WEP 992D 75W Hot air / grotter Rework Station
ID: 575820
5906623435548
zł609.59
Tax included
zł495.60 tax excl.
Soldering station 2 in 1 for hot air and arrowhead. With original Japanese heating elements Hakko and PID controller correcting the temperature on an ongoing basis.
Description
WEP 992D is a 2in1 soldering station that connects a hot air soldering iron with a soldering iron. The station is equipped with an advanced PID controller correcting the temperature every 20 ms, allowing to obtain a stable temperature, even when soldering large parts with a soldering iron. Original Japanese Hakko heating elements make the soldering iron warm up in less than 1 minute. The station is equipped with a readable LCD display showing the current temperature of the soldering irons and the power of the blow. The temperature can be set using the buttons, while the power of the blast is put in a convenient potentiometer. The soldering iron is equipped with an automatic cooling function when the soldering iron is not used, in the case of a hot air soldering iron the breaker is in the handle, so after the soldering iron is automatically cooled, in the case of a soldering iron you can set the time after which the soldering iron cools down to 200 ºC , which significantly extends the life of the heater. The built-in error control system will inform the user through a message on the display in the event of a short circuit, overloading of circuits or failure to achieve the desired temperature. A wide range of available tips allows soldering not only leaded components, but also SMD in housings such as QFP, SOIC or PLCC, while a hot air solder compatible with many nozzles will work perfectly when soldering components in more demanding cases such as BGA.
Specification
- PID controller correcting the temperature every 20 ms
- Microprocessor control of parameters: temperature, power of blowing, working time
- Compact design with a legible LCD display
- Temperature display mode ° F / ° C
- Properties of the hot air soldering iron
- Air flow source: fan built into the flask
- Air flow: up to 120 l / min
- Temperature range: 100-480 ° C
- Temperature stability: 1 ° C
- Cord length: 100 cm
- Protection against reaching too high temperature and informing by alarm
- Automatic cooling mode of the flask after putting it back in the holder
- Displays the actual blowing power
- Properties of the soldering iron
- Temperature range: 200 - 480 ° C
- Temperature stability: 1 ° C
- Heating power: 75 W
- Original Hakko heating element of Japanese production
- Grounding resistance below 2 ohms
- Ground potential below 2 mV
- System: ESD safe
- The length of the flask wire: 100 cm
- Sleep mode: switched on after idle operation 0-99 minutes (value 0 disables the function)
Included
- WEP 992D soldering station
- Handle a hotair flask
- Nozzle set:
- Round nozzle with diameter 4.4 mm 1130
- Round nozzle with a diameter of 7 mm 1196
- Round nozzle with a diameter of 9 mm 1197
- Square nozzle 12x12 mm 1313
- A stand for a tipped flask with cleaning sponge and cleaner
- Graduated flask 907I with T-B conical grip
- Gripper for lifting systems
- Power cord
575820
Data sheet
- Station type
- 2in1 (tip soldering iron + hotair)
- Tip soldering iron temperature
- 200 - 480 °C
- HotAir temperature
- 100 - 480 °C
- Power
- 75 W
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
RF800 flux is a medium-active rosin solution that does not require washing. AG Termopasty ART.AGT-042
zł4.66
24h
Available quantity: 20
Available
Rosin for soldering with addition of activators, thanks to which this rosin has activity similar to solder paste. The packaging contains 40g of flux. AG Termopasty ART.AGT-034
zł4.43
24h
Available quantity: 44
Available
The most popular Sn60Pb40 SW26 solder is a high-quality lead product with SW26 flux, intended for professional soldering in electronics and electrical engineering, meeting the EN ISO 9453:2014 standard
zł62.99
24h
Available quantity: 14
Available
The sponge is indispensable at the time of soldering, it removes tin residues and stains from the tip. Dimensions 55x55mm
zł3.90
24h
Available quantity: 9
Available
Thickened rosin flux intended for SMT assembly and repair. In a 10 ml cartridge. AG Termopasty ART.AGT-179
zł20.95
24h
Available quantity: 21
Available
Other products in the same category (16)
No product available!
Soldering station 60W, temperature control in the range of 200°C to 500°C. WEP 926
Unavailable
zł57.00
1 weeks
No product available!
Soldering station 2 in 1: hotair 100..480 st. C, soldering iron 75W 200..480 st. C. The station has a built-in PID control, settings are displayed on the LCD display
zł742.90
1 weeks
No product available!
WEP 937D + soldering station with smoothly adjustable temperature in the range from 200 ° C to 480 ° C, temperature sensor and LED display. WEP 937D +
zł182.80
1 weeks
No product available!
The WEP 898DB soldering station is a small and functional tool designed for professional work. It has a hot air and tip soldering iron, has the ability to adjust the temperature and air blast power and two LED displays showing the temperature for both soldering irons. WEP 898DB
zł359.98
1 weeks
No product available!
Soldering iron with smooth regulation of digitally controlled air discharge, with temperature regulation in the range of 100 ° C to 500 ° C
zł214.89
24h
Available quantity: 1
Available
75W soldering station, temperature 200..480 degrees C.
zł173.84
1 weeks
No product available!
WEP 968DB + is a hot air soldering station and a tip soldering iron with a peak power of 70 W with fume extraction from under the tip. It is used for soldering of electronic components, shrinking, welding of plastics, heating. The station is equipped with a SAMSUNG microprocessor that checks the operating parameters of the station and corrects them to the set values. WEP 968DB+
zł507.05
1 weeks
No product available!
Soldering station HotAir + Flask Yihua 878D 700W 100-450 ° C (Repro)
zł218.28
24h
Available quantity: 1
Available
The WEP 995D soldering station is a station consisting of a hot air soldering iron and a tip soldering iron (75 W). It has a PID controller, LCD display, adjustable temperature and air blow out provided by the fan located in the flask. It is used for soldering and desoldering electronic components such as: SOIC, CHIP, QFP, PLCC, BGA, SMD. WEP 995D
zł573.76
1 weeks
No product available!
The WEP 937D soldering tip station has smooth temperature control in the range from 200 ° C to 480 ° C. Thanks to the built-in temperature sensor in the heater and LED display, you can set the desired temperature very precisely. WEP 937D
zł175.50
24h
Available quantity: 1
Available
5W1 soldering station with 800 W power: Hotair, soldering iron, service power supply 0-15V/1A, RF signal tester and voltage meter. The set includes a set of nozzles and a gripper for integrated circuits. YIHUA 853D
zł511.68
1 weeks
No product available!
Hot air soldering station with smooth regulation of air outlet. Digitally controlled, with display. YIHUA 858D
zł166.27
24h
Available quantity: 2
Available
The WEP 968DA + soldering station is a hot air station and a soldering iron with LED display. It is equipped with a SAMSUNG microprocessor that checks the station\'s operating parameters and corrects them to the set values. The station is suitable for soldering and desoldering electronic components such as SOIC, CHIP, QFP, PLCC, BGA, SMD. WEP 968DA+
zł482.65
1 weeks
No product available!
3in1 soldering station connecting hot air soldering iron, soldering iron and heater. Station with a power of 1270 W. Excellent for dismantling SMD and BGA systems. YIHUA 853AAA
zł907.78
24h
Available quantity: 1
Available
Soldering station with a soldering iron (100 ° C ... 480 ° C) and a soldering iron with a power of 75W (200 ° C ... 480 ° C). It has 4 LED displays, a 30V 5A service power supply, and a set of 4 nozzles
zł808.29
24h
Available quantity: 1
Available
Soldering station 2 in 1 for hot air and arrowhead. With original Japanese heating elements Hakko and PID controller correcting the temperature on an ongoing basis.