in the encoder and a built-in Attiny13 microcontroller.
Retired
No product available!
No product available!
No product available!
The miniature digital potentiometer allows you to replace the analog potentiometer and control the resistance value using two buttons. The module contains inputs of the UP / DOWN buttons (for increasing and decreasing the resistance) and outputs in accordance with the analog potentiometer A, W, B (description on the circuit board). MOD-19.Z
Retired
No product available!
Xmega eXploreGO module with ATXmega128A4U microcontroller (version without MP3). The module is equipped with in DataFlash memory, microSD card connector. MOD-20 / AZ
Retired
No product available!
MOD-21.Z - push button module with bistable operation. The sensor operates based on the AT42QT1012 system.
Retired
No product available!
The Raspberry Pi GPIO connector adapter allows you to output signals from Raspberry Pi to the contact plate. Two LEDs indicate +3.3V and +5V power supply
Retired
No product available!
No product available!
MOD-25.Z - touch sensitive button module with monostable function. The sensor operates based on the AT42QT1011 system.
Retired
No product available!
264x176, 2.7inch E-Ink display HAT for Raspberry Pi, three-color, SPI interface