WEP 926LED V3 Orange - 60W soldering station

Soldering station 2 in 1: hotair 100..480 st. C, soldering iron 75W 200..480 st. C. The station has a built-in PID control, settings are displayed on the LCD display

Soldering station 2 in 1 for hot air and arrowhead. With original Japanese heating elements Hakko and PID controller correcting the temperature on an ongoing basis.

Hotair soldering station 100..480 deg. C, soldering tip 75W 200..480 deg. C. Settings are displayed on LED displays

The WEP 937D soldering tip station has smooth temperature control in the range from 200 ° C to 480 ° C. Thanks to the built-in temperature sensor in the heater and LED display, you can set the desired temperature very precisely. WEP 937D

Soldering station WEP 937D + with smoothly adjustable temperature in the range from 200 to 480 ° C, temperature sensor and LED display.

YIHUA 938BD soldering station + thermocouple + 2 in 1 flask

WEP 878D soldering station is a station with hot air soldering iron (hotair) and 50W soldering iron. It is used in electronic services for safe soldering QFP, BGA, SMD, PLCC and other temperature sensitive components. WEP 878D

3in1 soldering station connecting hot air soldering iron, soldering iron and heater. Station with a power of 1270 W. Excellent for dismantling SMD and BGA systems. YIHUA 853AAA

WEP 938 soldering station is a powerful soldering iron that quickly reaches the set temperature and quickly compensates for heat loss during operation. Thanks to this, you can solder at a lower temperature compared to cheaper soldering irons with slow temperature compensation. The station has the functions: temperature memory, sleep function, automatic shutdown. WEP 938

75W soldering station, temperature 200..480 degrees C.

The WEP 968DA + soldering station is a hot air station and a soldering iron with LED display. It is equipped with a SAMSUNG microprocessor that checks the station\'s operating parameters and corrects them to the set values. The station is suitable for soldering and desoldering electronic components such as SOIC, CHIP, QFP, PLCC, BGA, SMD. WEP 968DA+

The WEP 898DB soldering station is a small and functional tool designed for professional work. It has a hot air and tip soldering iron, has the ability to adjust the temperature and air blast power and two LED displays showing the temperature for both soldering irons. WEP 898DB

Soldering station 5 in 1: hotair (100-480 deg. C), soldering tip 60W, service power supply 0-15V / 1A, RF signal tester and voltage meter. Included, among others set of nozzles and gripper for integrated circuits

Soldering station with a soldering iron (100 ° C ... 480 ° C) and a soldering iron with a power of 75W (200 ° C ... 480 ° C). It has 4 LED displays, a 30V 5A service power supply, and a set of 4 nozzles

WEP 872D is a 2-in-1 soldering station with separate control of the hot-air and soldering iron handles, offering a temperature range up to 480 °C and digital PID regulation. Thanks to compressor-based airflow, a wide selection of nozzles and tips, and an ESD-Safe system, it is suitable for electronics servicing, assembly work and SMT/BGA repair tasks.

Soldering iron with smooth regulation of digitally controlled air discharge, with temperature regulation in the range of 100 ° C to 500 ° C