Step-down converter 3.6–25 V DFRobot DFR0205
ID: 1194852
5902186303256
zł36.88
Tax included
zł29.98 tax excl.
DFRobot DFR0205 is a compact and efficient step-down DC-DC converter module with up to 25 W of power, allowing adjustment of the supply voltage to meet the needs of various electronic components. With a voltage regulation function, a quick 5 V selection switch, and an Ovout interface, it enables simultaneous power delivery to components with different voltage requirements. Ideal for prototyping, mobile projects, automation systems, and IoT applications.
Description
Step-down (Buck) switching converter module with a maximum output power of 25 W, designed to convert a DC input voltage from 3.6 V to 25 V into a regulated output voltage ranging from 3.3 V to 25 V. It is intended for powering components that require a stable voltage lower than the input supply. Operating at a switching frequency of 350 kHz, it provides a constant output current of 5 A at 5 V. Ideal for rapid prototyping, the module offers three output interfaces and an additional source voltage output (Ovout), which exposes the raw input voltage. The ON/OFF function, controllable via microcontroller or digital signal, allows easy power management in complex circuits.
Properties
- Input voltage range: 3.6 V – 25 V
- Output voltage range: 3.3 V – 25 V (adjustable via potentiometer)
- Output current: 5 A at 5 V
- Maximum output power: 25 W
- Operating frequency: 350 kHz
- Switch for selecting 5 V or adjustable output
- Three output interfaces for converted voltage
- Additional output for input voltage (Ovout)
- ON/OFF control input (enabled by high logic level)
- Dimensions: 46 × 50 × 20 mm
1194852
Data sheet
- Output voltage
- 3,3 - 25 V
- Output current
- 5A
- Converter type
- Step-down
- Supply voltage min
- 3,6 V
- Supply voltages max
- 25 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
An efficient step-down converter that steps down the input voltage from as low as 45 V to a regulated output voltage range of 1.4 to 7 V, offering high efficiency and a maximum continuous current of 3.4 A. It has built-in reverse polarity, overload and short circuit protection, and the spread spectrum function reduces EMI interference. Pololu 4873
zł109.35
24h
Available quantity: 4
Available
Step-Down DC-DC converter module based on the D36V6F3 system. Input voltage 4 ... 50V, output voltage 3.3V (max. 600mA). Polol 3791
zł21.45
4 weeks
No product available!
The compact (0.4″ × 0.5″) D24V5F1 synchronous buck voltage regulator takes input voltages between 3 V and 36 V and efficiently reduces them to 1.8 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 75% and 90%. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
zł35.09
24h
Available quantity: 3
Available
A power supply based on a DC-DC converter with a current capacity of up to 5.1 A. The input voltage can range from 5 V to 30 V, while the output voltage is adjustable from 0 V to 36 V. XY3605
zł277.72
24h
Available quantity: 2
Available
The Step-Down D24V6F12 Buck Voltage Regulator module gives the output voltage of 12V with a wide input voltage range of 15-42V and a maximum output current of 600 mA. Pololu 2109
zł34.82
4 weeks
No product available!
Step-Down XL4015 converter module with adjustable output voltage in the range from 1.25 to 36 V with a wide input voltage range from 4 to 38 V and a maximum output current of 5 A
zł9.73
4 weeks
No product available!
The compact (0.4″ × 0.5″) D24V5F2 synchronous buck voltage regulator takes input voltages between 3 V and 36 V and efficiently reduces them to 2.5 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 80% and 90%. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
zł35.08
4 weeks
No product available!
Step-Down converter D36V28F5 with an output voltage of 5 V, an input voltage from 5.3 to 50 V and a maximum output current of 4 A. Pololu 3782
zł80.90
24h
Available quantity: 2
Available
Available
Step-Down converter D36V50F12 with an output voltage of 12 V, an input voltage from 13.3 to 50 V and a maximum output current of 6.5 A. Pololu 4095
zł158.76
24h
Available quantity: 3
Available
The Step-Down D24V6AHV Buck Voltage Regulator module with adjustable output voltage in the range of 4-25V with a wide input voltage range of 4.5-42V and a maximum output current of 600 mA. Pololu 2104
zł37.77
4 weeks
No product available!
Efficient step-down converter that reduces the input voltage from up to 45 V to a regulated output voltage range from 1.4 to 7 V, offering high efficiency and a maximum continuous current of 3.8 A. It has built-in protection against reverse polarity, overload and short circuit, and the spread spectrum function reduces EMI interference. The module is equipped with an additional potentiometer for adjusting the cut-off voltage. Pololu 4852
zł126.22
24h
Available quantity: 5
Available
The Step-Down D24V3AHV Buck Voltage Regulator module with adjustable output voltage in the range of 4-25V with a wide input voltage range of 4.5-42V and a maximum output current of 300 mA. Pololu 2102
zł30.65
24h
Available quantity: 1
Available
Step-Down DC-DC converter module based on the D36V6F5 chip. Input voltage 5.2..50V, output voltage 5V (max. 600mA). Pololu 3792
zł21.46
4 weeks
No product available!
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 3.3 V with an available output current of around 15 A. Pololu 2880
zł465.09
4 weeks
No product available!
Pololu 2830
zł43.01
24h
Available quantity: 4
Available
DFRobot DFR0205 is a compact and efficient step-down DC-DC converter module with up to 25 W of power, allowing adjustment of the supply voltage to meet the needs of various electronic components. With a voltage regulation function, a quick 5 V selection switch, and an Ovout interface, it enables simultaneous power delivery to components with different voltage requirements. Ideal for prototyping, mobile projects, automation systems, and IoT applications.