![CP2100B - current probe for Micsig oscilloscope CP2100B - current probe for Micsig oscilloscope](https://kamami.pl/43556-large_default/cp2100b-current-probe-for-micsig-oscilloscope.jpg)
![CP2100B - current probe for Micsig oscilloscope CP2100B - current probe for Micsig oscilloscope](https://kamami.pl/43556-large_default/cp2100b-current-probe-for-micsig-oscilloscope.jpg)
zł997.80 tax excl.
Probe for measuring direct and alternating current up to 100 A. It works in the 2,5 MHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100B
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Probe for measuring DC and AC current up to 100 A. Uses standard BNC interface and can be connected to an oscilloscope or a multimeter. It works in the 2,5 MHz band, has two measuring ranges: 10 and 100 A. The probe can work with manual or automatic regulation and is powered by the USB connector. It can be used in industry, automotive electronics, power supplies and inverters. Dedicated to Micsig devices.
Portable tBook mini oscilloscope with 8 "LCD display and touch screen. It has two measuring channels and is characterized by good measurement parameters: 150 MHz band, sampling rate of 1 GSa/s and 28 Mpts memory buffer. Micsig TO1152 Plus
No product available!
Portable oscilloscope for automotive applications with 8-inch LCD display and touch screen. It has four measurement channels and is characterized by good measurement parameters: 100 MHz band, sampling rate 1 GSa/s and memory buffer 28 Mpts. Micsig ATO1104
No product available!
Portable Smart oscilloscope with 8-inch LCD display and touch screen. It has two measurement channels and is characterized by good measurement parameters: 150 MHz band, sampling rate 1 GSa/s and memory buffer 28 Mpts. Micsig STO1152 Plus
No product available!
High voltage differential probe. It has good measurement parameters: 100 MHz band and operating voltage up to 1300 V. The probe has two damping factors: 50X and 500X. Micsig DP10013
Test probe tip with 1000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 100 MHz and 200 MHz frequency bands. Micsig OP1000-2
No product available!
6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-1.5mm
No product available!
A universal oscilloscope probe with a BNC connector and a 10:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 600 V. Hantek PP-150
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 500 MHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. Micsig MOIP05P
No product available!
Universal oscilloscope probe with BNC plug with 100: 1 voltage divider and 100 MHz bandwidth. It allows you to perform measurements with a maximum voltage of 2 kV
Universal measurement probes for a multimeter. Compatible with all Micsig oscilloscopes. Micsig MS-A-005
Probe for measuring direct and alternating current up to 30 A. Works in the band up to 50 MHz, can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP503B
No product available!
Cable (adapter) of a BNC connector to banana plugs. Allows convenient connection of the device to an oscilloscope, for example. Hantek HT30A
An oscilloscope probe designed to analyze signals generated by the ignition coil in car engines. It is compatible with most digital oscilloscopes. Micsig MS-A-008
A probe for measuring AC and DC currents up to 65 A. It operates in a bandwidth of up to 20 kHz and can be connected to an oscilloscope via a BNC connector. Hantek CC-65
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 800 MHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. Micsig MOIP08P
No product available!
Test probe tip with 500X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 100 MHz and 200 MHz frequency bands. Micsig OP500-2
No product available!
Test probe tip with 1000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 800 MHz and 1 GHz frequency band. Micsig OP1000-1G
No product available!
Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 100 MHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. Micsig MOIP01P
No product available!
Micsig MDP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 200 MHz and the ability to measure voltage up to 700 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig MDP702
No product available!
Universal oscilloscope probe with BNC connector. It has a voltage divider of 10:1 and offers a frequency response of 100 MHz. It allows measurements with a maximum voltage of up to 600 V. P6100
No product available!
Probe for measuring direct and alternating current up to 100 A. It works in the 2,5 MHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100B